{"title":"NeoRGB STEMMA NeoPixel to RGB PWM LED & Strip Driver","handle":"adafruit-neorgb-stemma-neopixel-to-rgb-pwm-leds-and-strips","url":"/products/adafruit-neorgb-stemma-neopixel-to-rgb-pwm-leds-and-strips","description":"This handy STEMMA board lets you control 'true analog' LED strips and other PWM-able LEDs from a NeoPixel-compatible data line, without the usual extra wiring of separate driver FETs. A WS2811F handles the 800KHz NeoPixel signal and drives AO3406 N-channel FETs, so a common-anode RGB strip or LED assembly can be treated like a single NeoPixel.It’s designed for quick hookup, with a 2mm JST PH connector on one end and a 5-pin 0.1\" screw terminal block on the other. The current revision also adds a built-in level shifter, helping it work properly with either 3V or 5V NeoPixel signals. Onboard status LEDs show power and signal activity, and there’s an output signal pin for chaining another board or passing data on to other NeoPixels.The three PWM channels make it useful for more than just RGB strips: you can also drive three independent single-channel LEDs or strips, larger analog LEDs, or LED arrays. It suits common-anode loads from 3V to 16VDC at up to 3 Amps per channel, but it does not support RGBW strips because the WS2811 only provides three channels.Specifications:STEMMA connector: 2mm JST PH connectorTerminal block: 5-pin 0.1\" screw terminal blockInput signal: standard 3-5V 800KHz NeoPixel-compatible signalController chip: WS2811FOutput transistors: AO3406 N-channel FETsCurrent capability: 3 Amps per channelRon: 50milliOhmSupported load: PWM-able common-anode RGB LED strip or LEDSupply voltage: 3-16VDCJST PH current rating: 2AChannel count: 3Revision history: As of February 13, 2025 - this design was updated to add a built-in level shifter so it will work flawlessly with 3V or 5V NeoPixel signals.Product dimensions: 24.5mm x 17.9mm x 10.3mm / 1.0\" x 0.7\" x 0.4\"Product weight: 3.3g / 0.1ozYou’ll need a 2mm JST PH cable for the STEMMA input. If your total load is over 2A across all three channels, power the LEDs through the terminal block rather than the JST PH connector, which is only rated for 2A.","vendor":"Adafruit","product_type":"LED Driver Board","in_stock":true,"options":[],"variants":[{"id":15543,"title":"Default Title","sku":"AF-5888","mpn":"ADA5888","price":11.82,"on_sale":false,"in_stock":true,"available_quantity":100}]}