Sensors

SKU: PI-BIB002 | Brand: Pimoroni

Binary's UFO is a robot maker kit that combines flat-pack cardboard construction with real sensors and coding using the BBC micro:bit. Build the flying saucer, connect the included sensors and LED strip, then program ...

SKU: PR-PIM316 | Brand: Little Bird

An adorable acorn-shaped motion sensor designed to work with Bearables wearable LED badges. When you move or tilt the acorn, the connected badge's LEDs light up — bringing your wearable creation to life with simple, d...

SKU: PR-PIM214 | Brand: Little Bird

The Automation pHAT is a compact home monitoring and automation controller for Raspberry Pi in the smaller pHAT form factor. With a relay, three analogue channels, buffered inputs, and sinking outputs — all 24V tolera...

SKU: SF-SEN-15050 | Brand: SparkFun

The SparkFun Triad Spectroscopy Sensor combines three AS7265x spectral sensors with onboard UV, visible, and IR LEDs to measure light across 18 individual frequencies — from 410 nm (UV) to 940 nm (IR). It brings light...

SKU: LB-00321 | Brand: Little Bird

The Sharp GP2Y0A02YK0F is an infrared distance measuring sensor with a detection range of 20 to 150 cm. It uses triangulation — combining an infrared emitter (IRED) and a position-sensitive detector (PSD) — to output ...

SKU: SF-SEN-14480 | Brand: SparkFun

The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes, the H3LIS331DL is great for ...

SKU: MR-CB-KT-THRESHOLD-1 | Brand: Modular Robotics

The Threshold is a THINK Cubelet with a knob to alter the behavior of your robots. It will output a value of zero until its inputs exceed the threshold set by the knob. Above this threshold data will flow normally....

SKU: AF-1778 | Brand: Adafruit

The AD8495 from Analog Devices is an analog-output K-type thermocouple amplifier on a compact breakout board. Simply power the board with 3–18V DC, connect a K-type thermocouple to the terminal block, and read the tem...

SKU: DF-SEN0047 | Brand: DFRobot

This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower t...

SKU: DF-SEN0065 | Brand: DFRobot

This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the fo...

SKU: DF-SEN0090 | Brand: DFRobot

The XL-MaxSonar-AE0 offers a wide and sensitive beam pattern for indoor use. This makes the XL-MaxSonar-AE0 an excellent choice wherever wide beam detection, reliable people detection, or reliable small obstacle de...

SKU: DF-SEN0089 | Brand: DFRobot

The XL-MaxSonar-EZ0 offers a wide and sensitive beam pattern for indoor use. This makes the XL-MaxSonar-EZ0 an excellent choice wherever wide beam detection, reliable people detection, or reliable small obstacle de...

SKU: DF-SEN0066 | Brand: DFRobot

The FlexiForce is a thin, flexible piezoresistive force sensor that measures applied pressure from 0 to 100 lbs (440N). The harder you press on the circular sensing area, the lower the sensor's resistance — from effec...

SKU: DF-FIT0005-OE | Brand: DFRobot

This mounting bracket is designed for Sharp GP2D12/2D15/Sharp GP2Y0A02YK IR ranger sensor. You can buy this item using 250 reward points. Specification Size:45x20x15mm(1.77x0.79x0.59") Mountin...

SKU: SF-SEN-14049 | Brand: SparkFun

The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over its entire -55°C to +125°C operating range, the devi...

SKU: SF-SEN-14032 | Brand: SparkFun

It’s back! This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tight, the LIDAR-Lite v3 soars. The LIDAR-Lite v3 is the ideal...

SKU: DF-SEN0146 | Brand: DFRobot

The USB-ProxSonar-EZ1 has a detection zone of ~5 feet and will allow for 8+ simultaneous sensors. The USB-ProxSonar-EZ ultrasonic proximity sensors feature an easy to use USB interface that connects directly to a...

SKU: SF-SEN-12041 | Brand: SparkFun

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use d...

SKU: SF-SEN-11862 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple...

SKU: DF-TEL0083-A | Brand: DFRobot

This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. T...