{"title":"INA237 Qwiic Current Sensor","handle":"sparkfun-current-sensor-ina237-qwiic","url":"/products/sparkfun-current-sensor-ina237-qwiic","description":"Monitor DC current and power over I2C with this Qwiic breakout based on the Texas Instruments INA237 digital power monitor. It measures current, bus voltage, internal temperature and power for an in-line DC input using a 16-bit delta-sigma ADC.The board is set up for flexible wiring: use the pair of Qwiic connectors and 3-pin screw terminal for a solderless power monitor setup, or solder to the 0.1\"-spaced plated through-hole header for VCC, GND, SDA, SCL and alert. A shunt resistor is pre-populated, with through-hole pins available if you need to fit a custom shunt value.The multi-purpose open-drain alert pin can report conversion completion or threshold events, helping your microcontroller stay asleep until attention is needed. SparkFun provides supporting documentation including schematic, KiCad files, board dimensions, hookup guide, INA237 datasheet, SparkFun INA2XX Arduino Library and GitHub repository.Features:Threshold Alerts: Triggers that instantly alert you if voltage, current, power, or internal temperature values exceed your programmed limits.Fast Response: A rapid 75 microsecond alert response time to protect your sensitive electronics.Flexible Sampling: Selectable ADC conversion times from 50µs to 4.12ms and hardware averaging from 1 to 1024 samples.Qwiic Connectors: 2x Qwiic ConnectorsScrew Terminal: 1x 3-Pin Screw TerminalExternal Shunt: Optional external shunt resistor connectionsVBUS Isolation: VBUS Isolated from IN± by defaultThrough Hole Header: 0.1\"-spaced Through Hole HeaderHeader Signals: Power (VCC/GND), I2C (SDA/SCL) and AlertPower LED: Red Power LEDSpecifications:ADC: 16-Bit Delta-Sigma ADCOffset Voltage: ±50 µV (max)Offset Drift: ±0.02 µV/°C (max)Gain Error: ±0.3% (max)Gain Error Drift: ±50 ppm/°C (max)Common Mode Rejection: 120 dB (max)Power Monitoring Accuracy: 1.6% full scale, -40°C to +125°C (max)Alert Response Time: 75 µSCommon Mode Range: -0.3 V to +85 VBus Voltage Sensing Input: 0 V to 85 VShunt Full-Scale Differential Range: ±163.84 mV / ±40.96 mVI2C Interface: 2.94MHz high-speed I2C interface.Available I2C Addresses: 4 Available I2C Addresses (Selected by solder jumpers)Default Address: 0x40Supply Voltage: 2.7 V to 5.5 VOperational Current: 640 µA (typ)Shutdown Current: 5 µA (max)Qwiic Connectors: 2x Qwiic ConnectorsScrew Terminal: 1x 3-Pin Screw TerminalMax Power Rating: 85V/10AIN± Shunt Resistor: 10mΩ (Default)External Shunt Resistor Connections: Optional external shunt resistor connectionsVBUS Isolation: VBUS Isolated from IN± by defaultThrough Hole Header: 0.1\"-spaced Through Hole HeaderHeader Signals: Power (VCC/GND), I2C (SDA/SCL) and AlertPower LED: Red Power LEDA handy breakout for battery-powered projects, power profiling, DC load monitoring and any build that needs INA237 measurements through the SparkFun Qwiic ecosystem.","vendor":"SparkFun","product_type":"Current Sensor","in_stock":true,"options":[],"variants":[{"id":16419,"title":"Default Title","sku":"SF-SEN-31437","mpn":"SEN-31437","price":18.65,"compare_at_price":0.0,"on_sale":false,"in_stock":true,"available_quantity":117}]}