Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries

The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 2A or less (500mA is best). We suggest our Micro Lipo charger, which has a 100mA default rate. You can also set the Micro Lipo to 500mA rate for a faster charge.

Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1 C or even less - 100 to 500mA is a good rate, and available from any USB port if using a USB-powered charger


Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies

//www.youtube.com/embed/6wSZWXRm830?start=181

 

  • Dimensions: 60mm x 36mm x 7mm / 2.4" x 1.4" x 0.3"
  • Weight: 34g
  • Nominal Capacity: 2000mAh ±2%
  • Nominal Voltage: 3.7V
  • Standard Charge Current: ~0.2C / 0.5A
  • Charge Cut-Off Voltage: 4.2V
  • Standard Discharge Current: ~0.2C / 0.5A
  • Battery Datasheet
  • MSDS Report
 
Stack in some power to your Arduino
Portable solar charger
Retropie in your pocket!
Hack your existing charger and build your own portable charger
Build a tiny handheld raspberry pi portable computer
Find the perfect power pack
Boost your cell phone or mobile device with this 3-D printed battery and charger
Build a Daft Punk Thomas Helmet with bluetooth control!
Master the legacy weapon of the Covenant!
Subtly Shifting Lights and Lace
Portable RetroPi with the smallest Pi yet
Make your Circuit Playground mobile and change direction via sound
Light up the night with a glowing chair!
Build a Weather Station with ESP8266
A Multipurpose Enclosure for Adafruit Feather

(AF-2011)

SKU AF-2011
Brand Adafruit

Be The First To Review This Product!

Help other Little Bird Company Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category