All Products

SKU: SF-KIT-15081

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone. If you aren’t sure which Qwiic cable to use, this handy box includes all of them allowing you to save a little money and ...

SKU: AF-4328

A 10-pack of JST SH 4-pin vertical connectors with 1 mm pitch through-hole mounting tabs. These micro connectors are compatible with the Qwiic/STEMMA QT ecosystem, making them perfect for adding I²C connectivity to custom PCBs. The solid plastic housings feature through-hole pins that can also b...

SKU: AF-4208

A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to your own PCB designs. The solid plastic housing accepts standard Qwiic cables, an...

SKU: SF-PRT-10030

This 2 mm pitch 10-pin SMD socket mates with XBee radio modules from Digi. The surface-mount design is ideal for custom PCBs and production boards where through-hole mounting isn't suitable. You'll need two of these sockets to connect to all 20 pins on an XBee module. Key Features 2 mm Pitch ...

SKU: SF-GPS-09079

This is a vertical 10-pin SMD connector designed for use with the GS406 helical GPS receiver module. It provides a surface-mount interface for connecting the GS406 to your custom PCB, enabling access to the module's serial data, power, and control pins. Key Features 10-Pin SMD – Vertical surfa...

SKU: AF-6182 · MPN: ADA6182

A 10-wire silicone-covered ribbon cable that's extremely supple and flexible. The silicone sheathing handles temperatures up to 200°C and voltages up to 600 V — far beyond what PVC-covered wire can manage. Pull and separate individual wires as needed. Key Features 10 Wires – Separable ribbon f...

SKU: SF-CAB-22726

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the male pins on various development platforms. This cable is also a great way to atta...

SKU: SF-PRT-11641 · MPN: PRT-11641

This compact two-pin connector is designed for surface-mount PCB layouts where you need a low-profile, right-angle connection. Its small footprint makes it well suited to tight electronics builds and embedded projects.The connector has a solid locking feel and is noted for its high current rating...

SKU: DF-FIT0112

A pack of 10 colour-coded alligator-to-alligator clip test cables for quick, hands-free circuit connections. Each cable features strong, grippy clips on both ends and heavy-insulation copper wire — ideal for prototyping, testing, and classroom electronics projects. Key Features Alligator Clips...

SKU: SF-PRT-11542

A standard 0.1" (2.54 mm) pitch male header pin strip with 10 pins, designed for surface-mount applications where through-hole pins are not suitable. The SMD legs are staggered for stress relief during soldering. Key Features 10-Pin Male Header – Standard 0.1" (2.54 mm) pitch Surface Mount – ...

SKU: SF-WRL-30678 · MPN: WRL-30678

Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RISC-V single-core microprocessor with 8MB Flash and 8MB PSRAM for connected proje...

SKU: DF-FIT0514

These wire offers you the best way to connect sensors and actuators to your LattePanda! They are specially designed for LattePanda and DFRobot Gravity Sensors. It compatible with a wide range of Gravity sensors and is easy to connect thanks to the unique anti-reverse-polarity design. It incl...

SKU: SF-PRT-27911 · MPN: PRT-27911

This female header is designed for surface-mount applications where through-hole pins are not suitable. It uses standard 0.1 inch spacing, making it useful for compact PCB layouts and common maker electronics projects.The surface-mount legs are staggered to help with stress relief once soldered t...

SKU: DF-FIT0100

A pack of 10 right-angle male header strips, each with 40 breakable pins at 2.54mm pitch. The 90° bend allows horizontal connections from vertically mounted PCBs, ideal for compact enclosures and edge-mounted connectors. Snap or cut the strips to any size needed for custom PCBs or general protot...

SKU: DF-FIT0105

A pack of 10 long straight male header strips, each with 40 breakable pins at 2.54mm pitch. The extended 10mm pin length allows socket-to-socket connections, and the plastic separator can be repositioned along the pins to suit your application. Snap or cut the strips to any size needed for custo...

SKU: SF-DEV-18158 · MPN: DEV-18158

This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Uno R3 footprint, so it is a straightforward choice if you want broad compatibilit...

SKU: SF-LCD-24606 · MPN: LCD-24606

The SparkFun Qwiic OLED Display is a compact 0.91″ (diagonal) monochrome OLED screen with 128 × 32 pixel resolution, capable of displaying up to four lines of text. As an OLED, it has no backlight layer — resulting in a thinner profile, lower power consumption, and higher contrast compared to LCD...

SKU: SF-PRT-22890 · MPN: PRT-22890

This compact unshrouded header provides a 2x5 pin connection in a fine 1.27mm pitch format, making it suitable for densely packed boards and small interconnects.It is an SMD header, so it is intended for surface-mount PCB layouts rather than through-hole mounting. The unshrouded design keeps the ...

SKU: DF-FIT0106

A pack of ten 6-pin female headers with standard 0.1″ (2.54mm) pin spacing. Commonly used for Arduino shield connections and general prototyping. Key Features Standard 0.1″ Pitch – Compatible with breadboards, Arduino, and most development boards 6-Pin Configuration – Matches common Arduino a...

SKU: SF-PRT-21328 · MPN: PRT-21328

This 10-position right-angle terminal block header is made for secure, pluggable wire-to-board connections on a PCB. Solder it directly to your board and use it as the receptacle for a removable screw terminal block.It is well suited to I/O signals and power lines that may need to be disconnected...