Standoffs & Screws

SKU: WS-24985 | Brand: Waveshare

Metal Flat Key Shaft Flange Plate, Suitable For Using with Serial Bus Servo, Compatible With Various Transmission Parts Metal Flat Key Shaft Flange Plate Using with serial bus servo for...

SKU: AF-1155 | Brand: Adafruit

A sturdy cast aluminium corner brace for joining 20×20mm aluminium extrusion at 90° angles. Stronger than extruded corner supports, with two mounting holes for a secure connection between extrusion pieces. Key Featur...

SKU: DF-FIT0181 | Brand: DFRobot

This is a high quality 2-pin screw terminal. Very useful when you want to connect 24-18AWG wires to your circuits. SPECIFICATIONS Rated voltage: 300V Rated current: 10A Contact resistence: ...

SKU: SF-PRT-15432 | Brand: SparkFun

These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.Sold individually.Features: Screw, Thr...

SKU: AF-1259 | Brand: Adafruit

A heavy-duty cast aluminium double corner brace for joining 20×20mm aluminium extrusion at 90° angles. Stronger than extruded corner supports, with four mounting holes (two per side) for a more secure and rigid connec...

SKU: SF-PRT-08995 | Brand: SparkFun

Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units.

SKU: SF-PRT-08993 | Brand: SparkFun

A standard Phillips head machine screw with 2-56 thread and a length of 9.5 mm (3/8"). Compatible with 2-56 nuts for securing panels, button pads, and small electronic assemblies. Specifications Head Type – Phillip...

SKU: SF-PRT-26991 | Brand: SparkFun

This small machine screw is a handy fastener for electronics projects, enclosures, brackets and other light-duty assemblies that use 4-40 hardware.It has a Phillips drive and pan head, with a zinc-finished steel const...

SKU: SF-PRT-28764 | Brand: SparkFun

This M2.5-0.45 machine screw is a small Phillips-head fastener suited to electronics assemblies, enclosures and board mounting jobs.The 8.0mm long thread is handy for Raspberry Pi pHAT standoffs and other compact hard...

SKU: SF-PRT-26986 | Brand: SparkFun

This round steel SMT spacer provides an internal M2.5 thread for creating a compact threaded mounting point directly on a PCB or assembly.It is reflow compatible, so it can be placed during surface-mount assembly and ...

SKU: SF-PRT-25464 | Brand: SparkFun

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful ...

SKU: SF-PRT-28765 | Brand: SparkFun

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mo...

SKU: SF-PRT-10316 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for lifting a PCB off the bench or mounting a board neatly inside an enclosure.It is 3/8" long and tapped for a 4-40 screw, making it handy for projects that use common ...

SKU: SF-PRT-26989 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for raising a PCB off a surface or mounting it neatly inside an enclosure. It is tapped for a 4-40 screw and measures 3/4" long.Use it to give your board clearance from ...