All Products

SKU: AF-2336

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These standoffs can also be screwed into each other allowing stacking multiple H...

SKU: PI-COM2100

Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT/pHAT combo. Contents 2 x 10mm M2.5 F-F standoff 4 x 6mm screw Raspberry Pi and ...

SKU: PR-PIM321

Stack up to 5 HATs or pHATs on a single Raspberry Pi with the pHAT Stack from Pimoroni. This solder-yourself kit lets you mix and match multiple add-on boards for dashboard setups, multi-sensor projects, or any build that needs more than one HAT at a time. The board includes 6 sets of 2×20 pin h...

SKU: PH-106462

The KKSB HAT Case is an aluminium enclosure for the Raspberry Pi 5, designed to accommodate HAT add-on boards including NVMe storage HATs. The sandblasted, black anodised finish provides a professional look while offering heat dissipation, dust protection, and physical shielding. The case featur...

SKU: WS-25726

A 13.3-inch e-Paper display HAT for the Raspberry Pi, featuring a 960×680 resolution black and white panel with over 170° viewing angle. The e-ink technology requires no backlight — it reflects ambient light like printed paper and retains the displayed image even when powered off, consuming energ...

SKU: PR-PIM322

A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once. pHAT Stack is the big brother to the Mini Black HAT Hack3r. It has ...

SKU: WS-21173 · MPN: 21173

A durable ABS enclosure for the Raspberry Pi 4 Model B, designed for DIN rail mounting in industrial and automation environments. The spacious interior accommodates the Pi along with HATs and add-on boards, while a clear top window lets you monitor status LEDs without opening the case. Manufactu...

SKU: AF-2714

An extra-tall 2×20 SMT (surface-mount) female header designed for Raspberry Pi HATs. The increased height provides additional clearance for stacking multiple HATs or accommodating taller components on the Pi, such as displays and breakout boards. Compatible with all 40-pin Raspberry Pi models in...

SKU: AF-2314

The Adafruit Perma-Proto HAT for Pi Mini Kit with EEPROM is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header. It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern, plus a pre-soldered 24C32 I2C EEPROM for self-identifying HAT co...

SKU: MM-RB-BLUE

The ModMyPi Modular Raspberry Pi 2 Case in blue is a fully customisable, two-part ABS plastic enclosure designed for the Raspberry Pi 2 Model B and B+. Its modular design lets you add stackable spacer plates, security covers, and VESA mounts to adapt the case to your project's needs — from a simp...

SKU: AF-4079

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear taller components on the Pi or fit more neatly into cases. The header body is ...

SKU: AF-2310

The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a...

SKU: YH-6000300079

A GPIO expansion board that multiplies a single Raspberry Pi 40-pin GPIO header into three parallel rows. This allows you to stack multiple HATs, breakout boards, or jumper wire connections on the same set of GPIO pins simultaneously. Key Features 1-to-3 GPIO Expansion – Three full 40-pin head...

SKU: WS-27670 · MPN: 27670

The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5 / CM 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi...

SKU: PR-PIM320

A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once. pHAT Stack is the big brother to the Mini Black HAT Hack3r. It h...

SKU: PL-1952

Hexagonal male-female aluminium standoffs designed specifically for the Raspberry Pi. The 11mm spacing is the ideal height for mounting expansion boards with standard-size female headers, and the M2.5 threads fit the Pi's mounting holes perfectly. Key Features Pi-Optimised Spacing – 11mm lengt...

SKU: SF-DEV-17512

The SparkFun Qwiic pHAT Extension for Raspberry Pi 400 provides access to the Pi 400's GPIO header while adding Qwiic I2C connectivity. The board connects via a 2×20 right-angle header and extends out to the edge of the PCB, allowing you to stack HATs right-side up or connect Qwiic-enabled I2C de...

SKU: PI-SM-200R

The SmartiPi is a versatile Raspberry Pi 2 / B+ and camera case with Lego® and GoPro® mount compatibility. Case Features Permanently embedded 2x6 Lego® compatible plates. Included is a 6x10 Lego® compatible plate that can be snapped onto the embedded 2x6 plates. This makes the top flush. Screw t...

SKU: AF-1979

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin part is a...

SKU: PR-PIM536

Now at right angles! Securely attach a HAT (or two mini HATs) to your Raspberry Pi 400, so that they're pointing upwards and correctly oriented.Flat HAT Hacker is an easy way to attach HATs and mini HATs to the back of your Pi 400 so that their alignment matches your Pi 400's keyboard. ...