Gyro Breakout Board - IDG500 Dual 500°/s

$47.43

Part Number:  DF-SEN0031
Brand:  DFRobot Australia

Introduction This is the breakout board for the IDG500 from DFRobot, which includes an on-board 2.8V regulator and all pins broken out to 0.1" pin holes. The IDG-500 is a very small,  dual-axis angular rate sensor (gyroscope). It uses InvenSense’s proprietary and patented MEMS technology with vertically driven, vibrating masses to make a functionally complete, low-cost, dual-axis angular rate sensor. All required electronics are integrated...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
Introduction
This is the breakout board for the IDG500 from DFRobot, which includes an on-board 2.8V regulator and all pins broken out to 0.1" pin holes. The IDG-500 is a very small,  dual-axis angular rate sensor (gyroscope). It uses InvenSense’s proprietary and patented MEMS technology with vertically driven, vibrating masses to make a functionally complete, low-cost, dual-axis angular rate sensor. All required electronics are integrated onto a single chip with the sensor. 
 
The IDG-500 gyro uses two sensor elements with novel vibrating dual-mass bulk silicon configurations that sense the rate of rotation about the X- and Y-axis (in-plane sensing). This results in  a unique, integrated dual-axis gyro with guaranteed-by-design vibration rejection and high cross-axis isolation. It is specifically designed for demanding consumer applications requiring low cost, small size and high performance. 
 
The IDG-500 gyro includes the integrated electronics necessary for application-ready functionality. It incorporates X- and Y-axis low-pass filters and an EEPROM for on-chip factory calibration of the sensor. Factory trimmed scale factors eliminate the need for external active components and end-user calibration. This product is lead-free and Green Compliant. 
 
 
 
 

Specification
  • Power supply: 3~8v(VIN)
  • System voltage: 3.3v
  • Integrated X- and Y-axis gyros on a single chip  
  • Two separate outputs per axis for standard and high sensitivity: 
  • X-/Y-Out Pins:  500°/s full scale range  2.0mV/°/s sensitivity 
  • X/Y4.5Out Pins:  110°/s full scale range 9.1mV/°/s sensitivity 
  • Integrated amplifiers and low-pass filters 
  • Auto-Zero function  
  • On-chip temperature sensor 
  • High vibration rejection over a wide frequency range 
  • High cross-axis isolation by proprietary MEMS design
  • Hermetically sealed for temp and humidity resistance 
  • 10,000 g shock tolerant
  • Size: 23.4x22.6mm
 
 

Documents
Shipping List
  • Gyro Breakout Board - IDG500 Dual 500°/s    x1
  • 9P Pin Headers      x1