Xbee Pro IEEE 802.15.4 2.4Ghz 63mW 250Kbps RF Module w/ U.FL Antenna Connector - XBP24-AUI-001J

$129.25

Part Number:  SS-113990075
Brand:  Seeed Studio Australia

XBee-PRO 802.15.4 OEM RF modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing.   XBee-PRO modules are power-amplified versions of XBee modules for extended-range applications. Part of the XBee family of RF products, these modules are easy-to-use,...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
XBee-PRO 802.15.4 OEM RF modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing.
 
XBee-PRO modules are power-amplified versions of XBee modules for extended-range applications. Part of the XBee family of RF products, these modules are easy-to-use, share a common footprint, and are fully interoperable with other XBee products utilizing the same technology. Module users have the ability to substitute one XBee module for another with minimal development time and risk.
 
Features:
No configuration needed for out-of-the-box RF communications
Common XBee footprint for a variety of RF modules
Fast 250 kbps RF data rate to the end node
2.4 GHz for worldwide deployment
Sleep modes supported for extended battery life
 
Specification:
Power output: 63 mW (+18 dBm) North American version ,10 mW (+10 dBm) International version
Indoor/Urban range: Up to 300 ft (90 m)
Outdoor/RF line-of-sight range: Up to 1 mile (1.6 km) RF LOS
Receiver sensitivity: -100 dBm (all variants)
RF data rate: 250 Kbps
Operating frequency: 2.4 GHz
Interface data rate: Up to 115.2 Kbps
 
Networking:
Spread spectrum typ: DSSS (Direct Sequence Spread Spectrum)
Supported network topologies: Point-to-point, point-to-multipoint, & peer-to-peer
Error handling: Retries & acknowledgements
Filtration options: PAN ID, Channel, and 64-bit addresses
Channel capacity: 12 Channels
Addressing: 65,000 network addresses available for each channel
 
Power:
Supply voltage: 2.8 - 3.4 VDC,XBee Footprint Recommendation: 3.0 - 3.4 VDC
Transmit current: 215 mA (@ 3.3 V)
Receive current : 55 mA (@ 3.3 V)
Power-down sleep current: <10 µA at 25° C
 
General:
Frequency band: 2.4000 - 2.4835 GHz
Interface options: 3V CMOS UART
 
Physical Properties:
Size: 0.960 in x 1.297 in (2.438 cm x 3.294 cm)
Weight: 0.10 oz (3g)
Antenna options: U.FL, Reverse Polarity SMA (RPSMA), chip antenna or wired whip antenna
Operating temperature: -40° C to 85° C (industrial)