Standoffs & Screws

SKU: SF-PRT-26991 | Brand: SparkFun

This small machine screw is a handy fastener for electronics projects, enclosures, brackets and other light-duty assemblies that use 4-40 hardware.It has a Phillips drive and pan head, with a zinc-finished steel const...

SKU: SF-PRT-28764 | Brand: SparkFun

This M2.5-0.45 machine screw is a small Phillips-head fastener suited to electronics assemblies, enclosures and board mounting jobs.The 8.0mm long thread is handy for Raspberry Pi pHAT standoffs and other compact hard...

SKU: SF-PRT-26986 | Brand: SparkFun

This round steel SMT spacer provides an internal M2.5 thread for creating a compact threaded mounting point directly on a PCB or assembly.It is reflow compatible, so it can be placed during surface-mount assembly and ...

SKU: SF-PRT-25464 | Brand: SparkFun

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful ...

SKU: SF-PRT-28007 | Brand: SparkFun

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The...

SKU: SF-PRT-28005 | Brand: SparkFun

This spacer board gives your FPGA stack a little extra breathing room. It adds 5.6mm of space between stacked boards, helping make room for the included heatsink.It is also handy when you need clearance for cables bet...

SKU: SF-PRT-28765 | Brand: SparkFun

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mo...

SKU: SF-TOL-18471 | Brand: SparkFun

These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them...

SKU: SF-TOL-18472 | Brand: SparkFun

These threaded inserts are a handy way to add strong, reusable fixing points to a jig, fixture or machine wasteboard. Place a few exactly where you need hold-down points, or install them in a grid pattern to turn a wa...

SKU: SF-KIT-24115 | Brand: SparkFun

Keep your electronics bench ready for the next enclosure, PCB stack or prototype with this 210-piece brass standoff kit. It covers two common PCB hardware sizes, M3 and M2.5, with a mix of standoff heights, nuts, scre...

SKU: SF-PRT-10316 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for lifting a PCB off the bench or mounting a board neatly inside an enclosure.It is 3/8" long and tapped for a 4-40 screw, making it handy for projects that use common ...

SKU: SF-PRT-26989 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for raising a PCB off a surface or mounting it neatly inside an enclosure. It is tapped for a 4-40 screw and measures 3/4" long.Use it to give your board clearance from ...

SKU: LB-PT91039 | Brand: Little Bird

Great for Arduino and Raspberry Pi!Package Included: 10 x Copper female-Female seat (M3 * 20 mm) 10 x Copper female-Female seat (M3 * 30 mm) 10 x Copper male-Female seat (M3 * 10 +6 mm) 10 x Copper male and femal...

SKU: PI-COM2101 | Brand: Pimoroni

Specifically selected for Pi HATs and pHATs this standoff selection also includes male to female standoffs to allow you to stack your boards securely Contents 4 x 10mm M2.5 F-F standoff 4 x 10mm M2.5 M-F stando...

SKU: PI-COM2100 | Brand: Pimoroni

Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT/p...

SKU: PL-1075 | Brand: Pololu

This M3, pan-head screw is 5 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: SF-PRT-10228 | Brand: SparkFun

A simple and versatile angle bracket with one threaded and one unthreaded 4-40 hole. Use it for connecting PCBs at 90° angles, mounting accelerometers, gyros, and other sensors, or attaching components to universal pl...

SKU: PL-1964 | Brand: Pololu

This #4-40, pan-head screw is 1 1/4″ (1.25″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1952 | Brand: Pololu

Hexagonal male-female aluminium standoffs designed specifically for the Raspberry Pi. The 11mm spacing is the ideal height for mounting expansion boards with standard-size female headers, and the M2.5 threads fit the ...

SKU: PL-1039 | Brand: Pololu

The hardware kit for the Pololu 3pi robot expansion board. This contains the standoffs, screws, nuts, and headers needed to mount an expansion PCB above the 3pi robot — but does not include the expansion PCB itself. U...