{"title":"IoT Node for LoRaWAN® Development Board","handle":"sparkfun-iot-node-for-lorawan","url":"/products/sparkfun-iot-node-for-lorawan","description":"This development board is designed to make building a LoRaWAN® IoT end node much less fiddly. It combines Digi X-ON™ onboarding with the SparkFun Qwiic ecosystem, so you can connect supported Qwiic sensors and get data moving to the cloud quickly.The board ships with firmware installed that can connect to Digi X-ON, detect an attached sensor and post data to the X-ON cloud. Configuration is handled over a serial console connection, making it suitable for rapid evaluation and early prototypes.For custom projects, firmware development is primarily supported in the Arduino environment using Digi’s Arduino XBee® library. The pre-installed application is open source, and the RP2350 microprocessor also supports development environments including Arduino, MicroPython and the Raspberry Pi Pico SDK.The Digi XBee® LR module for LoRaWAN® is connected directly to a serial port on the RP2350, allowing control of the LoRaWAN® module via Digi’s development library. The module uses LoRa™ modulation for Non-Line-of-Sight two-way communications in long-range and high-noise RF environments.Features:Digi X-ON setup: Supports rapid creation and deployment of a LoRaWAN® IoT sensor.Digital data block: Register the IoT Node – LoRaWAN® board quickly using the digital data block on the module.Qwiic sensor support: Add a supported Qwiic sensor to the Node board.Pre-installed firmware: Automatically connects to Digi X-ON.Sensor detection: Detects an attached sensor.Cloud posting: Posts data to the X-ON cloud.Serial configuration: Configured via a serial console connection.Custom firmware: Full software customization and development are supported.Arduino development: Firmware development is performed primarily in the Arduino environment.Digi library support: Enabled by an Arduino XBee® library from Digi.Open-source application: The pre-installed application is open source and readily available.Development environments: Supports Arduino, micropython, and the Raspberry Pi pico SDK.Flash: 16 MB of flash.PSRAM: 8 MB PSRAM.Qwiic connector: Qwiic connector.LiPo charging: On-board Lithium Ion (LiPo) battery charging.Fuel gauge: Fuel gauge circuits.microSD: microSD card.I/O: A variety of IO pins.Indicators and input: RGB LED and user button.LoRa modulation: Uses LoRa™ modulation for Non-Line-of-Sight (NLOS) two-way communications.RF environments: Designed for long-range and high-noise RF environments.X-ON activation: Each module is pre-activated on Digi's X-ON cloud platform.Specifications:Microcontroller: Raspberry Pi Foundation's RP2350A MicrocontrollerGPIO Pins: 15 Multifunctional GPIO PinsPWM: Up to eight 2-channel PWMsUART: Up to two UARTsI2C: Up to two I2C busesSPI: Up to two SPI busesQSPI Flash Memory: 16MB QSPI Flash MemoryPSRAM Memory: 8MB PSRAM MemoryLoRaWAN module: Digi's XBee LR ModuleTransceiver: LoRaWAN® TransceiverModular certifications: FCC and ICFrequency Range: SM 902 to 928 MHz, 868 to 870 MHzDimensions: 83mm x 59mmUSB-C Connectors: USB-C ConnectorsUSB support: USB 1.1 Host/Device supportUSB-C connector: XBLRLiPo battery connector: 2-pin JST Connector for LiPo Battery (not included)Qwiic connector: 4-pin Qwiic ConnectorLiPo Charger: LiPo ChargerCharger controller: MCP73831 Charger Management ControllerCharge rate: 500mALiPo fuel gauge: MAX17048 LiPo Fuel GaugeSelection switch: XBLR/UART Selection SwitchPWR LED: PWR - Red 3.3V power indicatorCHG LED: CHG - Yellow battery charging indicatorButton: BootButton: ResetButton: UserPair it with a compatible LoRaWAN® gateway, antenna and supported Qwiic sensor to start prototyping connected sensor nodes.","vendor":"SparkFun","product_type":"IoT Development Board","in_stock":true,"options":[],"variants":[{"id":15860,"title":"Default Title","sku":"SF-WRL-26060","mpn":"WRL-26060","price":216.35,"on_sale":false,"in_stock":true,"available_quantity":23}]}