All Products

SKU: PI-1SHEELD

The 1Sheeld+ is a Bluetooth shield for Arduino that turns your smartphone into over 40 different Arduino shields. Connect your iPhone or Android device via the free 1Sheeld app, and use your phone's sensors, camera, GPS, social media, and more directly from your Arduino sketch. The shield acts a...

SKU: AF-802

The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...

SKU: AF-715

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...

SKU: SF-DEV-14352

The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I2C bus on your Arduino to a series of SparkFun Qwiic connectors and provides the circuitry to convert the 5V giv...

SKU: AF-2024

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...

SKU: SF-DEV-21247

The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, digital cameras, Bluetooth dongles, game controllers, and more. This version up...

SKU: AF-4229

Add a large, vibrant tri-colour eInk display to your Arduino project with this shield. The 2.7" panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power completely disconnected. The shield form factor plugs directly onto Arduino-compatible boards from ...

SKU: SF-DEV-18425

The MyoWare 2.0 Link Shield connects a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller via a 3.5mm TRS cable. Simply snap the Link Shield onto your Muscle Sensor using the built-in snap connectors, connect a TRS-to-TRS cable, and link it to the MyoWare 2.0 Arduino Shield on your develop...

SKU: DF-DFR1107 · MPN: DFR1107

The Arduino GIGA Display Shield is a touchscreen add-on designed for the Arduino GIGA R1 WiFi. Featuring a 3.97" TFT display with 480×800 resolution and 5-point capacitive touch, it makes it easy to deploy graphic interfaces for dashboards, handheld devices, and interactive projects. Beyond the ...

SKU: EC-ACS44240D

A 2.4″ colour TFT LCD touch shield from Elecrow that plugs directly onto an Arduino Uno or Mega. The ILI9341-driven display delivers 240 × 320 resolution with 18-bit colour (262,000 shades), and includes a 4-wire resistive touchscreen, microSD card slot, and reset switch. Key Features 240 × 32...

SKU: TB-XC4392

The Arduino Compatible Long Range LoRa Shield turns your Arduino into a LoRa wireless node capable of transmitting and receiving data over several kilometres — without the need for a GSM network. Built around the Semtech SX1276 transceiver on the 915MHz band (Australian-legal), it's ideal for rem...

SKU: TB-XC4454

This Arduino-compatible LCD shield combines a 16×2 character LCD display with a six-button keypad on a single board. The backlit display and built-in navigation buttons (up, down, left, right, select, and reset) make it easy to create user-friendly menus and interfaces for your Arduino projects. ...

SKU: DF-DFR0502

Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and TB6612FNG dual motor driver. It also has XBee socket, I2C interface and UART po...

SKU: AF-716

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and keypad inputs, leaving your remaining pins free for sensors and other peripherals...

SKU: AF-772

This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the Blue & White 16x2 LCDs we stock in the shop. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another pin to control the backlight for a total of 7 pins. That's al...

SKU: AF-1651

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI fo...

SKU: DF-DFR0258

This RS232 Shield For Arduino is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The RS232 shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 shield headers will facilitate your co...

SKU: DF-DFR0374

The Arduino LCD Keypad Shield V2 includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons. This product ensures consumer's convience especially when comp...

SKU: EC-ARS3421U

A USB Host shield for Arduino that adds USB 2.0 full-speed and low-speed host functionality to your project. Allows your Arduino to communicate with USB devices such as keyboards, mice, game controllers, USB hubs, and more. Communicates via SPI and is compatible with Arduino Uno, Duemilanove, Meg...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...