Wifi Shield (Fi250)

$92.25

Part Number:  SS-113030004
Brand:  Seeed Studio Australia

The Wifi shield is an economic internet solution for Arduino supporting IEEE 802.11b/g/n mode, maximum speed up to 65Mbit/s. It uses an on board antenna so it’s easy to build your project into a small box. The module reserves a UFL connector, so you can use an extra antenna to improve the signal range. There is a key on the board, just push one time to...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
The Wifi shield is an economic internet solution for Arduino supporting IEEE 802.11b/g/n mode, maximum speed up to 65Mbit/s. It uses an on board antenna so it’s easy to build your project into a small box. The module reserves a UFL connector, so you can use an extra antenna to improve the signal range. There is a key on the board, just push one time to change wifi shield as AP mode. The module have a computer interface software, you can control and upgrade the module via USB-UART convertor. The wifi shield contain a Micro SD card socket, it’s like a recorder when wifi shield working as TCP, UDP server. 
 
Specification:
  • Module WIZnet FI250
  • Operating Voltage 5V or 3.3V (Auto select)
  • Current 300mA (maximum)
  • Single band 2.4GHz IEEE 802.11b/g/n
  • Antenna On board PCB antenna (reserver UFL connector)
  • Memory 1MB Flash Memory, 128KB SRAM, 1MB Serial Flash
  • Interface UART(default)/SPI(upgrade firmware)
  • Dimensions 69.0x53.5x23.5 mm
 
Related Part Number:
 
Compatibility:
  • Arduino
  • Seeeduino
  • Grove
 
Application:
wifi shield (fi250)