{"title":"GNSS Flex pHAT with DAN-F10N Dual-Band GNSS Module","handle":"sparkfun-gnss-flex-phat-dan-f10n","url":"/products/sparkfun-gnss-flex-phat-dan-f10n","description":"Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT mounts via an extended 40-pin header and connects to the included GNSS module through standardised 2x20-pin, 2mm-pitch headers, so modules can be replaced or upgraded later. It also breaks out USB-C data, a microSD socket for logging, Qwiic, antenna connections, status LEDs and isolation jumpers.The DAN-F10N module includes an integrated dual-band patch antenna and supports an external dual-band antenna via U.FL when your installation needs a different antenna location or better reception. It is compatible with u-blox u-center 2 software for real-time analysis, configuration and data logging.Features:Raspberry Pi Connectivity: Standard 40-pin GPIO header for a direct, secure connection.USB-C Port: Provides an alternative data interface to the GNSS module.microSD Card Slot: Perfect for data logging position, velocity, and time data.Mounting Hardware Included: Comes with the necessary standoffs, screws, and an extended header for a clean, stable setup.Dual-band GNSS: Uses L1/L5 GNSS technology for metre-level positioning.Urban performance: Multipath mitigation engine for challenging environments like dense urban canyons.RF filtering: SAW-LNA-SAW filter chain and an additional notch filter for the LTE B13 band.Integrated antenna: High-performance integrated dual-band patch antenna.Antenna flexibility: Onboard switch allows connection of an external dual-band antenna.Software support: Compatible with u-blox u-center 2 GNSS software for real-time performance analysis, configuration, and data logging.Fast Acquisition: Utilise AssistNow Online, Offline, and Autonomous A-GNSS services for significantly reduced time-to-first-fix.Standard Protocols: Interface directly with the module using NMEA 4.11 or the UBX binary protocol.External antenna option: Users have the option to connect an external GNSS antenna to their GNSS receiver.External antenna connector: The GNSS Flex module has a U.FL connector for an external antenna.Specifications:GNSS Flex pHAT Raspberry Pi header: 40-pin socket for Raspberry Pi headerGNSS Flex pHAT module header: 40-pin header for GNSS Flex modulesGNSS Flex pHAT headers: Two 2x20-pin, 2mm-pitch male headersGNSS Flex pHAT power: 3.3VGNSS Flex pHAT backup power: Backup powerGNSS Flex pHAT USB bus detect: USB bus detect (not a power source)GNSS Flex pHAT USB data: USB dataGNSS Flex pHAT UART: UART (x4)GNSS Flex pHAT SD card: SD cardGNSS Flex pHAT I2C bus: I2C busGNSS Flex pHAT PPS signal: PPS signal (x2)GNSS Flex pHAT LED indicators: LED indicators (x2)GNSS Flex pHAT event indicators: Event indicators (x2)GNSS Flex pHAT USB connector: USB-C connectorGNSS Flex pHAT module interface: Interfaces directly w/ GNSS Flex ModuleGNSS Flex pHAT antenna bridge: Antenna bridgeGNSS Flex pHAT U.FL connector: U.FL connectorGNSS Flex pHAT SMA connector: SMA connectorGNSS Flex pHAT card socket: µSD card socketGNSS Flex pHAT Qwiic connector: Qwiic connectorGNSS Flex pHAT PWR LED: PWR (Red)GNSS Flex pHAT PPS LED: PPS (Yellow)GNSS Flex pHAT RTK LED: RTK (White)GNSS Flex pHAT PVT LED: PVT (Blue)GNSS Flex pHAT jumpers: Twenty-four jumpersGNSS Flex pHAT Raspberry Pi GPIO isolation: Raspberry Pi GPIO isolation (x16)GNSS Flex pHAT LED power isolation: LED power isolation (x4)GNSS Flex pHAT I2C pull-up resistors: I2C pull-up resistors (x4)Flex Module Interface I2C: N/CFlex Module Interface Flex COM1: DAN-F10N UART (TX and RX only)Flex Module Interface Flex COM2: N/CFlex Module Interface Flex COM3: N/CFlex Module Interface Flex COM4: N/CFlex Module Interface PPS1: DAN-F10N TIMEPULSEFlex Module Interface PPS2: N/CFlex Module Interface EVENTA: DAN-F10N EXTINTFlex Module Interface EVENTB: N/CFlex Module Interface RTK LED: N/CFlex Module Interface PVT LED: N/CDAN-F10N module: u-blox DAN-F10N GNSS moduleDAN-F10N GNSS constellation GPS: GPS (USA)DAN-F10N GNSS constellation Galileo: Galileo (EU)DAN-F10N GNSS constellation BDS: BDS (China)DAN-F10N GNSS constellation QZSS: QZSS (Japan)DAN-F10N GNSS constellation NavIC: NavIC (India)DAN-F10N SBAS system WAAS: WAAS (USA)DAN-F10N SBAS system EGNOS: EGNOS (EU)DAN-F10N SBAS system BDSBAS: BDSBAS (China)DAN-F10N SBAS system MSAS: MSAS (Japan)DAN-F10N SBAS system GAGAN: GAGAN (India)DAN-F10N SBAS system KASS: KASS (Korea)DAN-F10N SBAS system SouthPAN: SouthPAN (Australian + New Zealand)DAN-F10N Flex Module headers: Two 2x20-pin, 2mm-pitch female headersDAN-F10N Flex Module system socket: 40-pin socket for GNSS Flex systemDAN-F10N Flex Module power: 3.3VDAN-F10N Flex Module backup power: Backup powerDAN-F10N Flex Module USB bus detect: USB bus detect (not a power source)DAN-F10N Flex Module UART: UARTDAN-F10N Flex Module PPS signal: PPS signal (x1)DAN-F10N Flex Module event indicators: Event indicators (x1)DAN-F10N Flex Module U.FL Connector: GNSS Antenna (optional, L1/L5 dual-band)DAN-F10N Flex Module dimensions: 34.0 x 44.0mmDAN-F10N Flex Module weight: 23.85gDAN-F10N receiver: GNSS receiverDAN-F10N engine: u-blox F10 engineDAN-F10N GPS bands: L1 C/A, L5DAN-F10N QZSS bands: L1C/A, L5DAN-F10N Galileo bands: E1B/C, E5aDAN-F10N BeiDou bands: B1C, B2aDAN-F10N NavIC band: L5DAN-F10N SBAS bands: L1 C/A, L1S, L1Sb, B1CDAN-F10N sensitivity tracking & navigation: -164dBmDAN-F10N sensitivity reacquisition: -156dBmDAN-F10N sensitivity cold start: -145dBmDAN-F10N sensitivity hot start: -156dBmDAN-F10N update rate: Up to 10HzDAN-F10N horizontal position accuracy with SBAS: 1.0m CEP (with SBAS)DAN-F10N horizontal position accuracy without SBAS: 1.5m CEP (without SBAS)DAN-F10N acquisition cold start: 28sDAN-F10N acquisition aided start: 2sDAN-F10N acquisition reacquisition: 2sDAN-F10N interfaces: 1x UARTDAN-F10N digital I/O: Digital I/ODAN-F10N configurable timepulse: 0.25Hz to 10MHzDAN-F10N EXTINT input: EXTINT input for wakeupDAN-F10N JTAG debug interface: disabled by defaultDAN-F10N NMEA protocol: 2.1, 2.3, 4.0, 4.10, 4.11 (default)DAN-F10N UBX protocol: UBX binaryDAN-F10N RTCM protocol: RTCM v3.4DAN-F10N SPARTN protocol: SPARTN v2.0.2DAN-F10N RF security: RF interference and jamming detection/reportingDAN-F10N spoofing security: Spoofing detection/reportingDAN-F10N secure boot: Secure boot for firmware integrityDAN-F10N signed UBX messages: Signed UBX messages (SHA-256DAN-F10N antenna switch: Antenna switch functionDAN-F10N external active antenna: Supports external active antenna (optional)DAN-F10N timing components: Integrated RTC crystal and TCXODAN-F10N power supply: 2.7V to 3.6VDAN-F10N backup supply: 1.65V to 3.6VDAN-F10N power consumption: 63 mW (continuous tracking, 3V)DAN-F10N temperature range: -40°C to +85°CDAN-F10N package: 56-pin LCC packageDAN-F10N package dimensions: 20 x 20 x 11.6mmDAN-F10N package weight: 17.5gIntegrated patch antenna dimensions: 20mm x 20mm x 8mmIntegrated patch antenna polarisation: Right-Hand Circularly Polarized (RHCP)Default Raspberry Pi serial bus TX: GPIO14/Pin 8Default Raspberry Pi serial bus RX: GPIO15/Pin 9This product requires a Raspberry Pi or similar single-board computer with a compatible 40-pin header. For best results, choose an antenna setup suited to your enclosure and installation environment.","vendor":"SparkFun","product_type":"GNSS pHAT","in_stock":false,"options":[],"variants":[{"id":15779,"title":"Default Title","sku":"SF-GPS-29491","mpn":"GPS-29491","price":117.9,"on_sale":false,"in_stock":false,"available_quantity":0}]}