{"title":"KnowFlow Basic Water Monitoring Kit","handle":"gravity-knowflow-basic-kit-a-diy-water-monitoring-basic-kit","url":"/products/gravity-knowflow-basic-kit-a-diy-water-monitoring-basic-kit","description":"Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Bluno controller provides built-in Bluetooth so readings can be viewed from a smartphone. The kit is based around the DFRobot Gravity sensor ecosystem, making it easy to modify or expand with additional modules.This basic version includes pH and EC sensing only. For temperature measurement, add a compatible waterproof DS18B20 sensor kit separately. DFRobot recommends using a 200mmx150mmx75mm waterproof case and an acrylic plate to mount the KnowFlow sensors.Included: Bluno (DFR0267) x1; Gravity: Analog pH Sensor / Meter Kit For Arduino (SEN0161-V2) x1; Gravity: Analog Electrical Conductivity Sensor / Meter For Arduino (DFR0300) x1; Gravity: IO Expansion Shield for Arduino V7.1 (DFR0265) x1; Gravity: I2C SD2405 RTC Module (DFR0469) x1; MicroSD card module for Arduino (DFR0229) x1; Gravity: Analog Signal Isolator (DFR0504) x1; SD/MicroSD Memory Card (16GB Class10 SDHC with Adapter) (FIT0394) x1; Analog sensor cable x2; Digital sensor cable x1.Features:pH, EC auto recordMicro-SD Local storageExtensible designplug and playBluetooth built-inSpecifications:Bluno Microcontroller: IncludedOn-board BLE chip: TI CC2540Wireless Programming: via BLEBLE configuration: Support AT command to config the BLESerial communication: Transparent communication through SerialBLE firmware: Upgrade BLE firmware easilyDC Supply: USB Powered or External 7V~12V DCMicrocontroller: Atmega328pBootloader: Arduino Uno (disconnect any BLE device before uploading a new sketch)Pin mapping: Compatible with the Arduino Uno pin mappingSize: 60mm * 53mm (2.36\"*2.08\")Weight: 30gpH sensor: IncludedModule Power: 5.00VModule Size: 43 x 32mm (1.69x1.26\")Measuring Range: 0 - 14PHAccuracy: ± 0.1pH (25 ℃)Response Time: ≤ 1minpH Sensor: with BNC ConnectorInterface: pH2.0 Interface (3 foot patch )Adjustment: Gain Adjustment PotentiometerIndicator: Power Indicator LEDEC sensor: IncludedOperating Voltage: +5.00 VPCB Size: 45 × 32mm(1.77x1.26\")Measuring Range: 1ms/cm -- 20ms/cmOperating Temperature: 5 - 40 ℃Accuracy: ±10% F.S (using Arduino 10 bits ADC)Interface: PH2.0 Interface (3-pin SMD)Conductivity Electrode: Electrode Constant K = 1,BNC connectorCable Length of the Electrode: about 60cm(23.62\")Indicator: Power IndicatorAnalog Signal Isolator: IncludedOperating Voltage: 5.0VResponse Time: 4 seconds (Typ)Analog Error (both ends): ± 20mV (Typ)Interface Type: PH2.0-3PNo load Current: 75mADimension: 42 * 32mm / 1.65 * 1.26 inchNon-isolated Terminal: Arduino SideSupply Voltage: 5.0 ± 0.1VAnalog Output: 0 ~ 5.0VIsolated Terminal: Sensor SideOutput Voltage: 5.0 ± 0.2VAnalog Input: 0 ~ 5.0VA good fit for water quality investigation, pollution sourcing, environmental education and open science projects using Arduino-compatible hardware.","vendor":"DFRobot","product_type":"Water Quality Monitoring Kit","in_stock":true,"options":[],"variants":[{"id":15630,"title":"Default Title","sku":"DF-KIT0131","mpn":"KIT0131","price":525.14,"on_sale":false,"in_stock":true,"available_quantity":3}]}