{"title":"Mini Sparkle Motion with Pre-soldered Terminal Block","handle":"mini-sparkle-motion-with-pre-soldered-terminal-block-ada6314","url":"/products/mini-sparkle-motion-with-pre-soldered-terminal-block-ada6314","description":"The Adafruit Sparkle Motion Mini is part of our series of \"Sparkle Motion\" boards, which are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie makes a lot of projects with WLED, and she loves it! So, how can we make something powerful enough to drive advanced LED projects that need a compact design?The Mini version of the Sparkle Motion is a simpler version of our full-featured Sparkle Motion; we give up the high voltage support and built-in IR receiver, to make it under 1 square inch in size!\nThis version includes a pre-soldered terminal block, that means no soldering is required to get started: a small screwdriver will get you going instantly. However, the board is bulkier and the terminal block overlaps half of one of the breakout pads.By using a 4-layer board and double-sided assembly, we've put together this feature set:\n\nPower via USB Type C for up to 5V 4A input - you can use off-the-shelf USB battery packs for portable operation.\n\n4 Amp resetting fuse to protect from over-current drive\n\nESP32 mini module with built-in antenna port - the classic ESP32 has the best WLED support even if we'd prefer the 'S2 or 'S3. Comes with 4 MB of flash, dual core 240MHz Tensilica, WiFi, Bluetooth® LE, and Bluetooth® Classic support.\n\nUSB-serial converter with auto-reset\n\nTwo output signals plus 5V power and ground - both signal output are level shifted to 5V. These are on 0.1\" spaced breakout pads.\n\nExtra 2x3 0.1\" breakout pads with 4 more GPIO plus 3V power and ground.\nBuilt-in I2S microphone\n\nStemma QT I2C port to connect external sensors/OLED/etc\n\nUser button on GPIO 0 plus Reset button\n\nRed built-in LED on pin 12\n\nSmall built-in NeoPixel on pin 18 \n\nSeparate analog/digital input JST port for analog input, potentiometer, microphone, or external IR receiver on pin 13\n\nCompact enough you can use it for wearable projects - 1.2\"x0.8\" / 30mm x 20mm size with mounting holes\nWhile we recommend it for use with WLED, it will also work fine as a compact ESP32 board for use with Arduino, ESP-IDF, MicroPython, CircuitPython, or any other ESP32-supported codebase.Comes as a fully assembled driver board with a 3.5mm terminal blockAlso, unlike the bigger version, we dropped the on-board IR receiver; however, it's easy to add one by plugging in a JST SH 3-pin socket cableand slotting in an IR receiver module.","vendor":"Adafruit","product_type":"physical","in_stock":false,"options":[],"variants":[{"id":307,"title":"Default Title","sku":"AF-6314","mpn":"ADA6314","price":37.99,"compare_at_price":0.0,"on_sale":false,"in_stock":false,"available_quantity":0,"option1":"Default Title"}]}