All Products

SKU: AF-1484

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 6mm pitch. The larger pitch provides good visibility at greater distances, making it suitable for signage and larger-scale displays. Pre-balanced white output and a 1:16 scan rate with 12 × 16-bit latches handle the display multiplexing. ...

SKU: DF-DFR0471

A 32×16 full-colour RGB LED matrix panel with 512 individually addressable pixels at 6mm pitch. Each LED can display any colour, making this panel suitable for text, animations, and graphics. The high-brightness LEDs and wide 160° viewing angle work well for both indoor and outdoor installations....

SKU: SF-COM-14646

A 32×32 RGB LED matrix panel with 1024 individually addressable LEDs on a 190 × 190 mm (7.5 × 7.5″) board. The seamless frame and dual IDC connectors allow multiple panels to be daisy-chained together for larger displays. The panel requires a regulated 3.3–5V power supply capable of sourcing up ...

SKU: SF-COM-12584

Are you looking to add a lot of color to your project? These massive 32x32 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read that right: a 32x32 LED matrix, that’s 1024 LEDs on a 7.5" x 7.5" board. On top of...

SKU: AF-420

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate using 12 digital pins and a 5V supply. These panels are designed for high-speed pr...

SKU: AF-5201

The Adafruit IS31FL3741 RGB LED Matrix features 117 individually addressable RGB LEDs arranged in a 13×9 grid with 3 mm pitch spacing. Each 2×2 mm LED is driven by the ISSI IS31FL3741 controller chip over I2C, providing 8-bit PWM per colour channel for full 24-bit colour across the entire display...

SKU: AF-607

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 4mm pitch, measuring approximately 5 inches (128mm) square. These panels are commonly used in video walls and signage, delivering bright, vivid colours with good white balance uniformity. On the back, dual IDC connectors (input and output...

SKU: AF-4631

A pack of four magnetic mounting feet designed for RGB LED matrix panels. At 16.6 mm long, each magnet-screw slots into the standard 3 mm mounting bosses found on most RGB matrix panels, providing a quick and secure way to display your project on any magnetic surface. Compatible Panels 16×32 RG...

SKU: PR-PIM727

An all-in-one, RP2350 powered controller for HUB75 LED matrix panels. Interstate 75 W is a RP2350-based driver board for HUB75-style LED matrices - they're the chainable LED panels that you sometimes see making up video walls or big advertising displays. It's designed to plug neatly into the bac...

SKU: AF-2026

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 5mm pitch. Designed for indoor use with a wide 160° viewing angle and pre-balanced white output, these panels look great in ambient light. The slightly larger pitch than 4mm panels makes them well-suited for displays viewed at moderate di...

SKU: AF-4745

The Adafruit Matrix Portal is a plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by an ATSAMD51 (Cortex M4) with an ESP32 WiFi coprocessor, it plugs directly into the back of any compatible matrix — no soldering or wiring required. Just attach power and start coding in CircuitPy...

SKU: AF-2871

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGBW LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour and white. Arranged in an 8×8 matrix, each pixel is individually addressable with just one microcontroller pin, delivering 32-bit colour (8-bit PWM...

SKU: AF-2870

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGBW LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour and white. Arranged in an 8×8 matrix, each pixel is individually addressable with just one microcontroller pin, delivering 32-bit colour (8-bit PWM...

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...

SKU: AF-2345

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can keep accurate time even after reboots or power loss — perfect for clock and time-...

SKU: AF-1902

The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphics, patterns, or animated GIFs using the SmartMatrix Library. The shield include...

SKU: AF-4702

The Adafruit RGB Matrix FeatherWing Kit for nRF52840 lets you drive HUB75-type RGB LED matrices from nRF52840-based Feather boards. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosyst...

SKU: AF-5800 · MPN: ADA5800

Built for larger TTL-interface TFTs, this development board makes it much easier to experiment with 40-pin RGB-666 displays using an ESP32-S3. It is aimed at panels that go beyond the usual SPI-driven sizes and resolutions, including square, round and bar-style displays that need continuous pixel...

SKU: AF-3036

The Adafruit RGB Matrix FeatherWing Kit lets you drive HUB75-type RGB LED matrices from any SAMD21 M0 or SAMD51 M4 Feather board. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosystem...

SKU: AF-5036

The 64×32 RGB LED Matrix Panel with 2.5mm pitch packs 2048 bright RGB LEDs into a compact 160×80mm panel. With the tightest pixel spacing in the 64×32 range, this panel produces sharp, detailed images ideal for close-up indoor viewing. The panel features two IDC connectors on the back (input and...