RFID Reader Module(.NET Gadgeteer Compatible)

$26.95

Part Number:  DF-TOY0019
Brand:  DFRobot Australia

Introduction This product has retired since Janurary 27, 2015.   This RFID Reader Module is .NET Gadgeteer compatible, which uses the .NET Micro Framework to make writing code for your device as easy as writing a desktop, Web or Windows Phone application. It is an contactless reader module based on the MFRC522 from NXP B.V.. Communication Via Serial makes it simple and easy-using. Compatible with...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
Introduction This product has retired since Janurary 27, 2015.
 
This RFID Reader Module is .NET Gadgeteer compatible, which uses the .NET Micro Framework to make writing code for your device as easy as writing a desktop, Web or Windows Phone application.

It is an contactless reader module based on the MFRC522 from NXP B.V.. Communication Via Serial makes it simple and easy-using. Compatible with ISO/IEC 14443 A/MIFARE cards, it supports all variants of the MIFARE Mini, MIFARE 1K, MIFARE 4K, MIFARE Ultralight, MIFARE DESFire EV1 and MIFARE Plus RF identification protocols, and the operating distance in Read/Write mode is up to 40 mm.
 
This module could be used in a variety of applications: Access management, Tracking of goods, Tracking of persons and animals, Toll collection and contactless payment, Machine readable travel documents, Smartdust (for massively distributed sensor networks), Tracking sports memorabilia to verify authenticity, Airport baggage tracking logistics and etc.
NOTE: SDK or drivers for Gadgeteer platform not included. Drivers are a community maintained projects, for contributions please forward directly to Github or Codeplex.
Specification
  • .NET Gadgeteer Compatible
  • Power supply 3.3 V
  • Support ISO/IEC 14443 A/MIFARE
  • Support mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
  • Operating distance in Read/Write mode up to 50 mm
  • FIFO buffer handles 64 byte send and receive
  • Serial interface
  • Working current: 13~26mA
  • Idle current: 10—13mA
  • Working temperature: -25 ~ 85℃
  • Size: 47mm×62mm
Gadgeteer interface definition
  • PIN1: +3.3V Power +3.3V
  • PIN2: +5V Power +5V
  • PIN3: IRQ interrupt request
  • PIN4: TX serial transmit port
  • PIN5: RX serial receive port
  • PIN6: R reset
  • PIN7: NC no use
  • PIN8: NC no use
  • PIN9: NC no use
  • PIN10: GND ground
NOTE: SDK or drivers for Gadgeteer platform not included. Drivers are a community maintained projects, for contributions please forward directly to Github or Codeplex.
Documents Shipping List
  • RFID Reader Module(.NET Gadgeteer Compatible) x1
  • Cable for Gadgeteer x1