{"title":"Adafruit Proto Tripler PiCowbell for Pico and PicoW","handle":"adafruit-proto-tripler-picowbell-for-pico-and-picow-ada5967","url":"/products/adafruit-proto-tripler-picowbell-for-pico-and-picow-ada5967","description":"The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT connector, EYESPI display connector, a built-in NeoPixel, and prototyping areas.\n\nEach socket has a double row of pins so you can poke jumper wires directly in without a breadboard. The hollow sockets also allow plug-through from the back using Pico Stacking Headers. All pins are clearly labelled on the silkscreen.\n\nKey Features\n\n\nTriple 2×20 Socket Headers – Pre-soldered; plug in a Pico plus two PiCowBell accessories with an extra row of sockets per pin\n\nLiPo/Li-Ion Charging – JST PH connector with 500 mA charge rate (adjustable to 250 mA via jumper); orange LED while charging, green when complete\n\nAlkaline/NiMH Support – Cut a jumper to disable the charger for 3×AA or 3×AAA battery packs\n\nPower Slide Switch – Connected to Pico Enable pin to disable the 3.3V supply\n\nReset Button – Right-angle button at the board edge\n\nSTEMMA QT / Qwiic Connector – JST SH for I2C on GPIO 4 (SDA) and GPIO 5 (SCL), with extra breakout holes\n\nEYESPI Connector – 18-pin FPC for SPI displays with SD card and touchscreen support\n\nBuilt-In NeoPixel – On-board RGB LED for status feedback\n\nPrototyping Area – 3-hole connected strips in centre areas, plus duplicate hole pads next to nearly every Pico pin\n\nPower Rails – Dedicated 3.3V and ground strips; ground pads marked with white silkscreen\n\n4 Mounting Holes – For attachment to an underplate or enclosure\n\nGold-Plated Pads – For reliable soldering\n\n\n\nNote: The EYESPI connector does not wire through Busy or Reset pins, so E-Ink displays are not recommended as they may require those pins for deep-sleep and wake-up.\n\n\nAlso Consider\n\n\nProto Doubler PiCowbell – Two-slot version if you only need one PiCowbell accessory\n\n\nIdeal For\n\nSolder-free multi-accessory Pico projects\nBattery-powered portable Pico builds with display output\nPrototyping with easy pin access via extra socket rows\nCombining multiple PiCowbell accessories with EYESPI displays\n\n\nPackage Contents\n\n1× Adafruit Proto Tripler PiCowbell (assembled with triple socket headers, battery connector, slide switch, reset button, STEMMA QT, EYESPI, and NeoPixel)\n\n\n\nNote: Raspberry Pi Pico, battery, PiCowbell accessories, and EYESPI display are sold separately. If using alkaline/NiMH batteries, cut the \"disable charge\" jumper first.\n","vendor":"Adafruit","product_type":"physical","in_stock":true,"options":[],"variants":[{"id":1026,"title":"Default Title","sku":"AF-5967","mpn":"ADA5967","price":19.75,"compare_at_price":0.0,"on_sale":false,"in_stock":true,"available_quantity":103,"option1":"Default Title"}]}