Laser Engraver Upgrade Pack(500mW) for Makeblock XY-Plotter Robot Kit V2.0

$215.58

Part Number:  DF-KIT0089
Brand:  DFRobot Australia

Introduction Laser Engraver Upgrade Pack is for XY Plotter Robot Kit V2.0, it can engrave by laser. Note: The higher output power of the laser, the better processing capacity it is.  The 500mW laser engraver can do better engraving and cutting ability, it takes less time and more efficient than the 250mW laser engraving.   Follow the instruction, assembly the lasers elements to the assembled...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
Introduction
Laser Engraver Upgrade Pack is for XY Plotter Robot Kit V2.0, it can engrave by laser.

Note: The higher output power of the laser, the better processing capacity it is. 

The 500mW laser engraver can do better engraving and cutting ability, it takes less time and more efficient than the 250mW laser engraving.  
Follow the instruction, assembly the lasers elements to the assembled XY Plotter Robot Kit V2.0 and upload the firmware to the Me Baseboard. You can use Benbox Laser Engraver to control the laser engraver robot to engrave fabulous artworks. 

For reference video as below: (https://www.youtube.com/watch?v=Y2Hj5XXX_hc).

This kit can be used to build a moving platform, wheeled robot or tracked robot, different wheel configuration and track configuration are avaliable. a robot arm and a robot gripper can be added on the moving robot, there are spare parts for building other kind of structure. The robot arm is driven by a DC motor through timing belt transition mechanism.
Specification
  • Frame: Anodized aluminum
  • Physical Dimensions(L×W×H): 620mm × 620mm×140mm
  • Engrave materials: Wood boards, colorful paper cards, dark opaque acrylic, foam papers, etc.
  • Cutting materials: Colorful paper cards, foam papers, etc.
  • Working area (X×Y): 300mm×350mm
  • XY Resolution: 0.1mm
  • Max Speed: 50mm/s
  • Power: 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A
  • Software:Benbox Laser Engraver
  • Supports file type: JPG,PNG,BMP,GIF,DXF
  • Connections: USB
  • Electronics: Makeblock Me Orion(Based on Arduino Uno)
Documents Shipping List
  • Bracket 3x6  x1
  • HEX Screwdriver 2.5mm  x1
  • Cross Screwdriver 3mm  x1
  • Socket Cap Screw M4x8-Botton Head  x4
  • Countersunk Screw M3x8  x4
  • Nylon Cable Ties  x5
  • Motor Cable Jeck plug  x1
  • 450-500mW blue-violet Laser Components  x1
  • DC power cord 5.5*2.1MM  x1
  • Foot pads  x4