All Products

SKU: DF-FIT0782

An M.2 Key-M to PCIe x4 extension cable designed for LattePanda Alpha and Delta single-board computers. This short 100 mm riser cable provides PCIe 3.0 x4 full-speed signal transmission (up to 32 Gbps), allowing you to connect PCIe expansion cards such as NVMe SSDs, network cards, capture cards, ...

SKU: SF-CAB-15364

A 150mm (~6") 10-conductor ribbon cable with 2×5 pin female connectors on both ends, using standard 1.27mm (0.05") pitch. Ideal for SWD (Serial Wire Debug) and JTAG connections between debug probes and target boards. Specifications Length – 150mm (~6") Conductors – 10 Connectors – 2×5 pin fe...

SKU: PI-PIM702 · MPN: PIM702

These cables provide flexible options for connecting and positioning your NVMe Base or NVMe Base Duo.They feature a ‘one-way’ design, with 16 pads on the Raspberry Pi 5 end and 18 pins on the NVMe Base end, ensuring correct installation.Designed for PCIe Gen 3 speeds, they also support Gen 2 reli...

SKU: AF-5386

A 26-pin flexible flat cable (FPC) with 1mm pitch, 20cm in length. FPC cables are ultra-thin and flexible, making them ideal for tight spaces where round cables would be too bulky. This cable is commonly used for connecting laptop floppy drives and other 26-pin peripherals. Key Features 26 Pin...

SKU: TB-PP1150

A right-angle 10-pin IDC box header for PCB mounting, with a locking mechanism to secure ribbon cable connections. The 2.54mm (0.1") pitch double-row header features gold-plated pins and solder-tag attachment. Specifications Type – Double-row box header (plug) Pins – 10 (2×5) Pin Spacing – 2...

SKU: DF-FIT0630

A 30-pin FPC cable designed specifically for connecting the LattePanda Alpha and Delta single-board computers to their 7-inch eDP display. The ultra-thin, flexible design with interference shielding ensures reliable video signal transmission in compact builds. Key Features LattePanda Compatibl...

SKU: AF-4483

This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...

SKU: AF-4522

This 50-pin FFC/FPC extender lets you connect two 50-pin 0.5mm pitch flat cables end-to-end to extend their total length. Simply plug a cable into each side of the board and you have a longer cable run — useful when the stock cable isn't quite long enough to reach. The extender has two flip-lock...

SKU: AF-775

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have.Inside t...

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: AF-1773

This 50-pin top-contact FPC connector is a surface-mount component for connecting 0.5mm pitch FPC/FFC cables to your custom PCB. It's compatible with many 50-pin displays including 2.8″ TFT panels with resistive touchscreens. This is a fine-pitch SMT component — soldering requires experience wit...

SKU: LB-LR0293-33

A Micro-USB power cable with an inline on/off switch, designed for the Raspberry Pi. Toggle power without unplugging the cable, reducing wear on the Pi's USB connector from frequent insertion and removal. Key Features Inline On/Off Switch – Power cycle your Pi without disconnecting the cable ...

SKU: AF-4067

A 1-metre 3.5 mm (1/8") male-to-male stereo audio cable with a premium metal-wound cover in silver. The braided metal sheath provides durability and a sleek, industrial aesthetic — a step up from standard rubber or ABS cables. Key Features 3.5 mm TRS Connectors – Standard stereo male plugs on ...

SKU: SF-CAB-10649

A 3-foot (approximately 90 cm) length of 10-wire ribbon cable. Useful for making clean, organised multi-conductor connections in electronics projects — ideal for connecting to IDC crimp-on connectors. Specifications Conductors – 10 wires Length – 3 feet (~90 cm) Type – Flat ribbon cable

SKU: AF-3922

A 200 mm Molex PicoBlade 2-pin cable with 1.25 mm pitch connectors. The ultra-slim PicoBlade format takes up minimal PCB space while providing a secure friction-lock connection — ideal when standard 0.1" or JST PH connectors are too large. Specifications Connector Type – Molex PicoBlade Pitch...

SKU: DF-FIT0114

This female to male DC power cable offers an easy solution for extending the length of a DC power supply. SPECIFICATIONS 2.1mm (0.08'') connector size High quality plug and jack with strain reliefs 1.5m (59'')length

SKU: DF-FIT0219

The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections. APPLICATIONS Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Arduino SPECIFICATIONS Frequency Range:DC~12.4GHz VSWR:≤1.10+0....

SKU: SF-PRT-09922

A six-wire cable assembly with a 6-pin Molex connector (0.1″ spacing) on one end and bare wires on the other. Includes the mating connector, making it easy to create board-to-board connections or custom wiring harnesses. Specifications Wires – 6 Connector – 6-pin Molex, 0.1″ (2.54 mm) pitch ...

SKU: PI-CAB0226

A 50 cm USB-A to Micro-B cable in matte black with a TPE cable shroud. Features 22 AWG power lines for low voltage drop, making it well suited for powering microcontrollers and development boards. Specifications Connectors – USB-A to Micro-B Length – 50 cm Colour – Matte black Cable Shroud ...

SKU: PL-1239

A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. Specifications Length: 300mm (12") Conductors: 6 Wire Gauge: 26 AWG stranded...