Piezo Sensor - LDT1-028K Lead Attachments Seeed Studio SS-SEN139A3M Australia

Piezo Sensor - LDT1-028K Lead Attachments

$11.55

Part Number:  SS-SEN139A3M
Brand:  Seeed Studio Australia

The LDT1-028K is a multi-purpose, piezoelectric sensor for detecting physical phenomena such as vibration or impact. The piezo film element is laminate to a sheet of polyester (Mylar), and produces a useable electrical signal output when forces are applied to the sensing area. The dual wire lead attached to the sensor allows a circuit or monitoring device to process the signal. Applications:  Sensing direct contact...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
The LDT1-028K is a multi-purpose, piezoelectric sensor for detecting physical phenomena such as vibration or impact. The piezo film element is laminate to a sheet of polyester (Mylar), and produces a useable electrical signal output when forces are applied to the sensing area. The dual wire lead attached to the sensor allows a circuit or monitoring device to process the signal.

Applications: 

Sensing direct contact force, Recording time of an event, Counting number of impact events, Measuring impact-related events, Sensing vibration using cantilevered beam, Wakeup switch, Motion detection

Features:
  • Piezoelectric polymer
  • Multi-purpose
  • Vibration sensing
  • Impact sensing
  • Laminated
  • Dual wire lead attached
  • Minimum impedance: 1 MΩ
  • Preferred impedance: 10 MΩ and higher
  • Output voltage: 10mV-100V depending on force and circuit impedance
  • Storage temperature: -40°C to +70°C [-40°F to 160°F]
  • Operating temperature: 0°C to +70°C [32°F to 160°F]
Documents

Please visit Seeed Studio's wiki page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.