All Products

SKU: AF-1578

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: LB-LS1558

A standard 18650 lithium-ion rechargeable battery with a built-in protection circuit for safe operation. The integrated PCB provides overcharge, over-discharge, and short-circuit protection, making it a reliable power source for electronics projects and portable devices. Key Features 2500 mAh ...

SKU: AF-2750

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about 1.3 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: AF-1317

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh. If you need a larger battery, we have a full range of bigger cellsThe b...

SKU: AF-328

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you need a smaller battery, we also have a 1200mAh model The batter...

SKU: SF-PRT-11892

Now for all of your coin cell battery surface mount needs, the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the battery and the PCB pad underneath is connecte...

SKU: AF-1871

A sewable breakout board with a CR2032 coin cell battery holder, built-in on/off switch, and 0.1" pitch breakout pins. The board provides two ground pins, one switched power pin, and one always-on power pin — giving you flexibility in how you manage power in your project. Also available: version...

SKU: AF-3898

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: LB-00238

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh.The batteries come pre-attached with a genuine 2-pin JST-PH connector a...

SKU: DF-FIT0611

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen. Using this environment-friendly product, you can save about 200 batteries in on...

SKU: AF-4712

The Adafruit LC709203F Fuel Gauge monitors your single-cell LiPo or Li-Ion battery and reports both voltage and state of charge as a percentage over I2C. It handles the non-linear voltage-to-percentage conversion for you, so your project always knows exactly how much battery is left — just like t...

SKU: AF-727

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...

SKU: AF-654

A standard CR2032 lithium coin cell battery providing 3V nominal output. This non-rechargeable cell is widely used in electronics projects, wearables, and sewable circuits. Specifications Type – CR2032 lithium coin cell (non-rechargeable) Nominal Voltage – 3V (starts at ~3.2V, drifts to ~2.5V...

SKU: AF-2272

This battery holder is designed to clip and hold Panasonic camcorder lithium-ion battery packs, providing a convenient high-capacity power source for custom projects. Simply snap your battery in, and use your existing charger to top it up when needed. Compatible Batteries Panasonic CGR-D28 – 7...

SKU: AF-783

A compact coin cell battery holder designed for small portable and wearable electronics projects. It holds two 20mm coin cells (CR2032 is the most common size) wired in series to provide 6V nominal output, with an on/off switch built into the top for convenient power control. The holder features...

SKU: EC-RPA32311R

A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...

SKU: AF-3287

A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST batte...

SKU: SF-GPS-30975 · MPN: GPS-30975

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...

SKU: AF-3286

A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery...

SKU: AF-5367

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed wi...