{"title":"Digi X-ON LoRaWAN IoT Node & Gateway Kit (North America)","handle":"sparkfun-digi-x-on-kit-for-lorawan-north-america","url":"/products/sparkfun-digi-x-on-kit-for-lorawan-north-america","description":"This kit brings together the main parts needed to evaluate and deploy a LoRaWAN® IoT sensor system: a Digi HX15 Gateway for LoRaWAN®, a SparkFun IoT Node for LoRaWAN® board and a SparkFun ENS160/BME280 Qwiic Environmental Combo Board.The IoT Node ships with firmware installed that automatically connects to Digi X-ON™, detects an attached sensor and posts data to the X-ON cloud. It is configured over a serial console connection, making it useful for quick evaluation as well as full custom development.Firmware development is primarily supported in the Arduino environment using Digi’s Arduino XBee® library. The node is built around the Raspberry Pi RP2350 and also supports development environments including MicroPython and the Raspberry Pi Pico SDK.The kit includes a free 30-day subscription to the Digi X-ON™ device management platform and free cellular connectivity.Features:Includes Digi HX15 Gateway for LoRaWAN®.Includes SparkFun IoT Node for LoRaWAN® board.Includes SparkFun Environmental Combo Breakout - ENS160/BME280 (Qwiic).Integrated Digi X-ON technology for creating and deploying a LoRaWAN® IoT sensor in minutes.IoT Node registration using the digital data block on the module.Pre-installed firmware automatically connects to Digi X-ON.Pre-installed firmware detects an attached sensor.Pre-installed firmware posts data to the X-ON cloud.Configured via a serial console connection.Full software customisation and development supported with the IoT Node for LoRaWAN® board.Firmware development performed primarily in the Arduino environment.Enabled by an Arduino XBee® library from Digi.Compatible with the wide range of Qwiic sensors available from SparkFun.Pre-installed application is open source and readily available.RP2350 supports Arduino.RP2350 supports micropython.RP2350 supports the Raspberry Pi pico SDK.Digi XBee® LR module is directly connected to a serial port of the RP2350.Direct control and access to the LoRaWAN® module via a development library provided by Digi.Digi XBee® LR uses LoRa™ modulation for Non-Line-of-Sight (NLOS) two-way communications.Designed for long-range and high-noise RF environments.Automated connection and two-way device management.Each module is pre-activated on Digi's X-ON cloud platform.16 MB of flash.8 MB PSRAM.Qwiic connector.On-board Lithium Ion (LiPo) battery charging.Fuel gauge circuits.microSD card.A variety of IO pins.RGB LED and user button.Specifications:Digi HX15 Gateway for LoRaWAN®: USInterfaces: USEthernet Backhaul: RJ-45, 10/100/1000 MCellular Backhaul: LTE Cat 1 or Cat M1/NB-IoT multi-region, up to 10 Mbps, with 2G fallback for EUSupported Bands LTE: B2, B4, B12; 3G: B2, B4, B5LTE SIM: Micro SIM (3FF), pre-activated SIM card included on LTE gatewaysCellular Antennas: LTE, 3G, 2G,3G (SMA type), omni-directional, 50 Ω, max. input 25 WRegional Bands: US915Max TX Power: +27 dBmRX Sensitivity: −138 dBmChannels: 8 Rx / 1 TxLORA Antenna: −1.7 dBm (SMA type), omni-directional, 50 Ω, max. input 25 WMicrocontroller: Raspberry Pi Foundation's RP2350A MicrocontrollerGPIO Pins: 15 Multifunctional GPIO PinsPWM: Up to eight 2-channel PWMsUART: Up to two UARTsI2C: Up to two I2C busesSPI: Up to two SPI busesQSPI Flash Memory: 16MB QSPI Flash MemoryPSRAM Memory: 8MB PSRAM MemoryDigi's XBee LR Module: LoRaWAN TransceiverDigi's XBee LR Module: Modular certifications for FCC and ICFrequency Range: SM 902 to 928 MHz, 868 to 870 MHzDimensions: 83mm x 59mmUSB-C Connectors: USB 1.1 Host/Device supportUSB-C Connectors: XBLRLiPo Battery Connector: 2-pin JST Connector for LiPo Battery (not included)Qwiic Connector: 4-pin Qwiic ConnectorLiPo Charger: MCP73831 Charger Management ControllerCharge rate: 500mALiPo Fuel Gauge: MAX17048 LiPo Fuel GaugeSelection Switch: XBLR/UART Selection SwitchLED: PWR - Red 3.3V power indicatorLED: CHG - Yellow battery charging indicatorButton: BootButton: ResetButton: UserQwiic-Enabled Connectors: 2x Qwiic-Enabled ConnectorsInput Voltage Range: Typically 3.3V via Qwiic cableENS160 I2C Addresses: 0x53 (Default) or 0x52ENS160: Wide Operating RangeENS160 VDD: 1.71 1.98VENS160 VDDIO: 1.71V to 3.6VENS160 Temperature: -40°C to +85°CENS160 Humidity: 5% to 95% (non-condensing)IAQ standard compliance: AQI, eCO2, and TVOCAir Quality Index: Umweltbundesamt (AQI-UBA)AQI-UBA Range: 1 to 5AQI-UBA Resolution: 1Equivalent Carbon Dioxide (eCO2) Range: 400 to 65,000 ppmEquivalent Carbon Dioxide (eCO2) Resolution: 1 ppmTotal Volatile Organic Compound (TVOC) Range: 0 to 65,000 ppbTotal Volatile Organic Compound (TVOC) Resolution: 1 ppbENS160: Immunity to humidity and ozoneENS160: Superior output stability over the whole temperature and relative humidity operating rangesENS160: Effective ozone compensationENS160: Independent sensor heater control for highest VOC selectivity and outstanding background discriminationBME280 VDD: 1.71V to 3.6VBME280 VDDIO: 1.2V to 3.6VBME280 I2C Addresses: 0x77 (Default) or 0x76BME280 Temperature Operating Range: -40°C to 85°CBME280 Temperature Accuracy: Full accuracy to ± 0.5°C from -0°C to 65°CBME280 Temperature Resolution: 0.01°CBME280 Humidity Operating Range: 0% to 100% RHBME280 Humidity Accuracy: Accurate to ±3% from 20% -80% RHBME280 Humidity Resolution: 0.008%RHBME280 Pressure Operating Range: 30,000 Pa to 110,000PaBME280 Pressure Absolute Accuracy: ±100PaBME280 Pressure Relative Accuracy: ±12PaBME280 Pressure Resolution: 0.18PaBME280 Altitude Range: 0ft to 30,000ft (9.2km)BME280 Altitude Relative Accuracy: 3.3ft (1m) at sea level, 6.6 (2m) at 30,000ftPower LED: Power LEDVoltage Regulator: 1.8V AP2127K Voltage Regulator (for ENS160)Pull-up Resistors: 2.2kΩ Pull-up ResistorsJumper: Power LEDJumper: I2C Pullup ResistorsJumper: Selectable AddressesENS160 Selectable Addresses: 0x53 (Default) or 0x52A good fit for rapid LoRaWAN® sensor prototyping where Digi X-ON, Qwiic sensors and Arduino-based firmware development are part of the project.","vendor":"SparkFun","product_type":"LoRaWAN IoT Kit","in_stock":true,"options":[],"variants":[{"id":15777,"title":"Default Title","sku":"SF-KIT-27213","mpn":"KIT-27213","price":934.15,"on_sale":false,"in_stock":true,"available_quantity":7}]}