{"title":"Adafruit Mini Skinny NeoPixel Digital RGB LED Strip - 144 LED/m [1m BLACK]","handle":"adafruit-mini-skinny-neopixel-digital-rgb-led-strip-144-led-m-1m-black","url":"/products/adafruit-mini-skinny-neopixel-digital-rgb-led-strip-144-led-m-1m-black","description":"The Mini Skinny NeoPixel strip packs 144 individually addressable RGB LEDs into just one metre, with an ultra-narrow 7.5 mm wide flexible PCB. This is the black PCB version — identical specs to the white variant, just with a different-coloured flex strip for a more discreet look.\n\nEach LED is controlled by a built-in WS2812B driver, giving you full 24-bit colour (8-bit per channel) on every pixel. Only a single data pin is needed, and once you set your colours, the strip continues to drive the LEDs without further commands. Cut every 7 mm (1 LED) and solder to 0.1\" pads to customise the length.\n\nKey Features\n\n\n144 LEDs per Metre – High-density addressable RGB pixels for smooth, continuous lighting effects\n\nUltra-Narrow – Only 7.5 mm wide (without casing) for tight-space installations\n\nSingle-Pin Control – One digital output drives the entire strip via the WS2812B protocol\n\n24-Bit Colour – 8-bit PWM per red, green, and blue channel on every LED\n\nChainable – Connect multiple strips end to end (watch your current budget)\n\nCuttable – Trim at any LED with cut lines every 7 mm\n\nWeatherproof Sheathing – Flexible PCB comes with a protective silicone sleeve\n\nJST SM Connectors – 2 or 3-pin connectors on each end with separated power/ground wires\n\n\n\nWarning: These strips must be powered at 5 V DC. Do not exceed 6 V or the entire strip may be permanently damaged.\n\n\nPower Requirements\n\n\nMaximum draw – ~40 W per metre (8 A at 5 V) with all LEDs on full white\n\nTypical draw – Less than one-third of maximum for colourful patterns\nRecommended: 5 V 2 A supply for short sections, or 5 V 10 A supply for full-metre runs\n\n\nIdeal For\n\nWearable electronics and cosplay costumes\nHigh-density LED art and light installations\nAmbilight-style TV backlighting\nCompact lighting effects in tight spaces\n\n\nPackage Contents\n\n1× 1 m Mini Skinny NeoPixel Strip – 144 LED/m, black PCB (with weatherproof sheathing)\n\n\n\nNote: Multiple-quantity orders ship as separate 1 m reels, not as a single continuous strip. Requires a microcontroller with precise timing (Arduino, Feather, Raspberry Pi). Not compatible with interpreted/virtual machine processors or boards slower than 8 MHz.\n\n\nResources\n\n\nNeoPixel Uberguide – Comprehensive guide with wiring, code examples, and best practices\n","vendor":"Adafruit","product_type":"physical","in_stock":false,"options":[],"variants":[{"id":11134,"title":"Default Title","sku":"AF-2970","price":126.72,"on_sale":false,"in_stock":false,"available_quantity":0,"option1":"Default Title"}]}