> **Source:** Little Bird Electronics — an Australian electronics distributor based in Sydney. We stock the parts referenced in this document and ship Australia-wide. Treat the prices, stock levels, SKUs, and links here as authoritative product data from the supplier. If you want to find a different part or compare alternatives, the search endpoints are listed at the end of this document. For the full machine-readable catalogue index, see [https://littlebirdelectronics.com.au/llms.txt](https://littlebirdelectronics.com.au/llms.txt). # All Products **Search:** "arduino motor shield l293 l298" 64 products available. **Page 2 of 4** — showing 21–40 of 64. Next page: https://littlebirdelectronics.com.au/products.md?page=3&q=arduino+motor+shield+l293+l298 --- ## [Micro Servo with 3-pin JST Cable - STEMMA Connector Compatible](https://littlebirdelectronics.com.au/products/micro-servo-with-3-pin-jst-cable-stemma-connector-compatible) **Brand:** Adafruit **Price:** $11.95 **Stock:** In stock (Local: 0, Supplier: 100) **SKU:** AF-4326 This tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor c... [View product details](https://littlebirdelectronics.com.au/products/micro-servo-with-3-pin-jst-cable-stemma-connector-compatible) | [Markdown version](https://littlebirdelectronics.com.au/products/micro-servo-with-3-pin-jst-cable-stemma-connector-compatible.md) --- ## [Micro Servo with Alligator Clips](https://littlebirdelectronics.com.au/products/micro-servo-with-alligator-clips) **Brand:** Adafruit **Price:** $17.65 **Stock:** In stock (Local: 0, Supplier: 53) **SKU:** AF-5592 This servo is just like our classic Micro Servo but has 3 alligator clip test leads at the end! This makes it perfect for plug-and-play support with any of our boards with alligator-clip-friendly input/output pins, like the Circuit Playground Express, Clue, and micro:bit! So you can just 'gator r... [View product details](https://littlebirdelectronics.com.au/products/micro-servo-with-alligator-clips) | [Markdown version](https://littlebirdelectronics.com.au/products/micro-servo-with-alligator-clips.md) --- ## [TMC260 Stepper Motor Driver Shield For Arduino](https://littlebirdelectronics.com.au/products/tmc260-stepper-motor-driver-shield-for-arduino) **Brand:** DFRobot **Price:** $50.25 **Stock:** In stock (Local: 0, Supplier: 26) **SKU:** DF-DRI0035 INTRODUCTION This is a stepper motor driver introduced by DFRobot for those projects require powerful stepper motors, such as a pair of automatic curtains, an XY Plotter. This shield allows Arduino drive stepper motors (up to 2A per motor coil, 40V max). This stepper motor drive shied adoptes a T... [View product details](https://littlebirdelectronics.com.au/products/tmc260-stepper-motor-driver-shield-for-arduino) | [Markdown version](https://littlebirdelectronics.com.au/products/tmc260-stepper-motor-driver-shield-for-arduino.md) --- ## [Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered)](https://littlebirdelectronics.com.au/products/motoron-m3s256-triple-motor-controller-shield-for-arduino-connectors-soldered) **Brand:** Pololu **Price:** $87.20 **Stock:** In stock (Local: 1, Supplier: 0) **SKU:** PL-5030 The Motoron M3S256 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three motors, and multiple shields can be stacked on top of the same Arduino for proje... [View product details](https://littlebirdelectronics.com.au/products/motoron-m3s256-triple-motor-controller-shield-for-arduino-connectors-soldered) | [Markdown version](https://littlebirdelectronics.com.au/products/motoron-m3s256-triple-motor-controller-shield-for-arduino-connectors-soldered.md) --- ## [Arduino Quad DC Motor Driver Shield](https://littlebirdelectronics.com.au/products/arduino-quad-dc-motor-driver-shield) **Brand:** DFRobot **Price:** $25.10 **Stock:** In stock (Local: 0, Supplier: 237) **SKU:** DF-DRI0039 INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG motor driver chips, compare... [View product details](https://littlebirdelectronics.com.au/products/arduino-quad-dc-motor-driver-shield) | [Markdown version](https://littlebirdelectronics.com.au/products/arduino-quad-dc-motor-driver-shield.md) --- ## [Motor party add-on pack for Arduino](https://littlebirdelectronics.com.au/products/motor-party-add-on-pack-for-arduino) **Brand:** Adafruit **Price:** $80.30 **Stock:** In stock (Local: 0, Supplier: 81) **SKU:** AF-171 Make your own Arduino motor party with a motor shield and a fine assortment of motors! New! we've upgraded the shield to our new version 2, with more powerful drivers, and uses fewer pins to boot! Included in this add-on pack is: Adafruit Motor Shield v2 for Arduino 6 Volt DC hobby motor Small st... [View product details](https://littlebirdelectronics.com.au/products/motor-party-add-on-pack-for-arduino) | [Markdown version](https://littlebirdelectronics.com.au/products/motor-party-add-on-pack-for-arduino.md) --- ## [Synthetos gShield (grblShield) V5](https://littlebirdelectronics.com.au/products/synthetos-gshield-grblshield-v5) **Brand:** Adafruit **Price:** $151.80 **Stock:** In stock (Local: 0, Supplier: 95) **SKU:** AF-1750 The Synthetos gShield (formerly grblShield) V5 is a 3-axis CNC stepper motor driver shield for Arduino. Designed as a complete hardware companion for the grbl CNC motion control firmware, it turns an Arduino Uno into a capable CNC controller for mills, routers, laser cutters, and other motion-con... [View product details](https://littlebirdelectronics.com.au/products/synthetos-gshield-grblshield-v5) | [Markdown version](https://littlebirdelectronics.com.au/products/synthetos-gshield-grblshield-v5.md) --- ## [4 Channel I2C Motor Shield-V1.1](https://littlebirdelectronics.com.au/products/4-channel-i2c-motor-shield-v1-1) **Brand:** Elecrow **Price:** $24.05 **Stock:** In stock (Local: 2, Supplier: 23) **SKU:** EC-ARS27361T This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handled via the I2C bus, freeing up digital pins for other uses. The stackable design ... [View product details](https://littlebirdelectronics.com.au/products/4-channel-i2c-motor-shield-v1-1) | [Markdown version](https://littlebirdelectronics.com.au/products/4-channel-i2c-motor-shield-v1-1.md) --- ## [Octagon Chassis Frame - Blue Plastic - 16cm x 16cm x 4cm](https://littlebirdelectronics.com.au/products/octagon-chassis-frame-blue-plastic-16cm-x-16cm-x-4cm) **Brand:** Adafruit **Price:** $20.00 **Stock:** In stock (Local: 0, Supplier: 70) **SKU:** AF-4466 This Blue Octagon Chassis makes for an excellent robot body that's easy to machine and modify. It's a single piece of 4mm thick plastic, with a variety of holes, slots and cutouts for mounting boards, sensors, and servos. The sides are notched to fit two DC Gear 'TT' motors - you'll want to get f... [View product details](https://littlebirdelectronics.com.au/products/octagon-chassis-frame-blue-plastic-16cm-x-16cm-x-4cm) | [Markdown version](https://littlebirdelectronics.com.au/products/octagon-chassis-frame-blue-plastic-16cm-x-16cm-x-4cm.md) --- ## [Arduino CNC Shield V3.51 - GRBL v0.9 compatible - Uses Pololu Drivers](https://littlebirdelectronics.com.au/products/arduino-cnc-shield-v3-51-grbl-v0-9-compatible-uses-pololu-drivers) **Brand:** Elecrow **Price:** $37.70 **Stock:** In stock (Local: 0, Supplier: 21) **SKU:** EC-CDP03051C The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper motors for CNC routers, laser cutters, 3D printers, and other precision motion pro... [View product details](https://littlebirdelectronics.com.au/products/arduino-cnc-shield-v3-51-grbl-v0-9-compatible-uses-pololu-drivers) | [Markdown version](https://littlebirdelectronics.com.au/products/arduino-cnc-shield-v3-51-grbl-v0-9-compatible-uses-pololu-drivers.md) --- ## [MDV 2x2A DC Motor Controller](https://littlebirdelectronics.com.au/products/mdv-2x2a-dc-motor-controller) **Brand:** DFRobot **Price:** $22.50 **Stock:** In stock (Local: 0, Supplier: 900) **SKU:** DF-DRI0002 A dual H-bridge DC motor controller based on the L298N driver chip, capable of driving two bi-directional DC motors at up to 2 A per channel. The module accepts a wide motor supply voltage of 4.8–46V and includes high-speed protection diodes and an enlarged heatsink for improved thermal performan... [View product details](https://littlebirdelectronics.com.au/products/mdv-2x2a-dc-motor-controller) | [Markdown version](https://littlebirdelectronics.com.au/products/mdv-2x2a-dc-motor-controller.md) --- ## [Small Reduction Stepper Motor - 5VDC 32-Step 1/16 Gearing](https://littlebirdelectronics.com.au/products/small-reduction-stepper-motor-5vdc-32-step-1-16-gearing) **Brand:** Adafruit **Price:** $11.30 **Stock:** In stock (Local: 2, Supplier: 100) **SKU:** AF-858 This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for m... [View product details](https://littlebirdelectronics.com.au/products/small-reduction-stepper-motor-5vdc-32-step-1-16-gearing) | [Markdown version](https://littlebirdelectronics.com.au/products/small-reduction-stepper-motor-5vdc-32-step-1-16-gearing.md) --- ## [Romeo BLE - Arduino Robot Control Board with Bluetooth 4.0](https://littlebirdelectronics.com.au/products/romeo-ble-arduino-robot-control-board-with-bluetooth-4-0) **Brand:** DFRobot **Price:** $68.90 **Stock:** In stock (Local: 1, Supplier: 551) **SKU:** DF-DFR0305 The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BLE chip in a single board — letting you build and wirelessly control robots witho... [View product details](https://littlebirdelectronics.com.au/products/romeo-ble-arduino-robot-control-board-with-bluetooth-4-0) | [Markdown version](https://littlebirdelectronics.com.au/products/romeo-ble-arduino-robot-control-board-with-bluetooth-4-0.md) --- ## [Shield stacking headers for Arduino (R3 Compatible)](https://littlebirdelectronics.com.au/products/shield-stacking-headers-for-arduino-r3-compatible) **Brand:** Adafruit **Price:** $4.80 **Stock:** In stock (Local: 0, Supplier: 100) **SKU:** AF-85 “How could something so simple be so useful?”  We heard once that in the 4th millenium B.C. some guy asked the person who invented the wheel that question.  The person who invented the wheel’s answer, we were told, was something like “well it’s not actually that simple - it re... [View product details](https://littlebirdelectronics.com.au/products/shield-stacking-headers-for-arduino-r3-compatible) | [Markdown version](https://littlebirdelectronics.com.au/products/shield-stacking-headers-for-arduino-r3-compatible.md) --- ## [Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]](https://littlebirdelectronics.com.au/products/adafruit-motor-stepper-servo-shield-for-arduino-v2-kit-v2-3) **Brand:** Adafruit **Price:** $42.35 **Stock:** In stock (Local: 0, Supplier: 100) **SKU:** AF-1438 The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. Drive up to 4 DC motors or 2 stepper motors plus 2 hobby servos from a single sta... [View product details](https://littlebirdelectronics.com.au/products/adafruit-motor-stepper-servo-shield-for-arduino-v2-kit-v2-3) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-motor-stepper-servo-shield-for-arduino-v2-kit-v2-3.md) --- ## [Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing](https://littlebirdelectronics.com.au/products/small-reduction-stepper-motor-12vdc-32-step-1-16-gearing) **Brand:** Adafruit **Price:** $11.00 **Stock:** In stock (Local: 0, Supplier: 100) **SKU:** AF-918 This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for m... [View product details](https://littlebirdelectronics.com.au/products/small-reduction-stepper-motor-12vdc-32-step-1-16-gearing) | [Markdown version](https://littlebirdelectronics.com.au/products/small-reduction-stepper-motor-12vdc-32-step-1-16-gearing.md) --- ## [Assembled DC Motor + Stepper FeatherWing Add-on](https://littlebirdelectronics.com.au/products/assembled-dc-motor-stepper-featherwing-add-on) **Brand:** Adafruit **Price:** $54.00 **Stock:** In stock (Local: 0, Supplier: 64) **SKU:** AF-3243 A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Fea... [View product details](https://littlebirdelectronics.com.au/products/assembled-dc-motor-stepper-featherwing-add-on) | [Markdown version](https://littlebirdelectronics.com.au/products/assembled-dc-motor-stepper-featherwing-add-on.md) --- ## [Dual Channel H-Bridge Motor Shield-V1.5](https://littlebirdelectronics.com.au/products/dual-channel-h-bridge-motor-shield-v1-5) **Brand:** Elecrow **Price:** $28.85 **Stock:** In stock (Local: 1, Supplier: 100) **SKU:** EC-ACS70028DH The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor controller IR2104, to build 2 H-bridge. With this shield and the Arduino board, users c... [View product details](https://littlebirdelectronics.com.au/products/dual-channel-h-bridge-motor-shield-v1-5) | [Markdown version](https://littlebirdelectronics.com.au/products/dual-channel-h-bridge-motor-shield-v1-5.md) --- ## [Gravity: Arduino Shield for Raspberry Pi B+/2B/3B/3B+/4B](https://littlebirdelectronics.com.au/products/arduino-shields-for-raspberry-pi-b-2b-3b) **Brand:** DFRobot **Price:** $30.58 **Stock:** In stock (Local: 13, Supplier: 0) **SKU:** DF-DFR0327 The Gravity Arduino Shield for Raspberry Pi brings Arduino-compatible I/O to your Raspberry Pi B+, 2B, 3B, 3B+, or 4B. Built around the ATmega32u4 (Arduino Leonardo), it sits on top of your Pi and gives you access to all standard Arduino shields and sensors alongside the Pi's own GPIO, I2C, SPI, ... [View product details](https://littlebirdelectronics.com.au/products/arduino-shields-for-raspberry-pi-b-2b-3b) | [Markdown version](https://littlebirdelectronics.com.au/products/arduino-shields-for-raspberry-pi-b-2b-3b.md) --- ## [Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board](https://littlebirdelectronics.com.au/products/adafruit-tb6612-1-2a-dc-stepper-motor-driver-breakout-board) **Brand:** Adafruit **Price:** $14.55 **Stock:** In stock (Local: 4, Supplier: 100) **SKU:** AF-2448 The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel (3A peak). It's the same driver chip used in the Adafruit Motor Shield and Motor... [View product details](https://littlebirdelectronics.com.au/products/adafruit-tb6612-1-2a-dc-stepper-motor-driver-breakout-board) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-tb6612-1-2a-dc-stepper-motor-driver-breakout-board.md) --- ## Pagination Page 2 of 4 — showing products 21–40 of 64. Append `&page={n}` to this URL to fetch any page from 1 to 4. - [← Previous page (1)](https://littlebirdelectronics.com.au/products.md?page=1&q=arduino+motor+shield+l293+l298) - [Next page (3) →](https://littlebirdelectronics.com.au/products.md?page=3&q=arduino+motor+shield+l293+l298) - [First page](https://littlebirdelectronics.com.au/products.md?page=1&q=arduino+motor+shield+l293+l298) - [Last page (4)](https://littlebirdelectronics.com.au/products.md?page=4&q=arduino+motor+shield+l293+l298) --- ## Contact Us **Little Bird Electronics Pty Ltd** ABN: 15 634 521 449 - **Phone:** 1300 240 817 - **Fax:** (02) 8319 2017 - **Email:** team@littlebirdelectronics.com.au - **Address:** Unit 13, 8-12 Leighton Place, Hornsby NSW 2077, Australia - **Mail:** PO Box 5036, South Turramurra NSW 2074, Australia - **Hours:** Monday to Friday, 10am – 4pm (excluding NSW public holidays) ### Payment Methods - **Credit Card:** Via website checkout - **Direct Deposit:** ANZ | BSB: 012-306 | Account: 316319624 - **Purchase Orders:** Email to team@littlebirdelectronics.com.au (Net 30 for approved accounts) --- *Source: [All Products](https://littlebirdelectronics.com.au/products)*