The Champion Audio Amplifier Kit with Pre-Amplifier Techbrands TB-KC5519 Australia

The Champion Audio Amplifier Kit with Pre-Amplifier

$22.95

Part Number:  TB-KC5519
Brand:  Techbrands Australia

The Champion Audio Amplifier Kit with Pre-Amplifier Refer: Silicon Chip Magazine January 2013 An amplifier and pre-amplifier combination for all those general-purpose audio projects. It uses the AN7511 audio IC to deliver 2W music power into 8 ohms from a 9 to 12V supply. Features low distortion, two inputs (mixed 1:1), over-temperature protection (auto-limiting), Mute and standby control. Pre-amplifier is also suitable for microphones and...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
The Champion Audio Amplifier Kit with Pre-Amplifier
Refer: Silicon Chip Magazine January 2013
An amplifier and pre-amplifier combination for all those general-purpose audio projects. It uses the AN7511 audio IC to deliver 2W music power into 8 ohms from a 9 to 12V supply. Features low distortion, two inputs (mixed 1:1), over-temperature protection (auto-limiting), Mute and standby control. Pre-amplifier is also suitable for microphones and electric guitars, and can be separated from the amplifier for individual use. Kit supplied with silk-screened PCB, heatsink and PCB mount components.

Specifications:
• Operating voltage range: 4 - 13.5VDC
• Output power: up to 4W
• Music power: 3W @ 9 - 12V
• Signal-to-noise ratio: ~65dB
• Frequency Response: -2.5dB @ 20Hz, -0.2dB @ 20kHz
• THD+N, 1kHz: ~0.25%
• Gain: 34dB for Amplifier, up to 58dB with pre-amplifier
• Input Sensitivity for Amplifier only: 52mV RMS @ 5V, 125mV RMS @ 9 - 12V
• Input Sensitivity for Amplifier & Pre-amplifier: 2mV RMS @ 5V, 5mV RMS @ 9 - 12V
• Quiescent current: 2mA (Pre-amplifier) + 30-60mA (Amplifier)
• Standby current: 2mA (Pre-amplifier) + 1-10uA (Amplifier)
• PCB: 101x41mm

Note: Optional 10kohm potentiometer for external volume control use RP-7610


Kit
Kit Form Short Form (circuit only)
Difficulty Simple
PCB Length 101mm
PCB Width 41mm
Application Field Audio Amplifier with Pre-Amplifier
Estimated Construction Time 60min
Tools required Soldering Iron
Additional optional items 10kohm potentiometer
Audio Kit
Audio Device Amplifier
Signal Input Level 52mV
Output power 3W
Audio frequency range 20Hz-20kHz
Audio distortion 0.25%
Signal to noise ratio 65
Audio power supply 3W
Audio gain 34dB
Packaged Dimensions
Packaged Volume 0.42L
Packaged Weight 0.095kg
Packaged Length 20cm
Packaged Width 7cm
Packaged Height 3cm