Evaluation Board for MLX90614 IR Thermometer

$97.02

Part Number:  DF-SEN0107
Brand:  DFRobot Australia

Introduction This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Arduino) 8MHz bootloader. Code can be loaded through the FTDI basic interface and the Arduino environment.   The MLX9061 sensor is a high precision, small size, single zone IR thermometer with an optional SMBus (two-wire) or PWM interface. The ATMega328 comes...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)
Introduction
This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500 (Arduino) 8MHz bootloader. Code can be loaded through the FTDI basic interface and the Arduino environment.
 
The MLX9061 sensor is a high precision, small size, single zone IR thermometer with an optional SMBus (two-wire) or PWM interface. The ATMega328 comes with demo code that gives a temperature readout in degrees F at 38400bps. You can use a 3.3V FTDI Basic to connect to the board.
 
NOTE: The label on the FTDI header is incorrect. It should read VCC instead of 3.3v. We will fix this error in the next revision.
 
 
Specification
  • ATMega328 w/ 8MHz STK500 (Arduino) bootloader
  • MLX90614 IR sensor, 3V version
  • Power and status LEDs
Documents
Shipping List
 
  • Evaluation Board for MLX90614 IR Thermometer x1