Wearable Sensors

SKU: SF-SEN-27314 | Brand: SparkFun

SpectraFlex is a flexible bend sensor for measuring angular deflection in research, industrial and personal electronics projects. As the sensor bends, its resistance changes, making it suitable for reading movement or...

SKU: DF-SEN0705 | Brand: DFRobot

This flexible tactile pressure sensor gives your project a compact 4 x 8 pressure matrix for mapping contact across a small surface. It integrates 32 independent sensing points in a 20 x 10mm active area, making it us...

SKU: DF-SEN0704 | Brand: DFRobot

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...

SKU: M5-U029 | Brand: Little Bird

Description HEART is build with MAX30100.. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides ...

SKU: PI-PSA001 | Brand: Pimoroni

The Pulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino. It detects pulse by measuring changes in reflected light as blood pumps through your tissues, providing a real-time analogue signal that fluctua...

SKU: PL-1696 | Brand: Pololu

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area...

SKU: AF-4429 | Brand: Adafruit

This 13.56 MHz RFID/NFC sewable button uses an NTAG213 chip in a compact 24 mm laundry-tag form factor. It can be sewn into garments, attached to equipment, or embedded in projects for contactless identification, data...

SKU: DF-SEN0086 | Brand: DFRobot

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power G...

SKU: SF-DEV-23387 | Brand: SparkFun

The MyoWare® 2.0 Wireless Shield is designed to take in readings from the MyoWare 2.0 Muscle Sensor and wirelessly transmit sensor data with the ESP32-WROOM! This shield also includes a built-in LiPo battery to remote...

SKU: PI-AT-04-001 | Brand: Pimoroni

The MyoWare Muscle Sensor is an all-in-one electromyography (EMG) sensor that measures the filtered and rectified electrical activity of a muscle. It outputs 0 V to Vs (supply voltage) depending on the level of activi...

SKU: AF-4043 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC silicone bracelet contains an NTAG203 chip with 144 bytes of writable EEPROM storage. It is passively powered — no battery is needed. Hold the bracelet a few centimetres from a compatible...

SKU: PR-PIM318 | Brand: Little Bird

A complete Bearables Fox Kit with coloured LED badge, light sensor, thread, needles, and battery.  Sewable, hackable, wearable, adorable! Bearables is a range of woodland-themed wearable LED badges and sensors. W...

SKU: PR-PIM319 | Brand: Little Bird

A complete Bearables Bear Kit with coloured LED badge, motion sensor, thread, needles, and battery.  Sewable, hackable, wearable, adorable! Bearables is a range of woodland-themed wearable LED badges and sensors....

SKU: PR-PIM316 | Brand: Little Bird

An adorable acorn-shaped motion sensor designed to work with Bearables wearable LED badges. When you move or tilt the acorn, the connected badge's LEDs light up — bringing your wearable creation to life with simple, d...

SKU: DF-SEN0065 | Brand: DFRobot

This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the fo...

SKU: SF-KIT-27920 | Brand: SparkFun

This all-in-one electromyography (EMG) kit gives you the MyoWare 2 boards needed to experiment with different muscle-sensing setups. Depending on how you configure it, you can visualise muscle activity with the MyoWar...

SKU: SF-KIT-27922 | Brand: SparkFun

Build and test wireless muscle-sensing projects with this Arduino-compatible electromyography (EMG) kit from the MyoWare 2 ecosystem. It centres on the MyoWare 2 Muscle Sensor, which measures muscle activity from the ...

SKU: SF-KIT-27921 | Brand: SparkFun

This all-in-one MyoWare 2 electromyography (EMG) kit gives you the essentials for measuring and visualising muscle activity. It is Arduino-compatible, but the included setup is designed to follow the standalone exampl...