XMEGA Xminilab

$148.76

Part Number:  SS-104110008
Brand:  Seeed Studio Australia

The Xminilab is a mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 3.3 x 1.75 inches, and can be mounted directly on a breadboard. The Xminilab can also be used as a development board for the AVR XMEGA microcontroller.   Features:  Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signals. Advanced Trigger: Normal / Single / Auto,...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
The Xminilab is a mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 3.3 x 1.75 inches, and can be mounted directly on a breadboard. The Xminilab can also be used as a development board for the AVR XMEGA microcontroller.
 
Features: 
  • Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signals.
  • Advanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger level.
  • Meter Mode: Average, Peak to peak and Frequency readout.
  • XY Mode (Plot Lissajous patterns or see the phase difference between two waveforms).
  • Spectrum Analyzer with different windowing options and selectable vertical log.
  • Horizontal and Vertical Cursors with automatic waveform measurements.
  • Arbitrary Waveform Generator with Sweep on all parameters.
  • Display options: Persistence, Different grid options, and more.
 
Specifications:
 
General Specifications:
  • ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROM
  • Graphic OLED display 2.42", 128x64 pixels
  • Module size: 3.3" x 1.75"
  • PDI interface.
  • 4 tactile switches
  • USB connectivity: Windows, Linux, MAC, Android
Logic Analyzer specifications:
  • 8 Digital Inputs, 3.3V level.
  • Maximum sampling rate: 2MSPS
  • Frequency counter: 16Mhz
  • Protocol Sniffer: UART, I2C, SPI
  • Internal pull up or pull down.
  • Buffer size: 256
Oscilloscope specifications:
  • 2 Analog Inputs
  • Maximum Sampling rate: 2MSPS
  • Analog Bandwidth: 200kHz
  • Resolution: 8bits
  • Input Impedance: 1M惟
  • Buffer size per channel: 256
  • Input Voltage Range: -14V to +20V
AWG specifications:
  • 1 Analog Output
  • Maximum conversion rate: 1MSPS
  • Analog Bandwidth: 44.1kHz
  • Resolution: 8bits
  • Output current > +/- 7mA
  • Buffer size: 256
  • Output Voltage: +/- 2V
 
Documents:
 
For any technical support or suggestion, please kindly go to our forum.