{"title":"RP2040 Stamp","handle":"rp2040-stamp","url":"/products/rp2040-stamp","description":"\nA hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger, reset btn, and Neopixel. Breaks out all GPIO+USB+SWD+BOOTSEL+RST\n\nThe RP2040 Stamp is a hand-solderable SMD/TH module that integrates the Raspberry Pi RP2040 MCU with 8MB of FLASH, an LDO, LiPo charge management (including a charge LED), a reset button, and a Neopixel.\nIt breaks out all the GPIOs as well as USB, SWD, BOOTSEL, RST, and the voltage pins.\nIf you want to get into the technical stuff, see the RP2040 Stamp Datasheet to learn even more!\nThe Stamp was created to allow you to use the Raspberry Pi RP2040 in your designs without having to solder small-pitch QFN chips or worry about lots of external circuitry.\n\nAll you need to get you started is a 5V supply or a LiPo battery. The Stamp will take care of the charging and switching the power sources.\n\nThe castellated edges with 2mm pitch can be hand-soldered directly to a carrier board or by using pin headers. You can find footprints for many PCB programs including KiCad (5 and 6), Eagle CAD, and EasyEDA here.\nAt only 1 by 1 inch (25mm x 25mm), the Stamp packs a lot of features:\n\n8MB of FLASH\n500mA 3.3V LDO\nAll 30 GPIOs broken out\nA Neopixel\nLiPo supply and charging circuit (with charging LED)\nUSB broken out\nSWD broken out\nReset Button\n12MHz crystal\n\nand of course, everything that comes with the Raspberry Pi RP2040 itself:\n\nDual core ARM Cortex-M0+ @ 133MHz\n264kB SRAM\n2 UARTs\n2 SPIs\n2 I2Cs\n16 PWM channels\nUSB with Host and Device support\n\nThe RP2040 MCU comes with a pre-programmed ROM UF2 Bootloader, by pulling the BOOTSEL pin low and resetting, or by double-pressing the RESET button (if the FW supports it), you can upload new firmware using the USB disk drive.\nThe RP2040 Stamp board comes pre-flashed with CircuitPython 7.1.0-beta.1, if you want to use it with CircuitPython, it's recommended that you check for the latest version and if there is one, update it according to the method mentioned above.\nIn addition to the Stamp, we also offer a reference design - the RP2040 Stamp Carrier.\nSpecs and Docs\nSource Code\nDocumentation\nDesign Files\n","vendor":"Little Bird","product_type":"physical","in_stock":false,"options":[],"variants":[{"id":2304,"title":"Default Title","sku":"PR-SP011","price":27.6,"compare_at_price":0.0,"on_sale":false,"in_stock":false,"available_quantity":0,"option1":"Default Title"}]}