Sensors

SKU: DF-SEN0617 | Brand: DFRobot

The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...

SKU: AF-5767 | Brand: Adafruit

The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing ove...

SKU: SF-SEN-21219 | Brand: SparkFun

The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge, because it integrates Syntiant’s powerful NDP120 Neural Decision processor to run multiple AI algorithms, ...

SKU: SF-BOB-16912 | Brand: SparkFun

The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard po...

SKU: SF-GPS-18378 | Brand: SparkFun

The SparkFun MicroMod GNSS Function Board features a u-blox NEO-M9N 92-channel GNSS receiver, supporting concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations with approximately 1.5 m horizontal acc...

SKU: SF-GPS-19663 | Brand: SparkFun

With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GNSS Real Time Kinematics (RTK) has mastered d...

SKU: SF-SEN-19764 | Brand: SparkFun

A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwii...

SKU: DF-SEN0408 | Brand: DFRobot

The Fermion H3LIS200DL is an ultra-low-power, low-noise triple-axis accelerometer with user-selectable full-scale ranges of ±100g and ±200g. Capable of measuring accelerations with output data rates from 0.5 Hz to 1 k...

SKU: DF-SEN0443 | Brand: DFRobot

The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer(±2/4/8/16g), a 3-axis gyroscope(±125/250/500dps), and on-chip 16-bit ADCs. With up to ±1% initial sensitivity and low noise(6...

SKU: DF-SEN0423 | Brand: DFRobot

A high-precision digital barometric pressure sensor breakout based on the Bosch BMP390L. Designed for industrial-grade applications, it delivers exceptional temperature stability, low drift, and ultra-low power consum...

SKU: AF-4464 | Brand: Adafruit

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...

SKU: AF-4535 | Brand: Adafruit

The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...

SKU: SF-SEN-17241 | Brand: SparkFun

The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...

SKU: EF-EF04087 | Brand: ElecFreaks

Octopus BME280 Pressure Sensor is an electric brick, which has integrated temperature sensor, air pressure sensor and humidity sensor onboard. We can use it to measure humidity, temperature and air pressure, or eve...

SKU: AF-4634 | Brand: Adafruit

Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis ...

SKU: SF-KIT-15948 | Brand: SparkFun

Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an ea...

SKU: AF-4502 | Brand: Adafruit

The Adafruit ISM330DHCX is an industrial-quality 6-DoF IMU from ST, combining a 3-axis accelerometer and 3-axis gyroscope on a single silicon die for synchronised measurements. With an extended gyroscope range of ±400...

SKU: SF-DEV-15162 | Brand: SparkFun

The SparkFun gator:bit v2.0 is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads t...

SKU: PI-COM0205 | Brand: Pimoroni

The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...

SKU: AF-1032 | Brand: Adafruit

A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion capture and inertial measurement (that is - you can tell how an object...