{"title":"SparkPNT DAN-F10N GNSS Flex Module","handle":"sparkpnt-gnss-flex-module-dan-f10n","url":"/products/sparkpnt-gnss-flex-module-dan-f10n","description":"Add modular GNSS positioning to a Raspberry Pi or similar single-board computer with this compact SparkPNT GNSS Flex receiver module. It is built around the u-blox DAN-F10N and is designed for reliable metre-level positioning, including challenging urban environments.The module fits the SparkPNT GNSS Flex ecosystem, making it easy to swap, repair or upgrade a receiver without redesigning the rest of your system. It breaks out key UART, PPS and event signals for integration with a GNSS Flex pHAT or compatible carrier.A dual-band patch antenna is integrated on the module, and a U.FL connector is available for an optional external L1/L5 GNSS antenna. Software support includes compatibility with u-blox u-center 2 for configuration, real-time analysis and data logging.Features:Modular GNSS Flex design: Pin-compatible with a GNSS Flex pHAT and easily swappable.Standardised headers: 2x10-pin (2mm pitch) headers break out key UART, PPS, and event signals.Urban positioning: Dual-band L1/L5 GNSS technology for metre-level accuracy in challenging environments like dense urban canyons.Multipath mitigation: Sophisticated multipath mitigation engine.RF filtering: SAW-LNA-SAW filter chain.LTE B13 notch: Additional notch filter for the LTE B13 band.Integrated antenna: Integrated 20mm x 20mm x 8mm dual-band patch antenna.RHCP antenna: Right-Hand Circularly Polarized antenna with wide beamwidth.External antenna option: Onboard switch allows connection of an external dual-band antenna.u-center 2 support: Compatible with u-blox u-center 2 GNSS software for real-time performance analysis, configuration, and data logging.Fast Acquisition: Utilise AssistNow Online, Offline, and Autonomous A-GNSS services for significantly reduced time-to-first-fix.Standard Protocols: Interface directly using NMEA 4.11 or the UBX binary protocol.U.FL connector: External antenna connector for an optional GNSS antenna.Specifications:Flex module GNSS module: u-blox DAN-F10NFlex module type: GNSS moduleGNSS constellation: GPS (USA)GNSS constellation: Galileo (EU)GNSS constellation: BDS (China)GNSS constellation: QZSS (Japan)GNSS constellation: NavIC (India)SBAS system: WAAS (USA)SBAS system: EGNOS (EU)SBAS system: BDSBAS (China)SBAS system: MSAS (Japan)SBAS system: GAGAN (India)SBAS system: KASS (Korea)SBAS system: SouthPAN (Australian + New Zealand)Flex module headers: Two 2x20-pin, 2mm-pitch female headersFlex module socket: 40-pin socket for GNSS Flex systemFlex module power signal: 3.3VFlex module power signal: Backup powerFlex module power signal: USB bus detect (not a power source)Flex module interface signal: UARTFlex module timing signal: PPS signal (x1)Flex module event signal: Event indicators (x1)U.FL connector: GNSS Antenna (optional, L1/L5 dual-band)Dimensions: 34.0 x 44.0mmWeight: 23.85gI2C: N/CFlex COM1: DAN-F10N UART (TX and RX only)Flex COM2: N/CFlex COM3: N/CFlex COM4: N/CPPS1: DAN-F10N TIMEPULSEPPS2: N/CEVENTA: DAN-F10N EXTINTEVENTB: N/CRTK LED: N/CPVT LED: N/CDAN-F10N general feature: GNSS receiverDAN-F10N engine: u-blox F10 engineGPS: L1 C/A, L5QZSS: L1C/A, L5Galileo: E1B/C, E5aBeiDou: B1C, B2aNavIC: L5SBAS: L1 C/A, L1S, L1Sb, B1CSensitivity - Tracking & Navigation: -164dBmSensitivity - Reacquisition: -156dBmSensitivity - Cold start: -145dBmSensitivity - Hot start: -156dBmUpdate rate: Up to 10HzHorizontal position accuracy: 1.0m CEP (with SBAS)Horizontal position accuracy: 1.5m CEP (without SBAS)Acquisition - Cold start: 28sAcquisition - Aided start: 2sAcquisition - Reacquisition: 2sInterface: 1x UARTInterface: Digital I/ODigital I/O: Configurable timepulse (0.25Hz to 10MHz)Digital I/O: EXTINT input for wakeupDebug interface: JTAG debug interface (disabled by default)Communication protocol - NMEA: 2.1, 2.3, 4.0, 4.10, 4.11 (default)Communication protocol: UBX binaryCommunication protocol: RTCM v3.4Communication protocol: SPARTN v2.0.2Security: RF interference and jamming detection/reportingSecurity: Spoofing detection/reportingSecurity: Secure boot for firmware integritySecurity: Signed UBX messages (SHA-256Misc: Antenna switch functionMisc: Supports external active antenna (optional)Timing components: Integrated RTC crystal and TCXOPower supply: 2.7V to 3.6VBackup supply: 1.65V to 3.6VPower consumption: 63 mW (continuous tracking, 3V)Temperature range: -40°C to +85°CPackage: 56-pin LCC packagePackage dimensions: 20 x 20 x 11.6mmPackage weight: 17.5gSuitable for GNSS projects that need a swappable receiver module, dual-band satellite support and the option to use either the integrated patch antenna or an external active antenna.","vendor":"SparkFun","product_type":"GNSS Module","in_stock":true,"options":[],"variants":[{"id":16017,"title":"Default Title","sku":"SF-GPS-29061","mpn":"GPS-29061","price":78.6,"on_sale":false,"in_stock":true,"available_quantity":30}]}