Makeblock XY-Plotter Robot Kit (With Electronics)

$472.16

Part Number:  DF-KIT0054
Brand:  DFRobot Australia

Introduction This kit can be used to build a XY-Plotter. You can use the XY-Plotter to build a lot of interesting applications such as a drawing robot. It works very well, precise and stable.We also offer some electronic modules for driving this plotter. You may save about 30$ of the electronic parts with this kit.   Features: Strong aluminum extrusion parts, anodizing surface Two Metal stepper motor with back...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
Introduction This kit can be used to build a XY-Plotter. You can use the XY-Plotter to build a lot of interesting applications such as a drawing robot. It works very well, precise and stable.We also offer some electronic modules for driving this plotter. You may save about 30$ of the electronic parts with this kit.  

Features:
  • Strong aluminum extrusion parts, anodizing surface

  • Two Metal stepper motor with back shaft

  • 12V Solenoid 

  • Me-2H Microstep Driver 

  • Me-Series Electronic Modules for easy using and programmng

  • Demo code about Drawing Robot

  • Closed type bushing block and ball bushing insert for use in linear motion applications

  • Four-bolt aluminum alloy bushing block for a lightweight ready-to-mount installation

  • Synthetic resin retainer plate for accurate ball guidance and low noise

  • Four rows of recirculating balls inside the ball bushing for smooth running

  • Integral lip seals to retain lubricant and protect against contamination

  • Round steel shaft for use with slide units in linear motion applications.

  • Chrome plated for corrosion resistance

  • Case hardened for wear resistance

  • Precision ground for consistent ball bushing radial clearance

Note:

 

With the electronic modules we offer, you can use this kit to build a drawing robot as the demo video shows. We also offer the Arduino codes of it and also the Android App for sending your picture to the robot by Bluetooth. But it is just a demo one, you can write your own one and make a development of it. The power supply is 12V.

 

Kit Includes:

 

Mechanical Parts:

 
4 × Linear Motion Shaft D8×480 2 × Plate 3×6 20 × Plastic Rivet 4120
6 × Linear Motion Slide Unit 8mm 2 × Stepper Motor Bracket 25 × Plastic Ring 4x7x2mm
1 × Solenoid-12V 4 × Timing Pulley 90T 10 × Plastic Ring 4x8x1mm
2 × Beam 0824-496 8 × Timing Pulley Slice 90T 35 × Screw M4×8
1 × Beam 0824-144 1 × Open-end Timing Belt (3m) 60 × Screw M4×14
3 × Beam 0824-128 3 × Link Rod 2 × Srew M2×30
1 × Beam 0824-96 2 × Shaft Connector-4 40 × Nylong Lock Nut M4
3 × Beam 0824-80 3 × Threaded Shaft 4×31mm 20 × Nut M4
1 × Beam 0808-80 3 × Shaft Collar 4mm 15 × Nylon Cable Ties
1 × General Bracket 4 × Flange Bearing 4x8x3mm 1 × Cross Screwdriver
2 × Bracket 3x6 8 × Headless Set Screw M3x5 1 × Screwdriver 3mm
14 × Bracket 3×3 15 × Countersunk Screw M3x8 2 × Screwdriver 1.5mm
 

 

 

Electronic parts:

 
1 × Meduino
1 × Acrylic Arduino Bracket
1 × Me-BaseShield
2 × Stepper motor driver
1 × Me-Bluetooth modules
2 × Me-Limit Switch
1 × USB Cable
3 × 6P6C RJ11 cable-20cm
2 × 6P6C RJ11 cable-50cm
 

 


Documents