{"title":"Kitronik Tricolour LED Board","handle":"kitronik-tricolour-led-board","url":"/products/kitronik-tricolour-led-board","description":"\n  The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has been designed such that its power requirement is within the supply rating of a computer USB port (under 100mA).\n\nThe Tri-Colour board features 15 LEDs; 5 x green, 5 x blue, and 5 x Red running in three colour rows down the length of the board. This allows for edge-lit designs featuring three separately lit acrylic sign parts, making it a great platform for more ambitious and imaginative designs.\n\nThe PCB is approximately 75mm long, 17mm wide, and is provided with a pair of M3 mounting holes, and sets of alignment holes to align 3mm (nominal) acrylic with the LEDs. The side-mounted switch can be used to turn on/off the LEDs. An additional switch can be connected in parallel with the PCB switch to allow remote mounting within an enclosure.\n\nWhen using a remote switch the PCB-mounted switch should be left switched to ‘Off’. The remote switch is wired across the pads marked +5V and Switched Voltage.\n\nPower is supplied to the tri-colour board via a Micro USB power connector. It is possible to connect a non-USB power supply to the board via the 5V and 0V pads. Caution: voltages over 5.5V may cause damage to the board. Wire to +5V and 0V to use the onboard switch, or wire the 5V to a remote switch and then into the Switched Voltage and 0V pads to use a remote switch.\n\nIt is possible to wire one switch to control several boards simultaneously. Caution: voltages over 5V may cause permanent damage to the board.\n\n\nFeatures:\n\n\nLevel up your edge-lit signs, static displays, and illustrations with the TriColour LED board.\n5 LEDs; 5 x green, 5 x blue, and 5 x Red running in three colour rows down the length of the board.\nIt has been designed such that it is within the supply rating of a computer USB port (under 100mA).\nThe PCB is approximately 75mm long, 17mm wide.\nThere are two M3 mounting holes.\nThe LEDs are controlled by an onboard on/off switch, there are also pads to allow you to connect a remote switch.\nPower is supplied to the board via a Micro USB power connector.\nThe board also features power pads to allow for powering via a non-USB power source.\nOne remote on/off switch can be used to multiple boards simultaneously.\n\n\nContents:\n\n1 x Kitronik TriColour LED board.\n\nDimensions:\n\n\nLength: 75mm.\nWidth: 17mm.\nMax Height: 7mm.\n\n\n","vendor":"Kitronik","product_type":"physical","in_stock":true,"options":[],"variants":[{"id":1654,"title":"Default Title","sku":"KI-35164","price":7.21,"compare_at_price":0.0,"on_sale":false,"in_stock":true,"available_quantity":8,"option1":"Default Title"}]}