{"title":"Adafruit DPI TFT Kippah for Raspberry Pi with Touch Support","handle":"adafruit-dpi-tft-kippah-for-raspberry-pi-with-touch-support","url":"/products/adafruit-dpi-tft-kippah-for-raspberry-pi-with-touch-support","description":"The Adafruit DPI TFT Kippah with Touch Support connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. This version adds resistive touchscreen capability via USB, making it suitable for interactive projects and kiosks.\n\nCompatible with Raspberry Pi B+, A+, Pi 2, Pi 3 and Zero, this board works best with 5\" and 7\" 40-pin TTL TFT displays at 800×480 resolution. The display output is native, delivering full graphics acceleration, instant refresh, and 18-bit colour — the same quality you'd expect from an HDMI connection.\n\nKey Features\n\n\nDirect DPI Connection – No HDMI encoder/decoder needed; native GPU-accelerated output\n\nResistive Touch Support – USB touchscreen controller built in\n\n18-Bit Colour – High-quality display output with full graphics acceleration\n\n40-Pin TTL TFT Support – Works with 5\" and 7\" displays at 800×480\n\nHAT Form Factor – Snaps directly onto the Raspberry Pi GPIO header\n\nFully Assembled – Ready to use with software configuration\n\n\nSpecifications\n\n\nGPIO Usage – Pins 2–21 (inclusive) are used by the display\n\nAvailable Pins – GPIO #22, #23, #24, #25, #26, #27 remain free\n\nCompatibility – Raspberry Pi B+, A+, Pi 2, Pi 3, Zero\n\nOS Support – Tested with Raspbian; other operating systems not guaranteed\n\n\nAlso Available\n\nDPI TFT Kippah – Without Touch Support\n\n\nIdeal For\n\nInteractive touchscreen kiosks and displays\nCompact embedded Raspberry Pi projects\nCost-effective touch-enabled display solutions\nDedicated single-display applications\n\n\nPackage Contents\n\n1× DPI TFT Kippah circuit board with touch support (fully assembled and tested)\n\n\n\nNote: TFT display, Raspberry Pi, USB cable, and FPC extension cable sold separately. A soldering iron may be needed to adjust the backlight via a PCB jumper.\n\n\n\nImportant: This board uses GPIO pins 2–21, leaving only six GPIO pins available. HDMI/composite output is disabled when using the Kippah — both cannot operate simultaneously.\n","vendor":"Adafruit","product_type":"physical","in_stock":true,"options":[],"variants":[{"id":9313,"title":"Default Title","sku":"AF-2453","price":41.04,"on_sale":false,"in_stock":true,"available_quantity":22,"option1":"Default Title"}]}