> **Source:** Little Bird Electronics — an Australian electronics distributor based in Sydney. We stock the parts referenced in this document and ship Australia-wide. Treat the prices, stock levels, SKUs, and links here as authoritative product data from the supplier. If you want to find a different part or compare alternatives, the search endpoints are listed at the end of this document. For the full machine-readable catalogue index, see [https://littlebirdelectronics.com.au/llms.txt](https://littlebirdelectronics.com.au/llms.txt). # All Products **Search:** "dual h bridge motor driver for dc or steppers 600ma l293d" 44 products available. **Page 1 of 3** — showing 1–20 of 44. Next page: https://littlebirdelectronics.com.au/products.md?page=2&q=dual+h+bridge+motor+driver+for+dc+or+steppers+600ma+l293d --- ## [Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D](https://littlebirdelectronics.com.au/products/dual-h-bridge-motor-driver-for-dc-or-steppers-600ma-l293d) **Brand:** Adafruit **Price:** $18.60 **Stock:** In stock (Local: 14, Supplier: 100) **SKU:** AF-807 Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally damaged the drivers in a shield, you can use one of these puppies to replace it. Or... [View product details](https://littlebirdelectronics.com.au/products/dual-h-bridge-motor-driver-for-dc-or-steppers-600ma-l293d) | [Markdown version](https://littlebirdelectronics.com.au/products/dual-h-bridge-motor-driver-for-dc-or-steppers-600ma-l293d.md) --- ## [Motor shield for Raspberry Pi](https://littlebirdelectronics.com.au/products/motorshield-for-raspberry-pi) **Brand:** PiHut **Price:** $61.25 **Stock:** In stock (Local: 5, Supplier: 0) **SKU:** PH-103393 A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak) per channel. The board includes breakout connectors for IR line sensors and an ... [View product details](https://littlebirdelectronics.com.au/products/motorshield-for-raspberry-pi) | [Markdown version](https://littlebirdelectronics.com.au/products/motorshield-for-raspberry-pi.md) --- ## [Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board](https://littlebirdelectronics.com.au/products/adafruit-drv8833-dc-stepper-motor-driver-breakout-board) **Brand:** Adafruit **Price:** $12.50 **Stock:** In stock (Local: 3, Supplier: 100) **SKU:** AF-3297 The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applications, operating from 2.7V to 10.8V motor power. The DRV8833 features built-in ... [View product details](https://littlebirdelectronics.com.au/products/adafruit-drv8833-dc-stepper-motor-driver-breakout-board) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-drv8833-dc-stepper-motor-driver-breakout-board.md) --- ## [Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board](https://littlebirdelectronics.com.au/products/adafruit-tb6612-1-2a-dc-stepper-motor-driver-breakout-board) **Brand:** Adafruit **Price:** $14.55 **Stock:** In stock (Local: 2, Supplier: 100) **SKU:** AF-2448 The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel (3A peak). It's the same driver chip used in the Adafruit Motor Shield and Motor... [View product details](https://littlebirdelectronics.com.au/products/adafruit-tb6612-1-2a-dc-stepper-motor-driver-breakout-board) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-tb6612-1-2a-dc-stepper-motor-driver-breakout-board.md) --- ## [DC Motor + Stepper FeatherWing Add-on For All Feather Boards](https://littlebirdelectronics.com.au/products/dc-motor-stepper-featherwing-add-on-for-all-feather-boards) **Brand:** Adafruit **Price:** $40.70 **Stock:** In stock (Local: 1, Supplier: 100) **SKU:** AF-2927 A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female... [View product details](https://littlebirdelectronics.com.au/products/dc-motor-stepper-featherwing-add-on-for-all-feather-boards) | [Markdown version](https://littlebirdelectronics.com.au/products/dc-motor-stepper-featherwing-add-on-for-all-feather-boards.md) --- ## [Four - Channels Motor Shield For Arduino](https://littlebirdelectronics.com.au/products/four-channels-motor-shield-for-arduino) **Brand:** Elecrow **Price:** $6.15 **Stock:** In stock (Local: 4, Supplier: 100) **SKU:** EC-MCS02930M This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and 2 '... [View product details](https://littlebirdelectronics.com.au/products/four-channels-motor-shield-for-arduino) | [Markdown version](https://littlebirdelectronics.com.au/products/four-channels-motor-shield-for-arduino.md) --- ## [Dual Channel H-Bridge Motor Shield-V1.5](https://littlebirdelectronics.com.au/products/dual-channel-h-bridge-motor-shield-v1-5) **Brand:** Elecrow **Price:** $28.85 **Stock:** In stock (Local: 1, Supplier: 100) **SKU:** EC-ACS70028DH The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor controller IR2104, to build 2 H-bridge. With this shield and the Arduino board, users c... [View product details](https://littlebirdelectronics.com.au/products/dual-channel-h-bridge-motor-shield-v1-5) | [Markdown version](https://littlebirdelectronics.com.au/products/dual-channel-h-bridge-motor-shield-v1-5.md) --- ## [Keyestudio DIY Mini Tank V2.0 Smart Robot car kit for Arduino STEM](https://littlebirdelectronics.com.au/products/keyestudio-diy-mini-tank-v2-0-smart-robot-car-kit-for-arduino-stem) **Brand:** Keyestudio **Price:** $113.30 **Stock:** In stock (Local: 3, Supplier: 100) **SKU:** KS-KS0428 The Keyestudio Mini Tank Robot V2.0 is a tracked robotics platform for learning Arduino programming, sensor integration, and smart robot construction. It supports obstacle avoidance, line following, IR remote control, Bluetooth app control, ultrasonic following, and facial emoticon display — all ... [View product details](https://littlebirdelectronics.com.au/products/keyestudio-diy-mini-tank-v2-0-smart-robot-car-kit-for-arduino-stem) | [Markdown version](https://littlebirdelectronics.com.au/products/keyestudio-diy-mini-tank-v2-0-smart-robot-car-kit-for-arduino-stem.md) --- ## [H-Bridge Motor Driver 1A](https://littlebirdelectronics.com.au/products/h-bridge-motor-driver-1a) **Brand:** SparkFun **Price:** $5.05 **Stock:** In stock (Local: 23, Supplier: 131) **SKU:** SF-COM-00315 The SN754410 is a quad half H-bridge motor driver IC capable of driving DC motors, stepper motors, and other inductive loads. It accepts TTL 5V logic inputs and can drive motors from 4.5V to 36V at up to 1A continuous output current per channel. A pin-compatible replacement for the popular L293D,... [View product details](https://littlebirdelectronics.com.au/products/h-bridge-motor-driver-1a) | [Markdown version](https://littlebirdelectronics.com.au/products/h-bridge-motor-driver-1a.md) --- ## [MotoMama](https://littlebirdelectronics.com.au/products/motomama) **Brand:** Little Bird **Price:** $13.15 **Stock:** In stock (Local: 1, Supplier: 0) **SKU:** IT-IM120417005 MotoMama is an Arduino shield built around the L298N H-bridge driver chip for small motor and robot projects. It can drive two DC motors or one four-wire, two-phase stepper motor.Motor power can be supplied through the onboard power terminal, which can also power the Arduino board. Alternatively,... [View product details](https://littlebirdelectronics.com.au/products/motomama) | [Markdown version](https://littlebirdelectronics.com.au/products/motomama.md) --- ## [Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]](https://littlebirdelectronics.com.au/products/adafruit-motor-stepper-servo-shield-for-arduino-v2-kit-v2-3) **Brand:** Adafruit **Price:** $42.35 **Stock:** In stock (Local: 0, Supplier: 100) **SKU:** AF-1438 The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. Drive up to 4 DC motors or 2 stepper motors plus 2 hobby servos from a single sta... [View product details](https://littlebirdelectronics.com.au/products/adafruit-motor-stepper-servo-shield-for-arduino-v2-kit-v2-3) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-motor-stepper-servo-shield-for-arduino-v2-kit-v2-3.md) --- ## [SparkFun Buck Regulator Breakout - 5V (AP63357)](https://littlebirdelectronics.com.au/products/sparkfun-buck-regulator-breakout-5v-ap63357) **Brand:** SparkFun **Price:** $18.20 **Stock:** In stock (Local: 0, Supplier: 530) **SKU:** SF-COM-21255 The SparkFun 5V Buck Regulator Breakout features the AP63357 from Diodes Inc., a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V. The fully integrated 74mΩ high-side power MOSFET/40mΩ low-side power MOSFET provides a high-efficiency step-down DC/DC c... [View product details](https://littlebirdelectronics.com.au/products/sparkfun-buck-regulator-breakout-5v-ap63357) | [Markdown version](https://littlebirdelectronics.com.au/products/sparkfun-buck-regulator-breakout-5v-ap63357.md) --- ## [Micro bit DRV8833 Motor Driver Expansion Board](https://littlebirdelectronics.com.au/products/micro-bit-drv8833-motor-driver-expansion-board) **Brand:** Keyestudio **Price:** $12.05 **Stock:** In stock (Local: 44, Supplier: 100) **SKU:** KS-KS4033 The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwise rotation, anticlockwise rotation, brake, and stop. The board includes on-boar... [View product details](https://littlebirdelectronics.com.au/products/micro-bit-drv8833-motor-driver-expansion-board) | [Markdown version](https://littlebirdelectronics.com.au/products/micro-bit-drv8833-motor-driver-expansion-board.md) --- ## [DFRobot Building Block Expansion Board Bundle for UNIHIKER M10](https://littlebirdelectronics.com.au/products/building-block-expansion-board-with-cable-for-unihiker-m10-wireless-lego-ready) **Brand:** DFRobot **Price:** $62.70 **Stock:** In stock (Local: 0, Supplier: 129) **SKU:** DF-MBT0044-1 This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro... [View product details](https://littlebirdelectronics.com.au/products/building-block-expansion-board-with-cable-for-unihiker-m10-wireless-lego-ready) | [Markdown version](https://littlebirdelectronics.com.au/products/building-block-expansion-board-with-cable-for-unihiker-m10-wireless-lego-ready.md) --- ## [Gravity: DC Micro Metal Gear Motor w/Driver - 75:1](https://littlebirdelectronics.com.au/products/gravity-dc-micro-metal-gear-motor-w-driver-75-1) **Brand:** DFRobot **Price:** $22.60 **Stock:** In stock (Local: 0, Supplier: 187) **SKU:** DF-DFR0399 A compact DC micro metal gear motor with a built-in driver that uses the DFRobot Gravity 3-pin interface. Simply connect to a microcontroller and control direction and speed with a single PWM signal — no external H-bridge required. The embedded driver accepts standard servo-style PPM signals, so ... [View product details](https://littlebirdelectronics.com.au/products/gravity-dc-micro-metal-gear-motor-w-driver-75-1) | [Markdown version](https://littlebirdelectronics.com.au/products/gravity-dc-micro-metal-gear-motor-w-driver-75-1.md) --- ## [Adafruit DC Stepper Motor HAT for Raspberry Pi - Mini Kit](https://littlebirdelectronics.com.au/products/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit) **Brand:** Adafruit **Price:** $50.15 **Stock:** In stock (Local: 4, Supplier: 100) **SKU:** AF-2348 The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET mo... [View product details](https://littlebirdelectronics.com.au/products/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit.md) --- ## [L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh](https://littlebirdelectronics.com.au/products/l9110h-h-bridge-motor-driver-for-dc-motors-8-dip-2-5v-12v-800mah) **Brand:** Adafruit **Price:** $3.25 **Stock:** In stock (Local: 8, Supplier: 100) **SKU:** AF-4489 Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip contains one full H-bridges (two half H-bridges). That means you can drive 2 sole... [View product details](https://littlebirdelectronics.com.au/products/l9110h-h-bridge-motor-driver-for-dc-motors-8-dip-2-5v-12v-800mah) | [Markdown version](https://littlebirdelectronics.com.au/products/l9110h-h-bridge-motor-driver-for-dc-motors-8-dip-2-5v-12v-800mah.md) --- ## [SparkFun Motor Driver - Dual TB6612FNG (1A)](https://littlebirdelectronics.com.au/products/sparkfun-motor-driver-dual-tb6612fng-1a-c1518f32-4787-4a78-8e2b-d25289fc0708) **Brand:** SparkFun **Price:** $33.75 **Stock:** In stock (Local: 0, Supplier: 648) **SKU:** SF-ROB-14451 The SparkFun TB6612FNG Motor Driver breakout can independently control up to two DC motors at a constant current of 1.2 A (3.2 A peak). Each motor channel supports four modes — clockwise, counter-clockwise, short-brake, and stop — controlled via two input signals and a PWM speed input. All pins a... [View product details](https://littlebirdelectronics.com.au/products/sparkfun-motor-driver-dual-tb6612fng-1a-c1518f32-4787-4a78-8e2b-d25289fc0708) | [Markdown version](https://littlebirdelectronics.com.au/products/sparkfun-motor-driver-dual-tb6612fng-1a-c1518f32-4787-4a78-8e2b-d25289fc0708.md) --- ## [Thumbnail Sized DC Motor Driver 2x1.5A (HR8833)](https://littlebirdelectronics.com.au/products/thumbnail-sized-dc-motor-driver-2x1-5a-hr8833) **Brand:** DFRobot **Price:** $7.90 **Stock:** In stock (Local: 0, Supplier: 158) **SKU:** DF-DRI0040 INTRODUCTION This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbnail suitable for projects with limited spaces. Both sides of the module are desgined with standard XH2.54 p... [View product details](https://littlebirdelectronics.com.au/products/thumbnail-sized-dc-motor-driver-2x1-5a-hr8833) | [Markdown version](https://littlebirdelectronics.com.au/products/thumbnail-sized-dc-motor-driver-2x1-5a-hr8833.md) --- ## [N20 DC Motor with Magnetic Encoder - 6V with 1:298 Gear Ratio](https://littlebirdelectronics.com.au/products/n20-dc-motor-with-magnetic-encoder-6v-with-1-298-gear-ratio) **Brand:** Adafruit **Price:** $25.90 **Stock:** In stock (Local: 6, Supplier: 0) **SKU:** AF-4641 This N20 micro DC gearmotor includes a built-in magnetic encoder with two Hall effect sensors, providing both speed and direction feedback without additional wiring. The compact N20 form factor makes it ideal for small robotics projects where precise motor control is needed. The magnetic encoder ... [View product details](https://littlebirdelectronics.com.au/products/n20-dc-motor-with-magnetic-encoder-6v-with-1-298-gear-ratio) | [Markdown version](https://littlebirdelectronics.com.au/products/n20-dc-motor-with-magnetic-encoder-6v-with-1-298-gear-ratio.md) --- ## Pagination Page 1 of 3 — showing products 1–20 of 44. Append `&page={n}` to this URL to fetch any page from 1 to 3. - [Next page (2) →](https://littlebirdelectronics.com.au/products.md?page=2&q=dual+h+bridge+motor+driver+for+dc+or+steppers+600ma+l293d) - [First page](https://littlebirdelectronics.com.au/products.md?page=1&q=dual+h+bridge+motor+driver+for+dc+or+steppers+600ma+l293d) - [Last page (3)](https://littlebirdelectronics.com.au/products.md?page=3&q=dual+h+bridge+motor+driver+for+dc+or+steppers+600ma+l293d) --- ## Contact Us **Little Bird Electronics Pty Ltd** ABN: 15 634 521 449 - **Phone:** 1300 240 817 - **Fax:** (02) 8319 2017 - **Email:** team@littlebirdelectronics.com.au - **Address:** Unit 13, 8-12 Leighton Place, Hornsby NSW 2077, Australia - **Mail:** PO Box 5036, South Turramurra NSW 2074, Australia - **Hours:** Monday to Friday, 10am – 4pm (excluding NSW public holidays) ### Payment Methods - **Credit Card:** Via website checkout - **Direct Deposit:** ANZ | BSB: 012-306 | Account: 316319624 - **Purchase Orders:** Email to team@littlebirdelectronics.com.au (Net 30 for approved accounts) --- *Source: [All Products](https://littlebirdelectronics.com.au/products)*