{"title":"SparkPNT GNSS Flex Module - ZED-X20P","handle":"sparkpnt-gnss-flex-module-zed-x20p","url":"/products/sparkpnt-gnss-flex-module-zed-x20p","description":"Build high-precision positioning into your GNSS Flex setup with this swappable ZED-X20P module. It uses the u-blox X20 engine, the successor to the F9 generation, for demanding navigation, control, robotics and vehicle applications.The module connects to a GNSS Flex pHAT carrier board via standardised 2x10-pin headers and breaks out USB, dual UARTs and I²C for use with a Raspberry Pi or similar single-board computer. It is designed to be pin-compatible with the SparkPNT GNSS Flex ecosystem for easier future upgrades.An external GNSS antenna and a GNSS Flex carrier board are required. The module provides a U.FL connector for an external antenna, or you can use the SMA connector on a GNSS Flex pHAT carrier by linking the U.FL connectors with a short U.FL cable.Documentation is available from the manufacturer, including schematic files, KiCad files, board dimensions, STEP file, hookup guide, u-center 2 software information, datasheet, integration manual, interface manual and related application notes.Features:RTK & PPP Ready: Supports Real-time Kinematics (RTK), PPP-RTK, and Precise Point Positioning* for ultimate flexibility.L-Band Corrections: Natively supports L-band correction services*, eliminating the need for external receivers.High Update Rate: Ensures smooth and reliable operation in high-speed robotics and vehicle control systems.Uncompromising Security: Features multi-layered defenses including a Root of Trust, advanced jamming and spoofing detection, and Galileo OSNMA cryptographic authentication.Programmable flash memoryCarrier phase outputJamming detectionGalileo OSNMASecure bootAssistNowPointPerfectSpecifications:Module: u-blox ZED-X20P Allband, GNSS moduleGNSS Constellation: GPS (USA)GNSS Constellation: Galileo (EU)GNSS Constellation: BDS (China)GNSS Constellation: QZSS (Japan)GNSS Constellation: NavIC (India)SBAS System: WAAS (USA)SBAS System: EGNOS (EU)SBAS System: BDSBAS (China)SBAS System: MSAS (Japan)SBAS System: GAGAN (India)Headers: Two 2x20-pin, 2mm-pitch female headersSocket: 40-pin socket for GNSS Flex pHAT / BreakoutPower: 3.3VPower: Backup powerPower: USB bus detect (not a power source)USB: USB (x1) (Read USB note)UART: UART (x2)I2C: I2C busPPS signal: PPS signal (x1)PVT signal: PVT signal (x1)RTK signal: RTK signal (x1)Event signal: Event signal (x1)U.FL Connector: GNSS Antenna (Active, Multi-band)U.FL Connector: 3.3V power for an active antennaDimensions: 44.0mm x 34.0mm (Approx. 1.73\" x 1.34\")Mounting holes: Four mounting holesMounting holes: 4-40 screw compatibleHole centres: 39.0mm x 29.0mmHeader spacing: 36.0mmUSB interface: ZED-X20P USB (D+ and D-) (Read USB note)I2C interface: ZED-X20P I2C (SDA and SCL)Flex COM1: ZED-X20P UART1 (TX and RX only)Flex COM2: ZED-X20P UART2 (TX and RX only)Flex COM3: N/CFlex COM4: N/CPPS1: ZED-X20P TIMEPULSEPPS2: N/CEVENTA: ZED-X20P EXTINTEVENTB: N/CRTK LED: ZED-X20P RTK_STAT (Inverted)PVT LED: ZED-X20P GEO_STAT (Geofence)Supply voltage: 2.7V to 3.6VGPS: L1C/A, L2C, L5Galileo: E1B/C, E5a, E6BeiDou: B1I, B1C, B2a, B3IQZSS: L1C/A, L1C/B*, L2C, L5, L6NavIC: L1*, L5SBAS: L1C/AInterface: USB (Read USB note)Interface: UART x2Interface: SPIInterface: I2CService: AssistNowService: PointPerfectOperating temperature: -40°C to 85°C*: Feature in development*According to u-blox, support for Precise Point Positioning (PPP) and full L-band correction services is still under development and will be made available through a future firmware update.","vendor":"SparkFun","product_type":"GNSS Module","in_stock":true,"options":[],"variants":[{"id":16018,"title":"Default Title","sku":"SF-GPS-29362","mpn":"GPS-29362","price":540.8,"on_sale":false,"in_stock":true,"available_quantity":38}]}