All Products

SKU: AF-344

Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables. We use this stuff all the time and having a zip-lock bag of all the possible sizes is super handy. Pack conta...

SKU: TB-WH5682

A 5-metre roll of 2:1 ratio heatshrink tubing in black, with a 3 mm pre-shrink diameter. Shrinks to half its original size when heated, providing insulation, strain relief, and protection for solder joints, wire splices, and cable connections. Supplied in a neat box for workshop storage. Shrink ...

SKU: SF-PRT-09353

A 95-piece heat shrink tubing kit in multiple colours and sizes, all cut to a convenient 10cm length. Use heat shrink to reinforce solder connections, protect devices, electrically insulate exposed joints, and add colour coding to your wiring. Select sizes include heat-sensitive adhesive lining ...

SKU: LB-LS2788

A 100-piece assortment of solder seal heat shrink butt connectors in four sizes. These connectors combine soldering, insulation, and waterproof sealing into a single step — just apply heat and the solder ring melts to join the wires while the polyolefin tubing shrinks and the hot-melt adhesive se...

SKU: AF-1649

Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores.  This heat shrink comes in six different colors - red, blue, green, yellow, white and the traditional black. Each pack contains ten 6" piec...

SKU: TB-WH5683

Jaycar 2:1 heatshrink tubing in a convenient 5-metre roll, ideal for insulating solder joints, bundling wires, and protecting cable terminations. The 5mm diameter shrinks down to 2.5mm, providing a snug, protective sleeve over connectors and splices. Sold in a stackable box (49 × 177 × 165 mm) t...

SKU: AF-1020

We decided to stock this food-safe heat shrink specifically for people who were building beer-brewing or sous-vide projects using our waterproof DS18B20+ digital temperature sensors. This heat shrink is FDA Compliant for contact with food. The end of the sensor is stainless steel, but the jack...

SKU: LB-LS0111

Heat Shirnk to fit your evey need!  This has 9 sizes and 7 colours all in a handy little box so you can keep your heat shrink neet and tidy.  

SKU: SF-PRT-17054

Thermally Conductive Adhesive Transfer Tapes are designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or heat pipes).This is a 4x4" diameter, 0.2mm thickness piece of thermal tape.

SKU: AF-6308 · MPN: ADA6308

Perfect for a variety of small projects, these adhesive squares provide a strong bond to most surfaces and are an excellent way to attach heat sinks to a chip.Each tab is 0.5" (12.7mm) square and 1.25mm thick. You get 10 in a pack!

SKU: AF-4255

Brass heat-set inserts provide strong, reusable threaded connections in 3D-printed and injection-moulded plastic parts. Each insert has a knurled outer surface that grips the surrounding plastic when pressed in with a heated soldering iron, and an M3 internal thread that accepts standard machine ...

SKU: AF-584

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Green. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or recharge...

SKU: AF-545

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Aqua, the brightest and best looking EL color we carry. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Poc...

SKU: AF-586

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Orange. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or recharg...

SKU: AF-4256

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws directly into your 3D prints, use strong and reusable machine screws and heat-set inserts. Heat set inserts are only a few ...

SKU: AF-585

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in yellow. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or recharg...

SKU: AF-3084

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi  but is best paired with a Raspberry Pi 3 since it can run a little hot....

SKU: AF-587

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Red. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargeab...

SKU: AF-546

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in White. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargeabl...

SKU: AF-583

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Blue. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargea...