All Products

SKU: LB-LS1347

This 22-in-1 repair tool kit provides everything you need to open and disassemble smartphones, tablets, and other small electronics. Whether you're replacing a cracked screen, swapping a battery, or simply exploring what's inside, this kit has the right tools for the job. Key Features 22-Piece...

SKU: TB-RR0580

A pack of eight 2.2 kΩ metal film resistors rated at 0.5 W (½ W) with ±1% tolerance. These are the same physical size as standard ¼ W carbon film resistors, making them a higher-power drop-in option for through-hole designs. Key Features 2.2 kΩ Resistance – ±1% tolerance for precise circuits ...

SKU: SF-CAB-28304 · MPN: CAB-28304

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends – pin 1 on one side aligns with pin 1 on the other – making it straightforward to connect cameras, displays, and other peripherals. The flexible design allows for e...

SKU: SF-CAB-28302 · MPN: CAB-28302

A short 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends – pin 1 on one side aligns with pin 1 on the other – ideal for compact builds where the camera or display sits close to the main board. The short length m...

SKU: AF-6035 · MPN: ADA6035

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 10cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforward. Designed to work with Raspberry Pi 5 DSI/CSI connectors and RP2350 boards w...

SKU: AF-6036 · MPN: ADA6036

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforward. Designed to work with Raspberry Pi 5 DSI/CSI connectors and RP2350 boards w...

SKU: AF-6034 · MPN: ADA6034

A compact 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — ideal for compact builds where the peripheral sits close to the main board. Designed to work with R...

SKU: DF-SER0059

A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for individual or synchronised control at baud rates up to 1 Mbps. The hybrid gear train...

SKU: DF-FIT0172

A waterproof DC-DC step-up converter that takes 8–18V DC input and outputs a stable 24V at up to 10A (240W). The sealed, shockproof enclosure makes it suitable for robotics, outdoor installations, and demanding environments. Key Features 240W Output – 24V at up to 10A continuous Wide Input Ra...

SKU: WS-25742

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provides example code for Raspberry Pi, Pico, Arduino, STM32, ESP32, and Jetson Nano. ...

SKU: EC-WAW24031A

A 2.4 GHz WiFi antenna with 3 dBi gain, suitable for DIY wireless projects. It provides improved range over built-in PCB antennas on WiFi-enabled microcontrollers and development boards. Key Features 3.0 ± 0.7 dBi Gain – Improved signal strength over stock antennas 2400–2500 MHz Frequency Ran...

SKU: EC-WAW24040A

A 2.4 GHz WiFi antenna with 4 dBi gain and an IPEX (MHF) connector, enclosed in a protective cover. It connects directly to boards with an IPEX/U.FL socket, providing improved wireless range over built-in PCB antennas. Key Features 4 dBi Gain – Higher gain than standard stub antennas for exten...

SKU: DF-FIT0505

A 2.4 GHz omni-directional antenna with 6 dBi gain and an IPEX MHF1 connector, providing strong WiFi signal reception and transmission. The 15 cm cable makes it easy to position the antenna away from the board for optimal placement. Key Features 6 dBi Gain – High gain for extended wireless ran...

SKU: SF-WRL-00144

A tiny 2.4 GHz ceramic chip antenna designed for surface-mount PCB layouts. While it won't match the range of a full-size rubber duck antenna, its extremely compact footprint lets you add wireless capability to space-constrained designs. Works well with Nordic Semiconductor ICs and other 2.4 GHz ...

SKU: AF-944

A 100 mm (4″) swivel dipole antenna with 2 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The swivel joint lets you angle the antenna for optimal signal direction. Key Features 2 dBi Gain – Omni-directional coverage for short-t...

SKU: AF-945

A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range at the cost of a larger form factor. The swivel joint lets you angle the antenna...

SKU: SF-WRL-00145

A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...

SKU: SF-WRL-00558

A large 2.4 GHz rubber duck antenna with 5 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 196 mm (7.7″) long, it provides significantly more range than smaller duck antennas — ideal when you need to push your wireless link further. Key Features 5 dBi Gain – Higher gain for extended...

SKU: DF-SEN0306

A K-band 24GHz millimetre-wave ranging radar sensor with isolated transmitter and receiver antennas. Using FMCW modulation, it measures distance to object surfaces by transmitting and receiving microwaves, with all signal processing integrated on-board. Distance data is output directly via an asy...

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...