{"title":"STEMMA Wired Tactile Push-Button Pack - 5 Color Pack","handle":"stemma-wired-tactile-push-button-pack-5-color-pack","url":"/products/stemma-wired-tactile-push-button-pack-5-color-pack","description":"Little clicky switches are standard input \"buttons\" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pressed they are momentarily closed.Each button comes with a candy-colored round cap snapped on. You get one of each color-- blue, white, yellow, red, and black. Best of all, each button board comes with a JST-PH 2mm connector and a matching  JST PH 3-Pin to Male Header Cables - 200mm, so wiring up is a cinch. Simply plug the cable in, then use the black wire to connect to your microcontroller/microcomputer ground, white wire to the input signal pin and the red wire to your power pin (3V or 5V) if you want to have the pull-up resistor activated.If you want to connect to something with alligator clips use our STEMMA to Gator cable. To connect to something with a STEMMA 3-pin connector already, use this cable.Works great with any device that wants a switch - Arduino, CircuitPython, Raspberry Pi, DIY builds...etc!","vendor":"Adafruit","product_type":"physical","in_stock":false,"options":[],"variants":[{"id":4589,"title":"Default Title","sku":"AF-4431","price":15.58,"on_sale":false,"in_stock":false,"available_quantity":0,"option1":"Default Title"}]}