All Products

SKU: LB-LR0121L

This HD 7-inch Touch Screen Display is an affordable way to add video output to your Raspberry Pi.  The display has a resolution of 1024 x 600, and supports the Raspberry Pi 3 Model B(and other hardware such as the Banana Pi and Orange Pi, Beaglebone Black etc). The display connects to your...

SKU: WS-24693

A 7-inch IPS touch display kit designed specifically for Raspberry Pi Zero. Features specially designed connectors for Pi Zero, allowing you to build a compact all-in-one mini computer with a high-resolution touchscreen. The 1024×600 IPS panel provides wide 170° viewing angles with fast response...

SKU: DF-FIT0478

This capacitive touch panel overlay adds touch input to your LattePanda 7" IPS Display (sold separately). Simply apply the adhesive panel over the display, connect the FPC cable, and power the board for a complete touch interface. The panel features 6H surface hardness for scratch resistance, 85...

SKU: AF-1947

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...

SKU: WS-25270

A 7-inch IPS capacitive touchscreen display with a DSI interface, designed for Raspberry Pi. Features 800×480 resolution, 170° wide viewing angle, and 5-point touch with a toughened glass panel (6H hardness). Available with an optional ABS case for Pi 4B. Driver-free on Raspberry Pi OS with full...

SKU: AF-2340

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clips to the HAT and the other end to anything conductive (metal, fruit, vegetables,...

SKU: DF-DFR0129

A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recognition. The MPR121 provides sensitive capacitive detection over an I²C interface...

SKU: AF-2024

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...

SKU: PR-PIM272

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: AF-4830

The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip conductive materials to the pads and plug into your board's I2C port. The MPR121 h...

SKU: AF-333

A 4-wire resistive touch screen digitiser (originally designed for the Nintendo DS Lite) that works with a stylus or fingertip. It can be used with any microcontroller that has 2 digital pins and 2 analogue input pins, making it easy to add touch input to your projects — either as a standalone to...

SKU: PR-PIM401

Six handy touch-sensitive buttons and LEDs for your micro:bit. Use touch:bit as a controller for games on micro:bit's LED matrix, or combine it with the radio functionality and use it as a controller for your robot. Just slot in your micro:bit, then code touch:bit with the block-based Mic...

SKU: AF-5767

The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing over SPI and provides an interrupt pin that signals when a touch is detected. The ...

SKU: SF-SEN-14520

The SparkFun Capacitive Touch Breakout provides a single momentary touch button using the AT42QT1011 capacitive sense chip. Simply supply 1.8–5 V and ground — the chip handles all touch monitoring and outputs a digital high signal when a touch is detected, low when released. Unlike the AT42QT101...

SKU: AF-3575

The Adafruit Touch Screen Breakout Board provides a simple way to connect a 4-wire resistive touch panel with a 1.0mm pitch FPC connector to your project. The connector is soldered onto a compact breakout board, with the four resistive wires broken out to standard through-hole pads for easy bread...

SKU: AF-5423

The Adafruit TSC2007 is an I2C resistive touch screen controller that offloads touch reading from your microcontroller. Instead of using multiple analog pins and constant polling, the TSC2007 handles all the touch sensing over a simple I2C connection and provides an interrupt pin that signals whe...

SKU: AF-1982

The Adafruit MPR121 Capacitive Touch Sensor Breakout provides 12 channels of capacitive touch sensing over I2C. The MPR121 handles all the capacitive filtering internally and can be configured for varying sensitivity levels, making it far easier to use than raw analog capacitive sensing. With fo...

SKU: LB-LR0214-47

This is a touch sensor for Arduino.   This sensor is a toggle output type: touch-on then touch-off. Onboard TTP223 touch capacitive touch sensor IC.  With an on-board-level status indicator. Working voltage: 2.0V-5.5V PCB board size: 29 (mm) x16 (mm)

SKU: AF-1333

This membrane keypad has a single key, but it does have an embedded surface-mount red LED installed. The flex cable is also extra-long, so we can think of a lot of wearable and portable projects that would use this sort of switch and have an LED as feedback (say, to indicate that an action is occ...

SKU: SF-SEN-15344

Do you want to replace a slider or a button on your art project or science experiment with a more interesting interface? This Capacitive Touch Slider is a "Qwiic" and easy way to add capacitive touch to your next project. With the board's built in touch pads, you can immediately start playing wit...