{"title":"DAN-F10N Dual-Band L1/L5 GNSS Breakout","handle":"sparkfun-dualband-l1-l5-gnss-breakout-dan-f10n","url":"/products/sparkfun-dualband-l1-l5-gnss-breakout-dan-f10n","description":"Built around the u-blox F10 engine, this GNSS breakout receives L1 and L5 frequency bands simultaneously for reliable metre-level positioning, even in challenging environments such as dense urban canyons. u-blox multipath mitigation helps isolate the strongest signals, while the SAW-LNA-SAW RF front-end and LTE B13 notch filter help reject interference from nearby cellular modems.The board includes an integrated 20mm x 20mm x 8mm RHCP dual-band patch antenna with a wide beamwidth for flexible device orientation. An onboard antenna switch also allows connection to an external dual-band antenna when your application needs a different mounting position or antenna type.Configuration, data logging and real-time performance analysis are supported through u-blox u-center-2 software. The module is compatible with AssistNow Online, Offline and Autonomous A-GNSS services, and communicates using standard NMEA 4.11 and UBX binary protocols.Features:u-blox DAN-F10N GNSS moduleConcurrent signal receptionL1 and L5 frequency bandsGNSS constellation: GPS (USA)GNSS constellation: Galileo (EU)GNSS constellation: BDS (China)GNSS constellation: QZSS (Japan)GNSS constellation: NavIC (India)SBAS system: WASS (USA)SBAS system: EGNOS (EU)SBAS system: BDSBAS (China)SBAS system: MSAS (Japan)SBAS system: GAGAN (India)SBAS system: KASS (Korea)SBAS system: SouthPAN (Australian + New Zealand)Built-in NIC anti-jamming unitFour mounting holesUSB-C connectorBackup batteryGNSS receiveru-blox F10 engineDigital I/OEXTINT input for wakeupJTAG debug interface (disabled by default)RF interference and jamming detection/reportingSpoofing detection/reportingSecure boot for firmware integritySigned UBX messages (SHA-256Antenna switch functionSupports external active antenna (optional)Integrated RTC crystal and TCXOSpecifications:Concurrent signal reception: 5 + QZSSBreakout board dimensions: 1.60\" x 1.60\" (40.6mm x 40.6mm)Breakout board weight: 0.84oz (23.75g)Mounting hole compatibility: 4-40 screw compatibleConnections: 14 PTH PinsUART interfaces: (x1)Connections: 6 PTH pins (BlueSMiRF/Serial-to-UART)PWR LED: Red 3.3V power indicatorPPS LED: Green PPS signal indicatorGPS: L1 C/A, L5QZSS: L1C/A, L5Galileo: E1B/C, E5aBeiDou: B1C, B2aNavIC: L5SBAS: L1 C/A, L1S, L1Sb, B1CTracking & Navigation sensitivity: -164dBmReacquisition sensitivity: -156dBmCold start sensitivity: -145dBmHot start sensitivity: -156dBmUpdate rate: Up to 10HzHorizontal position accuracy: 1.0m CEP (with SBAS)Horizontal position accuracy: 1.5m CEP (without SBAS)Cold start acquisition: 28sAided start acquisition: 2sReacquisition acquisition: 2sInterfaces: 1x UARTConfigurable timepulse: 0.25Hz to 10MHzNMEA: 2.1, 2.3, 4.0, 4.10, 4.11 (default)Communication protocol: UBX binaryCommunication protocol: RTCM v3.4Communication protocol: SPARTN v2.0.2Power supply: 2.7V to 3.6VBackup supply: 1.65V to 3.6VPower consumption: 63 mW (continuous tracking, 3V)Temperature range: -40°C to +85°CPackage: 56-pin LCC packagePackage dimensions: 20 x 20 x 11.6mmPackage weight: 17.5gA strong fit for navigation, tracking, timing and robotics projects that need dual-band GNSS performance in a compact breakout format.","vendor":"SparkFun","product_type":"GNSS Breakout","in_stock":true,"options":[],"variants":[{"id":15778,"title":"Default Title","sku":"SF-GPS-28435","mpn":"GPS-28435","price":117.9,"on_sale":false,"in_stock":true,"available_quantity":28}]}