> **Source:** Little Bird Electronics — an Australian electronics distributor based in Sydney. We stock the parts referenced in this document and ship Australia-wide. Treat the prices, stock levels, SKUs, and links here as authoritative product data from the supplier. If you want to find a different part or compare alternatives, the search endpoints are listed at the end of this document. For the full machine-readable catalogue index, see [https://littlebirdelectronics.com.au/llms.txt](https://littlebirdelectronics.com.au/llms.txt). # All Products **Search:** "adafruit pro trinket 5v 16mhz" 27 products available. **Page 1 of 2** — showing 1–20 of 27. Next page: https://littlebirdelectronics.com.au/products.md?hide_unavailable=0&page=2&q=adafruit+pro+trinket+5v+16mhz --- ## [Adafruit Pro Trinket - 5V](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-5v) **Brand:** Adafruit **Price:** $20.80 **Stock:** In stock (Local: 7, Supplier: 100) **SKU:** AF-2000 Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 5V is a compact ATmega328P-based microc... [View product details](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-5v) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-5v.md) --- ## [Arduino Pro Mini 328 - 5V/16 MHz](https://littlebirdelectronics.com.au/products/arduino-pro-mini-328-5v-16-mhz) **Brand:** Adafruit **Price:** $30.00 **Stock:** In stock (Local: 4, Supplier: 0) **SKU:** AF-2378 The Arduino Pro Mini is SparkFun's minimal design approach to Arduino.  It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board.  There are no connectors attached - allowing you to add whatever connectors or wire you want without too much trouble.... [View product details](https://littlebirdelectronics.com.au/products/arduino-pro-mini-328-5v-16-mhz) | [Markdown version](https://littlebirdelectronics.com.au/products/arduino-pro-mini-328-5v-16-mhz.md) --- ## [Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-liion-lipoly-backpack-add-on) **Brand:** Adafruit **Price:** $10.55 **Stock:** In stock (Local: 0, Supplier: 100) **SKU:** AF-2124 The Adafruit Pro Trinket LiIon/LiPoly Backpack is a tiny add-on board that sits on top of your Pro Trinket or ItsyBitsy, adding rechargeable LiPo battery support with automatic charging and power switching. When USB is connected, the battery charges automatically. Unplug USB and it seamlessly swi... [View product details](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-liion-lipoly-backpack-add-on) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-liion-lipoly-backpack-add-on.md) --- ## [Adafruit Pro Trinket - 3V](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-3v) **Brand:** Adafruit **Price:** $20.00 **Stock:** In stock (Local: 4, Supplier: 0) **SKU:** AF-2010 Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 3V is a compact ATmega328P-based microc... [View product details](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-3v) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-pro-trinket-3v.md) --- ## [Adafruit KB2040 - RP2040 Kee Boar Driver](https://littlebirdelectronics.com.au/products/adafruit-kb2040-rp2040-kee-boar-driver) **Brand:** Adafruit **Price:** $19.45 **Stock:** In stock (Local: 5, Supplier: 100) **SKU:** AF-5302 The Adafruit KB2040 is an RP2040-powered board designed specifically for mechanical keyboard builds, in the Arduino Pro Micro form factor. With castellated pads, USB-C, 8 MB of Flash, and a STEMMA QT / Qwiic connector, it's a drop-in replacement for Pro Micro boards with significantly more power ... [View product details](https://littlebirdelectronics.com.au/products/adafruit-kb2040-rp2040-kee-boar-driver) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-kb2040-rp2040-kee-boar-driver.md) --- ## [Cytron MOTION 2350 Pro RP2350 Robotics Controller](https://littlebirdelectronics.com.au/products/cytron-motion-2350-pro-rp2350-robotics-controller) **Brand:** Adafruit **Price:** $76.85 **Stock:** In stock (Local: 0, Supplier: 13) **SKU:** AF-6080 Built around Raspberry Pi’s RP2350 processor, this Cytron robotics controller is made for beginner and intermediate builders who want to create more advanced robots while spending less time on the supporting electronics.The board integrates a 4-channel brushed DC motor driver, servo outputs, GPIO... [View product details](https://littlebirdelectronics.com.au/products/cytron-motion-2350-pro-rp2350-robotics-controller) | [Markdown version](https://littlebirdelectronics.com.au/products/cytron-motion-2350-pro-rp2350-robotics-controller.md) --- ## [FTDI Serial TTL-232 USB Type C Cable - 5V Power and Logic](https://littlebirdelectronics.com.au/products/ftdi-serial-ttl-232-usb-type-c-cable-5v-power-and-logic) **Brand:** Adafruit **Price:** $40.10 **Stock:** In stock (Local: 1, Supplier: 100) **SKU:** AF-4364 Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an essential part of any electrical engineer's toolkit.This is a USB C to TTL seri... [View product details](https://littlebirdelectronics.com.au/products/ftdi-serial-ttl-232-usb-type-c-cable-5v-power-and-logic) | [Markdown version](https://littlebirdelectronics.com.au/products/ftdi-serial-ttl-232-usb-type-c-cable-5v-power-and-logic.md) --- ## [Small Black T-Bar Hall Effect Fader - 5V](https://littlebirdelectronics.com.au/products/small-black-t-bar-hall-effect-fader-5v) **Brand:** Adafruit **Price:** $249.40 **Stock:** In stock (Local: 0, Supplier: 100) **SKU:** AF-5460 You might recognize this interesting new component from behind-the-scenes studio clips of audio recording equipment or even music videos. A fader is a control device for fading or changing the sound volume, light intensity, or simply the gain on an audio or video signal.Here is a small, black han... [View product details](https://littlebirdelectronics.com.au/products/small-black-t-bar-hall-effect-fader-5v) | [Markdown version](https://littlebirdelectronics.com.au/products/small-black-t-bar-hall-effect-fader-5v.md) --- ## [FTDI Serial TTL-232 USB Type C Cable](https://littlebirdelectronics.com.au/products/ftdi-serial-ttl-232-usb-type-c-cable) **Brand:** Adafruit **Price:** $43.80 **Stock:** In stock (Local: 2, Supplier: 100) **SKU:** AF-4331 Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an essential part of any electrical engineer's toolkit.This is a USB C to TTL seri... [View product details](https://littlebirdelectronics.com.au/products/ftdi-serial-ttl-232-usb-type-c-cable) | [Markdown version](https://littlebirdelectronics.com.au/products/ftdi-serial-ttl-232-usb-type-c-cable.md) --- ## [ProS3 - ESP32-S3 Development Board by Unexpected Maker](https://littlebirdelectronics.com.au/products/pros3-esp32-s3-development-board-by-unexpected-maker) **Brand:** Adafruit **Price:** $56.50 **Stock:** In stock (Local: 3, Supplier: 0) **SKU:** AF-5401 Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board The ProS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2 bootloader, so you can easily update your ProS3 with the latest CircuitPython firmware, whenever you desire. Just plug you... [View product details](https://littlebirdelectronics.com.au/products/pros3-esp32-s3-development-board-by-unexpected-maker) | [Markdown version](https://littlebirdelectronics.com.au/products/pros3-esp32-s3-development-board-by-unexpected-maker.md) --- ## [Adafruit Feather nRF52 Pro with myNewt Bootloader](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52-pro-with-mynewt-bootloader) **Brand:** Adafruit **Price:** $55.25 **Stock:** In stock (Local: 0, Supplier: 100) **SKU:** AF-3574 The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a serial bootloader for command-line firmware flashing, and an on-board SWD debug... [View product details](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52-pro-with-mynewt-bootloader) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52-pro-with-mynewt-bootloader.md) --- ## [Adafruit Feather nRF52 Bluefruit LE [nRF52832]](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52-bluefruit-le-nrf52832) **Brand:** Adafruit **Price:** $52.00 **Stock:** In stock (Local: 1, Supplier: 100) **SKU:** AF-3406 The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your application code and handles BLE directly — resulting in lower power consumption, low... [View product details](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52-bluefruit-le-nrf52832) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52-bluefruit-le-nrf52832.md) --- ## [Piunora Lite Carrier for Raspberry Pi 4 Module by Diodes Delight](https://littlebirdelectronics.com.au/products/piunora-lite-carrier-for-raspberry-pi-4-module-by-diodes-delight) **Brand:** Adafruit **Price:** $100.35 **Stock:** Out of stock (Local: 0, Supplier: 0) **SKU:** AF-5403 Piunora by Diode Delights is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that’s well suited to space-constrained applications.As a carrier board for the Raspberry Pi Compute Module 4 (CM4), Piunor... [View product details](https://littlebirdelectronics.com.au/products/piunora-lite-carrier-for-raspberry-pi-4-module-by-diodes-delight) | [Markdown version](https://littlebirdelectronics.com.au/products/piunora-lite-carrier-for-raspberry-pi-4-module-by-diodes-delight.md) --- ## [SmartiPi Touch Pro 3 Case for Raspberry Pi Touch Display 2 - Small](https://littlebirdelectronics.com.au/products/smartipi-touch-pro-3-for-raspberry-pi-touch-display-2-small) **Brand:** Adafruit **Price:** $98.30 **Stock:** In stock (Local: 0, Supplier: 50) **SKU:** AF-6360 This SmartiPi Touch Pro 3 enclosure is designed for the Raspberry Pi Touch Display 2, giving your touchscreen project a tidy, mountable case with room inside for extra hardware. It is compatible with Raspberry Pi 3, 4 and 5 boards.This version includes the Small 25mm deep cover. SmartiPi also off... [View product details](https://littlebirdelectronics.com.au/products/smartipi-touch-pro-3-for-raspberry-pi-touch-display-2-small) | [Markdown version](https://littlebirdelectronics.com.au/products/smartipi-touch-pro-3-for-raspberry-pi-touch-display-2-small.md) --- ## [Adafruit Feather nRF52840 Express](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52840-express) **Brand:** Adafruit **Price:** $53.55 **Stock:** Out of stock (Local: 0, Supplier: 0) **SKU:** AF-4062 The Feather nRF52840 Express upgrades the nRF52 Bluefruit with the Nordic nRF52840 — featuring 1 MB flash, 256 KB SRAM, native USB, and Bluetooth Low Energy in a single chip. Native USB means no separate serial converter is needed; the chip handles CDC serial, and can also act as a HID keyboard, ... [View product details](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52840-express) | [Markdown version](https://littlebirdelectronics.com.au/products/adafruit-feather-nrf52840-express.md) --- ## [Explorer HAT Pro](https://littlebirdelectronics.com.au/products/explorer-hat-pro-a0480293-49db-489d-988c-152f5b2ebecd) **Brand:** Little Bird **Price:** $41.35 **Stock:** Out of stock (Local: 0, Supplier: 0) **SKU:** PR-PIM175 The Explorer HAT Pro is a feature-packed add-on board for Raspberry Pi that brings together digital I/O, analog inputs, capacitive touch, motor drivers, LEDs, and a mini breadboard — all on a single HAT. It's ideal for robotics, games, science experiments, and learning electronics with the Pi. Ke... [View product details](https://littlebirdelectronics.com.au/products/explorer-hat-pro-a0480293-49db-489d-988c-152f5b2ebecd) | [Markdown version](https://littlebirdelectronics.com.au/products/explorer-hat-pro-a0480293-49db-489d-988c-152f5b2ebecd.md) --- ## [Smarti Pi Touch Pro for Raspberry Pi and Official 7 Display](https://littlebirdelectronics.com.au/products/smarti-pi-touch-pro-for-raspberry-pi-and-official-7-display) **Brand:** Adafruit **Price:** $87.80 **Stock:** In stock (Local: 0, Supplier: 94) **SKU:** AF-4951 Here is an updated, excellently designed stand that provides a sleek and sturdy look for the 7" Touchscreen Display and Raspberry Pi. Say hello to the improved SmartiPi Touch Pro! The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2, 3, and... [View product details](https://littlebirdelectronics.com.au/products/smarti-pi-touch-pro-for-raspberry-pi-and-official-7-display) | [Markdown version](https://littlebirdelectronics.com.au/products/smarti-pi-touch-pro-for-raspberry-pi-and-official-7-display.md) --- ## [Raspberry Pi 4 Pro Mounting Plate for HQ Camera](https://littlebirdelectronics.com.au/products/raspberry-pi-4-pro-mounting-plate-for-hq-camera) **Brand:** Adafruit **Price:** $17.45 **Stock:** In stock (Local: 2, Supplier: 0) **SKU:** AF-5026 This mounting plate kit is an affordable, simple solution to mounting your Raspberry Pi 4 or Model 3 B+ to your Raspberry Pi HQ Camera.  Easy to assemble, the plate attaches to your HQ Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are incl... [View product details](https://littlebirdelectronics.com.au/products/raspberry-pi-4-pro-mounting-plate-for-hq-camera) | [Markdown version](https://littlebirdelectronics.com.au/products/raspberry-pi-4-pro-mounting-plate-for-hq-camera.md) --- ## [Universal Crimping Pliers - 1.6 to 2.5mm Size Contacts [PA-21]](https://littlebirdelectronics.com.au/products/universal-crimping-pliers-1-6-to-2-5mm-size-contacts-pa-21) **Brand:** Adafruit **Price:** $130.60 **Stock:** Out of stock (Local: 0, Supplier: 0) **SKU:** AF-349 Make cables and wiring harnesses with ease using the best crimping pliers we've used. These precision machined crimpers will turn you into a pro, no more painful struggles with pliers and generic crimpers that smoosh your contacts so they wont fit properly. This model does a wide range of the mos... [View product details](https://littlebirdelectronics.com.au/products/universal-crimping-pliers-1-6-to-2-5mm-size-contacts-pa-21) | [Markdown version](https://littlebirdelectronics.com.au/products/universal-crimping-pliers-1-6-to-2-5mm-size-contacts-pa-21.md) --- ## [PRINTinZ Skin for Flashforge - 152mm x 232mm](https://littlebirdelectronics.com.au/products/printinz-skin-for-flashforge-152mm-x-232mm) **Brand:** Adafruit **Price:** $15.40 **Stock:** In stock (Local: 1, Supplier: 0) **SKU:** AF-3097 Looking to improve the printing bed on your Flashforge Creator Pro? Check out the PRINTinZ Skin for Flashforge! The PRINTinZ Skin is a peel and stick surface for 3D printer beds made from the same durable material as the outer layers of the Plate. It's the perfect option for t... [View product details](https://littlebirdelectronics.com.au/products/printinz-skin-for-flashforge-152mm-x-232mm) | [Markdown version](https://littlebirdelectronics.com.au/products/printinz-skin-for-flashforge-152mm-x-232mm.md) --- ## Pagination Page 1 of 2 — showing products 1–20 of 27. Append `&page={n}` to this URL to fetch any page from 1 to 2. - [Next page (2) →](https://littlebirdelectronics.com.au/products.md?hide_unavailable=0&page=2&q=adafruit+pro+trinket+5v+16mhz) - [First page](https://littlebirdelectronics.com.au/products.md?hide_unavailable=0&page=1&q=adafruit+pro+trinket+5v+16mhz) - [Last page (2)](https://littlebirdelectronics.com.au/products.md?hide_unavailable=0&page=2&q=adafruit+pro+trinket+5v+16mhz) --- ## Contact Us **Little Bird Electronics Pty Ltd** ABN: 15 634 521 449 - **Phone:** 1300 240 817 - **Fax:** (02) 8319 2017 - **Email:** team@littlebirdelectronics.com.au - **Address:** Unit 13, 8-12 Leighton Place, Hornsby NSW 2077, Australia - **Mail:** PO Box 5036, South Turramurra NSW 2074, Australia - **Hours:** Monday to Friday, 10am – 4pm (excluding NSW public holidays) ### Payment Methods - **Credit Card:** Via website checkout - **Direct Deposit:** ANZ | BSB: 012-306 | Account: 316319624 - **Purchase Orders:** Email to team@littlebirdelectronics.com.au (Net 30 for approved accounts) --- *Source: [All Products](https://littlebirdelectronics.com.au/products)*