{"title":"Qwiic WAV Trigger Pro","handle":"sparkfun-qwiic-wav-trigger-pro","url":"/products/sparkfun-qwiic-wav-trigger-pro","description":"This compact audio trigger board is a high-fidelity polyphonic WAV player for interactive installations, instruments, exhibits and embedded sound projects. It plays uncompressed 16-bit, 44.1kHz mono and stereo WAV files from a microSD card, with CD-quality audio and very low trigger-to-sound latency.Playback can be controlled using eight programmable trigger inputs, Qwiic I2C, USB MIDI, or Serial UART MIDI. It can operate as both a USB MIDI device and, with alternate firmware and solder jumper changes, a USB MIDI host for standalone USB MIDI control without a computer.Audio is output over two unbalanced line-level channels, Left and Right, routed to a 0.1-inch spaced plated through-hole connector, so some soldering is required. Presets are handled with spreadsheet .csv files, making it possible to define multiple actions per MIDI note based on channel and velocity.Qwiic I2C control is supported through an Arduino library, making it a good fit for Qwiic-enabled microcontroller projects where reliable multi-track audio playback is needed.Features:WAV file support: Support for up to 4096 uncompressed 16-bit, 44.1kHz mono and stereo WAV files - CD qualityPolyphonic playback: Play and mix up to 24 tracks independently and simultaneously with independent pitch controlTrigger latency: Trigger-to-sound latency: 2-3msecs (Typ.), 5msecs (Max)Output level: Direct Line Level 2.1-V RMS OutputStereo output: True Line-Level Stereo OutputMIDI-USB: MIDI-USB SupportUSB MIDI modes: Functions as both MIDI-USB Device and MIDI-USB HostMIDI control: MIDI Control for up to 8 Independent Actions per noteOutput routing: Route tracks to any combination of outputsTrigger inputs: 8 Individually Configurable Trigger InputsTrigger polarity: Can be inverted (active LOW or HIGH)Trigger modes: Can be set to edge, latched, or level-sensitiveTrigger tolerance: 3.3V tolerantSerial console: Serial Console Interface (3.3V Only)Serial connection: Connected to STM32's TX/RX pinsQwiic control: Qwiic (I2C) control support through Arduino LibrarySpecifications:Board footprint: 1.75in. x 1.5in.Supported file count: up to 4096 uncompressed 16-bit, 44.1kHz mono and stereo WAV filesAudio format: uncompressed 16-bit, 44.1kHz mono and stereo WAV filesAudio quality: CD audio qualityPolyphony: play and mix up to 24 tracks simultaneously and independentlyPitch control: independent pitch controlTrigger-to-sound latency: 2-3msecs (Typ.), 5msecs (Max)Control inputs: eight programmable trigger inputsI2C control: I2C (Qwiic)MIDI control: MIDI (USB or Serial UART)USB MIDI mode: functions as both a USB MIDI device and hostUSB MIDI Host power: up to 500mA@5V to a connected MIDI device over USB-CAudio outputs: two unbalanced channels (Left & Right)Audio output connector: 0.1\"-spaced plated through-hole (PTH) connectorOutput level: Direct Line Level 2.1-V RMS OutputStereo output: True Line-Level Stereo OutputMIDI-USB support: MIDI-USB SupportMIDI-USB device support: MIDI-USB DeviceMIDI-USB host support: MIDI-USB HostMIDI actions per note: up to 8 Independent Actions per notePreset file format: spreadsheet (.csv) filesPreset action count: up to 8 actions per MIDI note based on channel and velocityPreset action parameters: specific gain, balance, attack, release, and pitchTrigger inputs: 8 Individually Configurable Trigger InputsTrigger input polarity: Can be inverted (active LOW or HIGH)Trigger input modes: Can be set to edge, latched, or level-sensitiveTrigger input tolerance: 3.3V tolerantSerial console interface: 3.3V OnlySerial console connection: Connected to STM32's TX/RX pinsQwiic control support: Qwiic (I2C) control support through Arduino LibraryUSB MIDI Host requirement: requires uploading alternate firmware and adjusting the solder jumpersIdeal for makers who need responsive multi-sound playback from triggers, MIDI gear, or a Qwiic-enabled controller.","vendor":"SparkFun","product_type":"Audio Trigger Board","in_stock":true,"options":[],"variants":[{"id":15571,"title":"Default Title","sku":"SF-WIG-25860","mpn":"WIG-25860","price":131.55,"on_sale":false,"in_stock":true,"available_quantity":71}]}