{"title":"Adafruit Sparkle Motion - All-In-One WLED and xLights Board","handle":"adafruit-sparkle-motion-all-in-one-wled-and-xlights-board-ada6100","url":"/products/adafruit-sparkle-motion-all-in-one-wled-and-xlights-board-ada6100","description":"The Adafruit Sparkle Motion is an all-in-one ESP32-based smart LED driver designed for WLED and xLights installations. It packs dual power options, three level-shifted LED outputs, built-in audio and IR sensors, and a STEMMA QT port into a compact, wearable-friendly board — ready to drive addressable LEDs straight out of the box.\n\nWhether you're building custom lighting effects, interactive displays, or large-scale xLights installations, Sparkle Motion handles it all. It's also fully compatible with Arduino, ESP-IDF, MicroPython, and CircuitPython for custom firmware development.\n\nKey Features\n\n\nESP32 Module – Dual-core 240 MHz Tensilica, 4 MB flash, Wi-Fi, Bluetooth LE, and Bluetooth Classic\n\nUSB-C Power Delivery – Slide switch to select 5V, 12V, or 20V output (24V pixels typically run fine at 20V)\n\n2.1 mm DC Jack – Alternative power input (centre positive)\n\n5A Rated – Low forward-voltage diodes and 5A fuse for overcurrent protection\n\nThree Output Terminal Blocks – Power, ground, and 5V level-shifted data signal; supports 20–26 AWG wire\n\nFourth Level-Shifted Output – Additional GPIO pads with three more GPIO pins\n\nI2S Microphone – Built-in for audio-reactive lighting\n\nIR Receiver – Onboard infrared receiver for remote control\n\nSTEMMA QT I2C Port – Connect external sensors, OLEDs, and accessories\n\nAnalogue/Digital Input Port – JST connector for potentiometers, microphones, or external IR receivers\n\nUser Button + Reset Button – GPIO 0 user button and dedicated reset\n\nStatus Indicators – Red LED on pin 4 and onboard NeoPixel on pin 2\n\nCompact Size – 33 × 45 mm with mounting holes\n\n\nIdeal For\n\nWLED and xLights smart LED installations\nAudio-reactive lighting effects\nWearable and costume lighting\nInteractive displays and IoT lighting setups\n\n\nPackage Contents\n\n1× Adafruit Sparkle Motion board with pre-installed terminal blocks\n\n\n\nTip: Pre-installed terminal blocks accept 20–26 AWG stranded or solid core wires — just use a flat-head screwdriver to secure connections.\n","vendor":"Adafruit","product_type":"physical","in_stock":false,"options":[],"variants":[{"id":680,"title":"Default Title","sku":"AF-6100","mpn":"ADA6100","price":61.24,"compare_at_price":0.0,"on_sale":false,"in_stock":false,"available_quantity":0,"option1":"Default Title"}]}