All Products

SKU: AF-3136

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Green adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip in...

SKU: AF-3106

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in blue. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall blue 7-segment display with decimal points and a centre colon for clock displays. ...

SKU: AF-4814

The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...

SKU: AF-4537

Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing for Feather M4 enables 8 concurrent DMA NeoPixel strands from a single Feather M4, with up to 1,750 RGB pixels per strand (14,000 total) — all running in the background via hardware DMA on the ATSAMD51's blaz...

SKU: AF-3110

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in yellow. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall yellow 7-segment display with decimal points and a centre colon for clock display...

SKU: AF-4446

The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any Feather board via SPI, plus a...

SKU: AF-3045

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect a FeatherWing on top of your Feather board and let the boar...

SKU: AF-4565

The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading sen...

SKU: AF-3785

This isolated PoE splitter takes a unified Power over Ethernet signal from a single RJ-45 cable and separates it into data (Ethernet) and regulated 5V DC power via a Micro USB plug. It works with any 802.3af-capable router or switch, letting you power non-PoE devices over a standard Ethernet run ...

SKU: AF-3109

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in white. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall white 7-segment display with decimal points and a centre colon for clock displays....

SKU: AF-3108

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in red. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall red 7-segment display with decimal points and a centre colon for clock displays. Th...

SKU: AF-3650

The Adafruit INA219 FeatherWing is a high-side current and voltage sensor that stacks onto any Feather development board. Using the INA219B chip over I2C, it measures both DC current draw and bus voltage with 1% precision — replacing the need for two separate multimeters in your power-monitoring ...

SKU: AF-3232

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 433 MHz — perfect for sensor networks, remote monitoring, and bridging to the Internet via a WiFi or cel...

SKU: AF-4569

The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather board for industrial-quality motion sensing with AHRS orientation capability. The I...

SKU: AF-4264

Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main Feather can focus on your application logic. The ESP32 communicates over ...

SKU: AF-2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...

SKU: AF-3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-2945

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...

SKU: AF-5862 · MPN: ADA5862

The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...

SKU: AF-3651

The Adafruit TFT FeatherWing is a 3.5" colour display with a 480×320 resolution, bright 6-LED white backlight, and a built-in resistive touchscreen. It plugs directly into any Adafruit Feather board, giving you a high-resolution colour display with touch input and a microSD card slot for image st...