{"title":"FLIR Lepton 2.5 Thermal Imaging Module","handle":"flir-lepton-2-5-thermal-imaging-module","url":"/products/flir-lepton-2-5-thermal-imaging-module","description":"The FLIR Lepton® 2.5 is a compact radiometric long wave infrared (LWIR) camera module for adding thermal imaging and non-contact temperature measurement to embedded electronics, mobile devices and custom instruments.Its 80 × 60 active pixel focal plane array captures calibrated temperature data in every pixel, making it useful as either an IR sensor or a thermal image sensor. Video data is delivered over SPI, with control via a CCI interface that is I2C-like.This socket-version module uses a 32-pin mechanical interface to a standard Molex® socket. Supporting documentation includes the datasheet, getting started guide, engineering datasheet, software interface description document and an introduction to thermography basics.Specifications:Effective Frame Rate: 8.6 Hz (commercial application exportable)Input Clock: 25-MHz nominal, CMOS IO Voltage LevelsOutput Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied)Pixel Size: 17 µmRadiometric Accuracy: High gain: Greater of +/- 5°C or 5% (typical) Low gain: Greater of +/- 10°C or 10% (typical)Scene Dynamic Range: -10-140 °C (high gain); up to 450°C (low gain) typicalSpectral Range: Longwave infrared, 8 µm to 14 µmTemperature Compensation: Automatic. Output image independent of camera temperature.Thermal Sensitivity: <50 mK (0.050° C)Video Data Interface: Video over SPIControl Port: CCI (I2C-like), CMOS IO Voltage LevelsPackage Dimensions - Socket Version (w x l x h): 11.8 x 12.7 x 7.2 mmMechanical Interface: 32–pin socket interface to standard Molex® socketNon-Operating Temperature Range: -40 °C to +80 °COptimum Temperature Range: -10°C to +80°CShock: 1500 G @ 0.4 msArray format: 80 × 60, progressive scanFOV - Diagonal: 63.5°FOV - Horizontal: 50° (nominal)Image Optimization: Factory configured and fully automatedNon-Uniformity Correction (NUC): Automatic with shutterSensor Technology: Uncooled VOx microbolometerSolar protection: IntegralInput Supply Voltage: 2.8 V, 1.2 V, 2.5 V to 3.1 V IOPower Dissipation: 150 mW (operating), 650 mW (during shutter event), 4 mW (standby)A specialised module for makers and engineers building thermal cameras, temperature monitoring systems or IR sensing prototypes.","vendor":"SparkFun","product_type":"Thermal Imaging Module","in_stock":true,"options":[],"variants":[{"id":15998,"title":"Default Title","sku":"SF-SEN-16465","mpn":"SEN-16465","price":489.25,"on_sale":false,"in_stock":true,"available_quantity":219}]}