All Products

SKU: SF-SEN-18772

An Infrared emitter, or IR emitter, is a source of light energy in the infrared spectrum. This little part is a light emitting diode (LED) that is used in order to transmit infrared signals from a remote control. This simple device operates at 940nm and works well for generic IR systems. This emi...

SKU: AF-4762

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! These Conductive Nylon Squares go great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fa...

SKU: EF-EF10119

This is a long flexible white cable. It is called EL wire or electroluminescent wire. Once being charged with appropriate voltage, it can emit bright whitelight and the wire will not be heated. It is similar to a long thin tube full of fluorecent liquid. In the one end, it is terminated with a JS...

SKU: SF-COM-11155

These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals, the two that you would normally see plus a ground tab for ...

SKU: EC-CRF16500R

This product has been used in building intercom and access control products for many years, it has high stability and strongest anti-interference ability. The ATMEGA8 of this module is a high- performance AVR MCU of AVR family. It’s easy to use and small enough to be embedded into your system. It...

SKU: LB-LS6868

Build a functional RGB colour clock from scratch with this beginner-friendly soldering kit. The finished clock displays time, date, temperature, and day of the week on a 4-digit LED display — with 27 selectable colours or an automatic colour-cycling mode. Powered via USB 5 V, the clock features ...

SKU: DF-FIT0689

This 10 cm FPC flat-flex ribbon cable is designed for use with DFRobot GDI (General Display Interface) displays. The 18-pin reverse-contact cable is durable and resistant to damage even when bent sharply, with insulated pads on the back for reliable contact with the FPC connector. Specifications...

SKU: SF-COM-00535

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.

SKU: SF-COM-08861

Huge 10mm through-hole LEDs. Features: 515-520nm Green 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 16,000-22,000 MCD output Documents: Datasheet LED Tutorial

SKU: LB-LR0335-FG

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant fluorescent green when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, sh...

SKU: AF-1481

This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it's just a gigantic resistor. On the other hand, it's flexible, light, and can be wrapped around a project. Originally designed for portable we...

SKU: DF-FIT0899

This VESA mount is specially designed for LattePanda or other SBC cases. It can be used with VESA compatible display and monitor stand to hide the LattePanda or SBC behind the display, thus greatly reducing wire clutter and saving project space. The product supports common 10×10cm and 7.5×7....

SKU: SF-COM-12645

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: 600-610nm Orange 1.8-2.2VDC Forward Voltage 20mA Forward Current 40 degree viewing angle 100-160 MCD output Documents: Datasheet LED Tutorial

SKU: DF-C-PCB-003

Get your custom PCB designs professionally fabricated with this 2-layer PCB service. You will receive 10 PCBs per order, with a maximum board size of 10cm × 15cm. Quantity is in multiples of 10 — add more to your cart if you need additional boards. Once your order is placed, email your design fi...

SKU: SF-COM-11913

A green inverter connector cable for use with the INV133 electroluminescent inverter, bridging the gap between your inverter and ELastoLite panels. The 4.5-inch cable has bare wire leads that can be ironed directly onto ELastoLite connect patches for a clean, secure connection. ELastoLite is a w...

SKU: PI-COM0613

A clear 5mm infrared LED operating at 940nm wavelength. Ideal for generic IR systems including remote controls, proximity sensors, and touchless object detection. Specifications Wavelength: 940nm (infrared) Forward Voltage: 1.5V DC Max Forward Current: 50mA Package: 5mm clear through-hole ...

SKU: SF-TOL-18374 · MPN: TOL-18374

A panel-mount DC current and voltage meter is a handy addition when you need to keep an eye on a system continuously, rather than grabbing a DMM for quick checks. It is useful for battery-backed projects, power supplies and other DC systems where voltage and current draw matter.This combination m...

SKU: DF-FIT0008-BE

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices for different colors. SPECIFICATIONS 170 tie point breadboard 17 x 5 x 2 points Adhes...

SKU: PI-COM-B005

580 resistors (29 values, 20 pieces of each) go into this great starter pack (or refill!) with a wide range of useful values. The kit contains 20 each of:10Ω22Ω47Ω68Ω100Ω120Ω150Ω180Ω220Ω270Ω330Ω470Ω560Ω680Ω1kΩ1.2kΩ1.5kΩ1.8kΩ2.2kΩ2.7kΩ3.3kΩ4.7kΩ5.6kΩ6.8kΩ8.2kΩ10kΩ22kΩ47kΩ100kΩ Rated for&nb...

SKU: SF-SEN-12784

This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely reflected light intensity or reflected angles to determine range, the VL6180 uses a precise clock to measure the time it takes light to bounce back from a surfa...