{"title":"Pycom SiPy (Europe/Japan/Korea) - Sigfox+WiFi+Bluetooth MicroPython IoT Platform","handle":"pycom-sipy-europe-japan-korea-sigfox-wifi-bluetooth-micropython-iot-platform","url":"/products/pycom-sipy-europe-japan-korea-sigfox-wifi-bluetooth-micropython-iot-platform","description":"The SiPy from Pycom is a multi-network IoT development board combining Sigfox, WiFi, and Bluetooth (classic + BLE) on a single ESP32-powered module. Programmable with MicroPython and the Pymakr IDE, it enables rapid IoT application development with network failover for added resilience.\n\nThis is the RCZ1/RCZ3 version for Sigfox zones covering Europe (868 MHz), Japan, and Korea. The SiPy can also operate in FSK mode for direct device-to-device communication, with another SiPy acting as a Nano-Gateway to forward data to the cloud via WiFi.\n\nKey Features\n\n\nTriple Connectivity – Sigfox (+14 dBm), WiFi 802.11b/g/n (1 km range), and Bluetooth (classic + BLE)\n\nESP32 Dual-Core – Dedicated network processor + free application processor\n\nMicroPython – Program in Python with the Pymakr IDE\n\nUltra-Low Power – ULP coprocessor monitors GPIOs/ADC in deep sleep at 25 µA\n\nUp to 50 km Sigfox Range – Long-range LPWAN connectivity\n\nBreadboard Compatible – Standard pin spacing (with headers)\n\nCertified – CE, FCC, IC, and RCM\n\n\nSpecifications\n\n\nMCU – Espressif ESP32\n\nSigfox Zones – RCZ1 (868 MHz, Europe), RCZ3 (Japan, Korea)\n\nSigfox Tx Power – +14 dBm (Europe)\n\nWiFi – 802.11b/g/n, 16 Mbps\n\nBluetooth – Classic + BLE\n\nRAM – 512 KB\n\nFlash – 4 MB\n\nGPIO – Up to 24\n\nADC – 8× 12-bit channels\n\nInterfaces – 2× UART, 2× SPI, I²C, I²S, microSD\n\nTimers – 4× 16-bit with PWM and input capture\n\nSecurity – SSL/TLS, WPA Enterprise, AES/SHA/MD5/DES encryption\n\nInput Voltage – 3.3–5.5 V\n\n3.3 V Output – Up to 400 mA\n\nDimensions – 55 × 20 × 3.5 mm (without headers)\n\nWeight – 7 g\n\n\nPower Consumption\n\n\nWiFi Active – 12 mA\n\nWiFi Standby – 5 µA\n\nSigfox Rx (Europe) – 17 mA\n\nSigfox Tx (Europe) – 47 mA\n\nSigfox Standby – 0.5 µA\n\n\n\nWarning: Using the Sigfox radio without an external antenna can damage the device and is not recommended. An external antenna must be connected before transmitting.\n\n\nIdeal For\n\nSigfox LPWAN IoT deployments in Europe, Japan, and Korea\nMulti-network applications with WiFi/Sigfox failover\nRemote sensing and environmental monitoring\nRapid MicroPython prototyping\n","vendor":"Pimoroni","product_type":"physical","in_stock":false,"options":[],"variants":[{"id":6519,"title":"Default Title","sku":"PI-PYC002","price":92.46,"on_sale":false,"in_stock":false,"available_quantity":0,"option1":"Default Title"}]}